• 제목/요약/키워드: longitudinal zone

검색결과 185건 처리시간 0.024초

터널 3차원 절대변위 해석기법을 이용한 막장전방지반 예측 (Prediction of Ground Condition Changes Ahead of Tunnel Face Using Three-Dimensional Absolute Displacement Analysis)

  • 방준호;한일영
    • 한국터널지하공간학회 논문집
    • /
    • 제8권2호
    • /
    • pp.101-113
    • /
    • 2006
  • 안정된 암반에 터널을 굴착하는 경우 아칭효과에 의해 막장주변에 응력재배치가 발생하고 터널 막장 전방에 연약대가 존재하는 경우 응력재배치가 충분히 이루어지지 않아 막장과 연약대 사이의 응력집중으로 인해 변위가 발생하게 된다. 만일 막장에 근접하여 측점에서 종방향, 횡방향, 연직방향의 3차원 절대좌표가 측정되는 경우 막장전방의 지반거동이 반영된 3차원 절대변위가 산정되고, 이러한 3차원 절대변위의 분석을 통해 막장전방의 지반조건을 예측할 수 있게 된다. 본 연구에서는 4개 현장에서 측정된 3차원 변위비의 경향선과 천단침하의 영향선/경향선 분석을 실시하여 연약대 위치를 추정하였고, 3차원 절대변위의 분석에 의해 추정된 연약대 위치를 동일한 구간에서의 TSP탐사로 추정된 연약대 위치와 비교함으로써 3차원 절대변위 해석기법의 현장 적용성을 검증하였다.

  • PDF

우리나라 다목적댐 인공호들의 규모에 따른 연별.계절별 수질변이 및 상.하류간 종적구배 특성 (Interannual and Seasonal Variations of Water Quality in Terms of Size Dimension on Multi-Purpose Korean Dam Reservoirs Along with the Characteristics of Longitudinal Gradients)

  • 한정호;이지연;안광국
    • 생태와환경
    • /
    • 제43권2호
    • /
    • pp.319-337
    • /
    • 2010
  • 본 연구는 우리나라 인공호들에서 연별 계절별 수질변이 특성 및 상 하류 간 수질의 종적구배 특성을 파악하기 위해 2003~2007년의 자료(물환경정보시스템)의 월별, 연별, 공간별(유수대, 전이대, 정수대)의 수질자료를 비교 평가하였다. 10개의 물리적, 화학적, 생물적 수질 변수를 이용하였으며, 인공호들의 일반 수질 특성, 수리수문학적 수질 특성, 시간적 수질변이 특성, 공간적 수질 변이 특성을 분석하였다. 저수면적, 유역면적, 유입량, 방류량을 기준으로 9개의 인공호에 대하여 유사도 분석을 실시하였으며, 그 결과 대형인공호(충주호, 대청호, 소양호), 중형인공호(안동호, 용담호, 주암호, 합천호), 소형인공호(횡성호, 부안호)로 크게 3개 그룹으로 나누어졌고, 유역 크기별로 비슷한 수질 양상을 나타냈다. 홍수의 해(2003년)와 가뭄의 해(2005년)로 대별하여 수질 자료를 분석한 결과, pH, DO, BOD, SS, TN, TP, CHL, EC는 Rz에서 Lz으로 갈수록 값이 감소하였고, SD는 LZ으로 갈수록 값이 증가하였다. 이러한 결과는 인공호내의 영양물질과 부유물질의 침강작용 및 광제한으로 인한 CHL의 감소가 SD 값의 증가에 영향을 미친 것으로 사료되었다. 각 지점별 pH, DO, SS, SD, EC는 가뭄의 해인 2005년에 컸고, BOD, COD, TN, TP, CHL은 홍수의 해인 2003년에 높게 나타났다. 공간적인 수질분포 특성을 분석하기 위하여 9개 인공호의 Rz, Tz, Lz에서의 TN, TP, CHL, SD의 수치를 비교하였다. 그 결과, TN, TP, CHL은 Rz에서 Lz으로 갈수록 침강작용에 의해 그 값이 감소하였고, SD는 반대 양상을 보였다. TN과 TP 사이에서 상관 관계를 분석한 결과, 두 수질 변수 사이의 상관성은 유의하지 않은 것으로 나타났다. 대형 인공호의 CHL-SD 모델에서 Rz, Lz의 경우를 제외하고, TP-CHL, CHL-SD는 유의한 상관성이 있는 것으로 나타났으며, TP-CHL의 상관관계는 중형인공호의 Rz ($R^2$=0.2401, p<0.0001, N=239)에서 유의한 상관성을 보이는 것으로 나타났다. CHL-SD의 상관관계에서도 중형인공호가 가장 높게 나타났으나 TP-CHL의 상관관계와는 반대되는 역상관 관계를 나타냈다. 대청호, 안동호, 횡성호를 Rz, Tz, Lz에서 수질자료를 분석한 결과, 대청호에서 수질자료의 값이 구간별로 큰 변이성을 보이는 것으로 나타났는데, 이는 대청호가 대형인공호로서 구간 간 거리가 멀고, 수심이 깊어 Rz, Tz, Lz의 구간 간 특성이 뚜렷하게 구분된 것으로 사료되었다.

국내 경전철 주행중 이상진동에 대한 시험적 평가 (An Experimental Evaluation for an abnormal vibration on running of the Domestic LRT (Light Rail Transit))

  • 양희주;우관제;이강운;성재호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.1321-1326
    • /
    • 2011
  • THE RAILWAY VEHICLE IS CONSISTS OF CARBODY, BOGIE AND WHEELSETS, EACH OF COMPONENTS IS CONNECTED WITH RIGID MASS, SPRING AND DAMPER. EACH OF COMPONENTS HAS TRANSLATION MOTIONS OF LONGITUDINAL (X AXIS), LATERAL (Y AXIS) AND VERTICAL (Z AXIS) DIRECTIONS, ROTATION MOTIONS OF X, Y, Z AXIS WHICH ARE NAMED ROLLING, PITCHING AND YAWING. THE VIBRATION MODE OF RAILWAY VEHICLE IS DIFFICULT TO FIND THE CHARACTERISTICS OF MOTION DURING THE OPERATION ON THE TRACK BECAUSE THESE HAPPEN TO INDEPENDENCE OR DUPLICATION MOTION CAUSED BY VEHICLE, WHEEL/RAIL AND TRACK IRREGULARITY ETC. IT IS NAMED AN ABNORMAL VIBRATION THAT THE VIBRATION, WHICH WAS PASSED THE PRIMARY AND SECONDARY SUSPENSION, IS AFFECTED TO THE PASSENGER WITHOUT DAMPING. THIS PAPER DESCRIBES AN EXPERIENCE EVALUATION TO FIND THE CAUSE OF AN ABNORMAL VIBRATION WHICH WAS HAPPEN AT OPERATING SPEED 60KPH ZONE DURING THE MAINLINE TEST.

  • PDF

Three-dimensional modelling of water flow due to leakage from pressurized buried pipe

  • Zhu, Hong;Zhang, Limin;Chen, Chen;Chan, Kit
    • Geomechanics and Engineering
    • /
    • 제16권4호
    • /
    • pp.423-433
    • /
    • 2018
  • A three-dimensional model is constructed to simulate water infiltration in an unsaturated slope from a leaking pipe. Adaptive mesh refinement and time stepping are used, assisted by an automatic procedure for progressive steepening of the hydraulic property function for better convergence. The model is justified by comparing the simulated results with experimental data. Steady-state flow is investigated considering various pipe water pressures, locations and sizes of the opening, and soil layering. The opening size significantly affects the soaked zone around the pipe. Preferential flow dominates along the pipe longitudinal direction in the presence of a loose backfill around the pipe.

유한요소해석에 의한 슬리팅가공에 관한 연구 (A Study on the Slitting Working by Finite Element Analysis)

  • 한규택;서종근
    • 동력기계공학회지
    • /
    • 제5권3호
    • /
    • pp.56-63
    • /
    • 2001
  • A slitter is a sort of machinery to cut sheet materials in rolls continuously in the longitudinal direction. Recently slitter line users have requiring higher quality and precision in products in addition to high productivity. A finite element analysis has been performed to investigate the effect of processing factors on shear planes in the slitting of Shrinkage Band(S,K.B.). For the analysis, Hot-dip 55% aluminum-zinc alloy-coated steel sheets and coils(SAZCC) is selected as a material. The results obtained are that deformation was concentrated along the very narrow zone and the maximum slitting load decreases by increasing the knife clearance. Also effective strain decreases according to the clearance increases.

  • PDF

고주파 유도용접 현상의 3차원 해석 (Three Dimensional Analysis of High Frequency Induction Welding Phenomena)

  • 김현중;윤성기
    • 대한기계학회논문집A
    • /
    • 제30권7호
    • /
    • pp.865-872
    • /
    • 2006
  • High frequency induction welding is widely employed for longitudinal seam welding of small scale tubes and pipes because of its relatively high processing speed and efficiency. This research is aimed at understanding the variables that affect the quality of the high frequency induction welding. The welding variables include the welding frequency, weld speed, V-angle and tube thickness. Temperature distribution of the tube is calculated through three dimensional coupled electromagnetic and thermal FE analysis. The skin and proximity effects are considered in the electromagnetic analysis. The influence of the impeder is also analyzed. The effects of the operating welding variables on the temperature distribution are investigated quantitatively by exhibiting the heat affected zone (HAZ). The results explain the mechanism of significant enhancement of welding efficiency when the impeder is used. The proper welding conditions without the overheated edge are obtained through FE analysis.

A First Record of the Genus Eusynstyela (Ascidiacea: Stolidobranchia: Styelidae) from Korea

  • Seo, Su-Yuan;Rho, Boon-Jo
    • Animal Systematics, Evolution and Diversity
    • /
    • 제30권4호
    • /
    • pp.323-326
    • /
    • 2014
  • Colonial ascidian, Eusynstyela monotestis (Tokioka, 1953), is newly reported from Korean waters. The specimens of E. monotestis examined in this study were collected at subtidal zone of Beomseom, Munseom, Seopseom and Chagwido in Jeju-do by SCUBA diving. The genus Eusynstyela Michaelsen, 1904 is also new to Korean waters and it is distinct from other genera by having branchial sac with folds, longitudinal stigmata, hermaphrodite gonads on both sides, 1-2 male follicles in each gonad and body wall with endocarps. Eusynstyela monotestis is distinct from other species by having gonad with only single male follicle. In this paper, detailed descriptions and photographs of Eusynstyela monotestis (Tokioka, 1953) are provided.

핵융합로 블랭킷용 저방사화 철강재료 TIG 용접부의 강도특성 (Strength Characteristics of Reduced Activation Ferritic Steel for Fusion Blanket by TIG Welding)

  • 윤한기;이상필;김동현
    • Journal of Welding and Joining
    • /
    • 제21권1호
    • /
    • pp.87-92
    • /
    • 2003
  • JLF-1 steel (Fe-9Cr-2W-V-Ta), reduced activation ferritic steel, is one of the promising candidate materials for fusion reactor applications. Tensile properties of JLF-1 base metal and its TIG weldments has been investigated at the room temperature, $400^{\circ}C$ and $600^{\circ}C$. The tensile strength of base metal (JLF-1) showed the level between those of weld metal and the Heat Affected Zone (HAZ). When the test temperature was increased from room temperature to high temperature ($400^{\circ}C$ and $600^{\circ}C$), both strength and ductility decreased or base metal, weld metal and the HAZ. The longitudinal specimens of base metal represented similar strength and ductility at room temperature and high temperature, compared to those of transverse specimens. Little anisotropy for the rolling direction was observed in the base metal of JLF-1 steel.

Solo spun 방적에서 섬유의 거동과 사의 물리적 성질(2) (The Fiber Behavior in Solo-spun Yarn Formation and the Physical Properties of Solo-spun Yarn(2))

  • 박수현;김승진
    • 한국염색가공학회지
    • /
    • 제13권6호
    • /
    • pp.428-434
    • /
    • 2001
  • This study surveys the fiber behavior in yam formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yams were compared with the properties of ring shun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed wish respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fibers migration is. The Solo-spun film structure has two groups. One is shorter than the others one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derided from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun troller.

  • PDF

Solo spun 방적에서 섬유의 거동과 사의 물리적 성질(2) (The Fiber Behavior in Solo-spun Yarn Formation and the Physical Properties of Solo-spun Yarn(2))

  • 박수현;김승진
    • 한국염색가공학회지
    • /
    • 제13권6호
    • /
    • pp.70-70
    • /
    • 2001
  • This study surveys the fiber behavior in yarn formation and the Physical properties of Solo-spun yarn. The specimens were made by six types of Solo-spun rollers with fixed twist multiplier In the previous part, the physical properties such as yarn count, evenness, strength, and breaking elongation of these yarns were compared with the properties of ring spun yarns and analysed with the mechanism of Solo-spun yarn formation. In the second part of this report, the abrasion resistance and hairiness were discussed with respect to the micro yarn structures. The narrower the groove width of Solo-spun roller is, the more active the bulk fiber migration is. The Solo-spun yarn structure has two groups. One is shorter than the other one in longitudinal direction of yarn and has the same structure as ring-spun yarn, which is derived from the smooth zone on the surface of Solo-spun roller. The other one is longer than the former and there are the wrapping fibers. This part is derived from the conflicted grooves on the surface of Solo-spun roller.