• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.1-6
• /
• 1996

This study was performed to investigate the feasibility of using sonic stress-wave technique in the longitudinal direction for the assessment of incipient decay of radiata pine wood. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested nondestructively using stress-wave technique in the longitudinal direction and destructively. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, stress-wave elasticity) measured by stress-wave technique in the longitudinal direction and their percent reduction due to decay.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.397-405
• /
• 2022

The existing researches on the dynamics of the fluid-conveying pipes only focus on stability and vibration problems, and there is no literature report on the wave propagation of the fluid-conveying pipes. Therefore, the purpose of this paper is to explore the propagation characteristics of longitudinal and flexural waves in the fluid-conveying pipes. First, it is assumed that the material properties of the fluid-conveying pipes vary based on a power function of the thickness. In addition, it is assumed that the material properties of both the fluid and the pipes are closely depended on temperature. Using the Euler-Bernoulli beam equation and based on the linear theory, the motion equations considering the thermal-mechanical-fluid coupling is derived. Then, the exact expressions of phase velocity and group velocity of longitudinal waves and bending waves in the fluid-conveying pipes are obtained by using the eigenvalue method. In addition, we also studied the free vibration frequency characteristics of the fluid-conveying pipes. In the numerical analysis, we successively studied the influence of temperature, functional gradient index and liquid velocity on the wave propagation and vibration problems. It is found that the temperature and functional gradient exponent decrease the phase and group velocities, on the contrary, the liquid flow velocity increases the phase and group velocities. However, for vibration problems, temperature, functional gradient exponent parameter, and fluid velocity all reduce the natural frequency.

• 비파괴검사학회지
• /
• 제23권2호
• /
• pp.98-106
• /
• 2003

비파괴시험(NDT)은 구조물의 기능에 손상을 주지 않으면서 콘크리트에 대한 많은 정보를 준다. 여러 가지 NDT 방법들 중에서, 초음파 속도법과 충격반향기법과 같이 탄성파의 속도를 이용하는 방법은 콘크리트의 압축강도, 탄성계수, 포아송비의 추정뿐만 아니라, 내부 미세구조 변화 모니터링과 결함 탐지 등을 위해 이용되고 있다. 본 연구에서는 물-결합재비가 $0.27{\sim}0.50$이고 시멘트 중량의 20%를 플라이 애쉬로 대체 사용한 콘크리트를 제조한 후, 동일한 콘크리트에 대해 초음파 속도법과 충격반향기법을 이용하여 종파 속도를 각각 측정하여 서로 비교하였다. 실험 결과, 콘크리트 공시체로부터 측정된 초음파 속도가 충격반향기법에 의해 측정된 종파 속도, 즉 막대파 속도보다 큰 경향을 나타내었으며, 이들의 차이는 재령이 증가함에 따라 그리고 콘크리트의 강도가 커질수록 각각 감소하는 경향을 나타내었다. 또한, 동포아송비, 정탄성계수, 동탄성계수, 속도-강도의 상관관계 등을 실험적으로 결정하였다. 그 결과, 동적인 방법으로 결정되는 포아송비와 탄성계수가 정적인 시험에 의한 것보다 크게 나타났다. 따라서, 탄성파 속도를 이용하여 콘크리트의 성질들을 보다 정확하게 추정하기 위해서는 속도 특성에 대한 이해가 필요할 것으로 사료된다.

• 비파괴검사학회지
• /
• 제20권4호
• /
• pp.269-275
• /
• 2000

동결-융해 피로로부터 발생되는 손상이 콘크리트의 열화 및 붕괴를 초래하는 중대한 문제가 된다는 것은 이미 널리 알려져 있다. 일반적으로 동결-융해 피로가 지속되면 콘크리트의 미시조직에 내부응력과 크랙을 유발시킨다. 본 연구에서는 콘크리트에서의 동결-응해 손상을 평가하기 위해 종파와 표면파속도를 동시에 측정하는 one-sided 응력파 속도측정기법이라는 새로운 기법을 사용하였다. 상업용 시험장치를 이용하여 ASTM C666에 따라 제작된 $400{\times}350{\times}100mm$ 크기의 콘크리트 시편에 동결-융해 손상을 발생시켰다. 1사이클은 온도변화를 -14에서 $4^{\circ}C$로 하였고, $4{\sim}5$시간이 소요되었다. 매 5사이클마다 one-sided 응력파 속도측정기법에 기초하여 종파 및 표면파속도를 측정하였다. 동결-융해 손상이 증가함에 따라 종파 및 표면파속도의 변화가 있었고 이것은 동결-등채 피로 손상과정을 보다 유효하게 나타낸다는 것을 입증하였다. 또한 one-sided 기법에 의해 측정된 종파속도의 변화를 투과법을 이용하여 측정된 결과와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.103-106
• /
• 2000

Nondestructive tests are useful method in rapidly evaluating the condition of existing concrete structures. An objective of this work is to investigate the factors influencing the longitudinal wave velocity-strength relationship, such as w/c ratio, curing temperature, curing condition. Test results show that a change in the w/c ratio ranging from 0.46 to 0.88 and in the curing temperature from 1$0^{\circ}C$ to 3$0^{\circ}C$ did not alter the velocity-strength relationship. however, curing methods had significant effects on the velocity-strength relationship. Therefore, the estimation of compressive strength until 28 day can be accomplished by only a nonlinear equation with consideration of curing condition.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.69-79
• /
• 1996

Dynamic stress intensity factors are derives when the crack is propagating with constant velocity under longitudinal shear stress in orthotropic disk plate. General stress fields of crack tip propagating with constant velocity and least square method are used to obtain the dynamic stress intensity factor. The dynamic stress intensity factors of GLV/GTV=1(=isotropic material or transversely isotropic material) which is obtained in out study nearly coincides with Chiang's results when mode Ⅲ stress is applied to boundary of isotropic disk. The D.S.I.F. of mode Ⅲ stress is greater when α(=angle of crack propagation direction with fiber direction) is 90° than that when α is 0°. In case of a/D(a:crack length, D:disk diameter)<0. 58, the faster crack propagation velocity, the less D.S.I.F. but when crack propagation velocity arrive on ghear stress wave velocity, the D.S.I.F. but when crack propagation velocity arrive on shear stress wave velocity, the D.S.I.F. unexpectedly increases and decreases to zero.

• 대한토목학회논문집
• /
• 제32권5A호
• /
• pp.289-297
• /
• 2012

본 연구는 부착식 PSC 텐던의 응력파 속도를 계측하여 텐던에 도입된 긴장응력을 추정 할 수 있는 실험식을 제안한다. 실용적 실험식의 도출을 위하여 도입 긴장력이 다른 다수의 PSC시험체가 제작되었으며, 다양한 조건에서 종진동 실험이 반복 수행되었다. 도입 응력과 응력파 속도 사이의 관계에 영향을 미칠 수 있는 온도, 길이 및 텐던의 개수 등이 영향인자로 고려되었으며, 상사의 법칙을 적용하여 무차원 실험식이 도출 되었다. 제안 기법의 현장 적용성 검증은 실제 발전소 격납건물에 설치된 수직텐던에 대하여 수행되었다. 제안식을 이용하여 추정된 긴장응력은 텐던의 설계응력과 유사하다.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.