• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.128-136
• /
• 2015

River areas include channels, floodplains and all the areas affected by physical and ecological processes in river systems. It is noticeably different from present riparian zone which is bounded by dykes. In this study, two methods for delineation of a floodplain are proposed, which are used for evaluation of the function of a river. One of them is a geomorphology-based technique and the other is hydrology-based inundation analysis. For the Mankyung River, these two methods are applied to delineate the floodplain area. Areas delineated with both methods are mutually compared. The results show that the geomorphology-based method is suitable for the delineation of a valley bottom, including the floodplain in a broader sense, which is unlike an inundated area reflecting contemporary hydrologic conditions. Compared with other flood frequency areas, a 100-year flood inundation area was found reasonable to represent the spatial extent of a floodplain without regard to the longitudinal location along a river. However, it is necessary in certain rivers reach where the division of a channel exists to compare a geomorphological analysis on a valley bottom with an inundation area of different frequencies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.297-301
• /
• 2006

There are more than thirty continuously recording GPS stations (CORS) have been set up at different geological sites and distributed throughout a 140 km by 140 km area in southern Taiwan beginning since 2000, and the amount of the CORS are still under increasing in this area which is recognized the suture zone between the Philippe sea plate and Eurasia plate. From the year 2000 to the end of 2005, we analyze the daily solutions to obtain the average station velocities before and after the Chengkung earthquake which occurred near eastern Taiwan at 04:38 UTC on 10 December 2003. After considering the effects of the coseismic and postseismic displacements, the difference of the horizontal components reaches 13 mm/year of the average station velocity happened in the east side of the Central Range. To the vertical component, all of the stations are risen which located in the Coastal Range, and the largest difference approaches 20mm/year.

• Journal of Korean Society on Water Environment
• /
• v.34 no.5
• /
• pp.447-461
• /
• 2018

To realize river restoration that ecological characteristics of the river are reflected, we classified the river into four reaches of valley stream, upstream, midstream, and downstream based on substrate as well as riverbed gradient obtained from the relationship between distance from the river mouth, and above sea level. Considering that the rivers of Korea have been dominated by various and intense artificial interferences over a lengthy period, we determined cross sectional range of the river based on the geological map and clarified transformation degree by reach. Vegetation profile diagram was prepared by depicting horizontal range and vertical stratification of major vegetation appearing in a belt transect of 10 m breadth installed between weirs constructed in both sides of the river. Restoration models by river reach were prepared based on breadth of waterway, bare ground, herb, shrub, and tree dominated vegetation zones on vegetation profiles wherein a flooding regime was reflected. Species composition information collected from vegetation established in each zone was systematized to use for restoring each reach ecologically. Further, background that longitudinal reaches and horizontal zones were divided, was discussed by comparing with case studies in foreign countries. In addition, necessity of ecological restoration of the river was discussed based on degree of integrity of Korean rivers, ecological significance of riparian vegetation, and importance of reference information for ecological restoration of the river.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.83-99
• /
• 1994

Ch'ang-Ts'al-Ts'un is a rural Village near Lung-jing City in Yen-pien Korean Autonomous Province of China. It was formed about 100 years ago by Korean Immigrants and has been developed maintaing the characteristics of traditional Korean architecture. Therefore investigating the spatial structure of this village is a meanigful work to confirm and explore one branch of Korean architecture. This study aims at analyzing the spatial structure of the village using direct data collected from the field work and indirect data from books and maps. The field work consists of on-the-site survey of the village layout, interviews of residents, observation notes and photography. Ch'ang-Ts'ai-Ts'un is located 360-370 m high above the sea level and at the side of a long valley. A river flows in the middle of the valley and relatively flat arable land exists at the both sides of the river. The location of the village related to the surrounding river and mountains suggests that the site of the village was chosen according to Feng-Shui, Chinese and Korean traditional architectural theory. The main direction of the house layouts is South-western. The village has been growing gradually until today. Therefore it is meaningful to make the village layout before Liberation(1946 A.D.) because the characteristics of Korean architecture prevailed more in that period. The area of the previous village is limited to the west side of the creek. New houses were later added to the east of the creek, forming a 'New Village'. Previously the village was composed of 3 small villages: Up, Middle and Down. Also the main access roads connecting the village with the neighboring villages were penetrating the village transversely. Presently the main access road comes to the village longitudinally from the main highway located in front of the village. The retrospective layout shows the existence of well-formed Territory, Places and Axes, thus suggesting a coherent Micro-cosmos. The boundary of imaginery territory perceived by present residents could be defined by linking conspicous outside places sorrounding the village such as Five-mountains, Front-mountain, Shin-dong village, Standing-rock, Rear-mountain and Myong-dong village. Inside the territory there are also the important places such as Bus-stop, Memorial tower of patriots, Road-maitenance building and the village itself. And inside it 5 transverse and 1 longitudinal axes exist in the form of river, roads and mountains. The perceived spatial structure of the village formed by Places, Axes and Territory is geometrical and well-balanced and suggests this village is fit for human settlement. The administrative area of the village is about 738 ha, 27 % of which is cultivated land and the rest is mountain area. Initially the village and surrounndings were covered with natural forest But the trees have been gradually cut down for building and warning houses, resulting in the present barren and artificial landscape with bare mountains and cultivated land. At present the area of the village occupied by houses is wedge-shaped, 600 m wide and 220 m deep in its maximum. The total area of the village is $122,175m^{2}$. The area and the rate of each sub-division arc as follow. 116 house-lots $91,465m^{2}$ (74.9 %) Land for public buildings and shops $2,980m^{2}$ (2.4 %) Roads $17,106m^{2}$ (14.0 %) Creek $1,356m^{2}$ (1.1 %) Vacant spaces and others $9,268m^{2}$ (7.6 %) TOTAL $122,175m^{2}$ (100.0 %) Each lot is fenced around with vertical wooden pannels 1.5-1.8 m high and each house is located to the backside of the lot. The open space of a lot is sub-divided into three areas using the same wooden fence: Front yard, Back yard and Access area. Front and back yards are generally used for crop-cultivation, the custom of which is rare in Korea. The number of lots is 116 and the average size of area is $694.7m^{2}$. Outdoor spaces in the village such as roads, vacant spaces, front yard of the cultural hall, front yard of shops and spacse around the creek are good 'behavioral settings' frequently used by residents for play, chatting, drinking and movie-watching. The road system of the village is net-shaped, having T-junctions in intersections. The road could be graded to 4 categories according to their functions: Access roads, Inner trunk roads, Connecting roads and Culs-de-sac. The total length of the road inside the village is 3,709 m and the average width is 4.6 m. The main direction of the road in the village is NNE-SSE and ESE-WNW, crossing with right angles. Conclusively, the spatial structure of Ch'ang-Ts'ai-Ts'un village consists of various components in different dimensions and these components form a coherent structure in each dimension. Therefore the village has a proper spatial structure meaningful and appropriate for human living.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.622-629
• /
• 2021

This study analyzed the running speed of logging trucks (25 tons), depending on the structural state of forest roads, on four main forest roads in the national forest management offices in Chuncheon and Hongcheon for trafficability. The speeds for the curved and straight sections were 7.6 km/h and 8.7 km/h, respectively, which were less than the designed speed (20 km/h). Thus, it would be necessary to improve the forest road's structure to fulfill minimum running speed. No significant difference was observed in the running speed by the longitudinal gradient up to 13%, while it was increased at more than 100 m by the distance in the straight section. By the facility's location in the curved section, the running speed was 6.2%-9.3% lower in a ridge than a valley. The running speed was lowest at the internal angles of <90° and at the curved radius of <15 m, respectively. When this radius was less than 15 m, the substandard sections for widening amounts were more than 50%; thus, sufficient widening was not achieved.