• 한국경영과학회지
• /
• 제26권1호
• /
• pp.109-116
• /
• 2001

The detection of corporate failures is a subject that has been particularly amenable to cross-sectional financial ratio analysis. In most of firms, however, the financial data are available over past years. Because of this, a model utilizing these longitudinal data could provide useful information on the prediction of bankruptcy. To correctly reflect the longitudinal and firm-specific data, the generalized linear model with assuming the first order AR(autoregressive) process is proposed. The method is motivated by the clinical research that several characteristics are measured repeatedly from individual over the time. The model is compared with several other predictive models to evaluate the performance. By using the financial data from manufacturing corporations in the Korea Stock Exchange (KSE) list, we will discuss some experiences learned from the procedure of sampling scheme, variable transformation, imputation, variable selection, and model evaluation. Finally, implications of the model with repeated measurement and future direction of research will be discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.102-107
• /
• 2013

It is important to understand the vibrating behavior of plate structures for many engineering applications. In this study, vibration characteristics of strip plates which have finite width and infinite length are investigated theoretically and numerically. The waveguide finite element approach is used in this study which is known as an effect tool for waveguide structures. WFE method requires only cross-sectional FE model and uses theoretical harmonic solutions for the wave propagation along the longitudinal direction. First of all for a simple strip plate, WFE results are compared with theoretical ones such as the dispersion diagrams, point mobilities, etc. to validate the numerical model. Then in the numerical analysis, the several different types of longitudinal stiffeners are included to the plate model to investigate the effects of the stiffeners in terms of the dispersion curves and mobilities.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.263-265
• /
• 2003

The transverse crack, a type of cold crack, occurs perpendicular to the axis of the weld interface, longitudinal residual stresses ($\sigma$k direction) are more important in transverse crack occurrence from my own experience. Specimens were fabricated and welded under actual construction conditions, and then residual stresses of longitudinal stresses were measured for different welding conditions with SAW and FCAW process. The residual stress values for the specimen welded Interpass temperature below 30$^{\circ}C$ was higher than the specimen welded interpass temperature of 100～120$^{\circ}C$. And also the residual stress values for a specimen measured at weld surface, as welded condition, was higher than that of longitudinal residual stresses that was measured from a small test piece, due to the residual stress was relieved in the process of the cutting and machining. Transverse weld cracks were detected in the area of the maximum residual stresses both SAW and FCAW process.

• 한국방재학회 논문집
• /
• 제3권4호
• /
• pp.103-109
• /
• 2003

사장교 설계에서 최적의 지지조건을 결정하기 위해 사장교 전체구조계의 교축방향에 대해서 주형의 지지조건에 따른 활하중, 풍하중과 지진하중에 의한 주형, 주탑단면력 및 케이블력의 변화를 3차원 수치해석을 통해 검토하였다. 교축방향의 적합한 경계조건 도입은 주형의 지지점과 주탑의 기초부의 반력뿐만 아니라 주형의 휨모멘트에서 많은 변화를 유도할 수 있다. 본 수치해석의 예에서, 종방향 탄성계수값은 활하중이 작용 할 경우는 약 100tonf/m/bearing, 지진하중이 작용 할 경우는 약 100tonf/m/bearing 에서 최적의 지지조건임을 알 수 있다. 즉 본 해석대상 교량에서 종방향 탄성계수값이 $100{\sim}1000tonf/m/bearing$ 일 경우의 지지조건에서 최적의 지지조건을 얻었으며, 이 조건에서 주탑의 단면력을 합리적으로 결정할 수 있음을 알 수 있다.

• Human Ecology Research
• /
• 제58권2호
• /
• pp.163-176
• /
• 2020

Longitudinal studies have shown mixed findings on the association between body image dissatisfaction and self-esteem among adolescents. This study examined the longitudinal, reciprocal influences between body image dissatisfaction and self-esteem among Korean pre- and early adolescents by using nationally representative longitudinal panel data from the Korean Youth Panel Study (KYPS). Analyses based on 2,230 participants indicated that girls' body image dissatisfaction was significantly higher than boys'. The trajectory of body image dissatisfaction increased sharply during pre- and early adolescence, but stabilized afterwards for both boys and girls. Self-esteem deteriorated rapidly initially, but began to recover as adolescent girls and boys matured. Structural equation modeling showed that reciprocal influences between body image dissatisfaction and self-esteem were detected for boys. Body image dissatisfaction among girls predicted self-esteem during the entire period, while the opposite direction from self-esteem to body image dissatisfaction emerged two years later. The present study found that, during pre- and early adolescence, body image dissatisfaction and self-esteem develop in a circular fashion by forming a vicious cycle. Implications for the development of intervention and prevention programs are discussed in consideration of age and gender.

• Steel and Composite Structures
• /
• 제16권5호
• /
• pp.455-480
• /
• 2014

Sixteen concrete filled square CFRP-steel tubular (S-CFRP-CFST) stub columns under axial compression were experimentally investigated. The experimental results showed that the failure mode of the specimens is strength loss of the materials, and the confined concrete has good plasticity due to confinement of the CFRP-steel composite tube. The steel tube and CFRP can work concurrently. The load versus longitudinal strain curves of the specimens can be divided into 3 stages, i.e., elastic stage, elasto-plastic stage and softening stage. Analysis based on finite element method showed that the longitudinal stress of the steel tube keeps almost constant along axial direction, and the transverse stress at the corner of the concrete is the maximum. The confinement effect of the outer tube to the concrete is mainly focused on the corner. The confinements along the side of the cross-section and the height of the specimen are both non-uniform. The adhesive strength has little effect both on the load versus longitudinal strain curves and on the confinement force versus longitudinal strain curves. With the increasing of the initial stress in the steel tube, the load carrying capacity, the stiffness and the peak value of the average confinement force are all reduced. Equation for calculating the load carrying capacity of the composite stub columns is presented, and the estimated results agree well with the experimental results.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.357-372
• /
• 2001

In this paper, cantilevered tall structures are treated as cantilever bars with varying cross-section for the analysis of their free longitudinal (or axial) vibrations. Using appropriate transformations, exact analytical solutions to determine the longitudinal natural frequencies and mode shapes for a one step non-uniform bar are derived by selecting suitable expressions, such as exponential functions, for the distributions of mass and axial stiffness. The frequency equation of a multi-step bar is established using the approach that combines the transfer matrix procedure or the recurrence formula and the closed-form solutions of one step bars, leading to a single frequency equation for any number of steps. The Ritz method is also applied to determine the natural frequencies and mode shapes in the vertical direction for cantilevered tall structures with variably distributed stiffness and mass. The formulae proposed in this paper are simple and convenient for engineering applications. Numerical example shows that the fundamental longitudinal natural frequency and mode shape of a 27-storey building determined by the proposed methods are in good agreement with the corresponding measured data. It is also shown that the selected expressions are suitable for describing the distributions of axial stiffness and mass of typical tall buildings.

• 한국결정학회지
• /
• 제2권1호
• /
• pp.1-11
• /
• 1991

GaAs 단결정을 LEC법으로 성장시킬 때 종단쌍정이 자주 발생하여 문제가 된다. 종단쌍정이 발생 하면 (100) 방향의 성장축이 (221)로 바뀐다. 본 실 험에서는 (100) 방향의 성장축으로 직경 3 inch의 CaAs 단결정을 LEC법에 의해 성장시키고, SPW photo-etching법에 의해 GaAs 단결정성장에서 생성 된 striation과 edge facet를 관찰하여 상호관계를 연 구하였다. 이들의 불안정한 생성이 종단방정 발생의 원 인 이었다. Striation의 형태는 결정직경, 융액량등의 성장조건에 따라 변화하였다. 결정주변부에서는 미시적인 striation 형태의 변화가 있었는데, 이는 용액대류의 불안정에 기인한 것이었다. {lll} 면으로 구성된 edge facet은 결정주변부에서 striation의 형태가 볼록 해질 때 잘 생성되었다. 이것은 striation과 {lll} edgp facet이 이루는 각도가 작아지기 때문이었다. 종단방정은 결정축에 수직한 (110) 방향의 결정 표면에서 발생하였다. 이들은 불안정한 융액대류에 의해 생성되어 결정이 성장함에 따라 결정속으로 전파되었다. 종단방정은 {lll} edge facet의 재용융 후 재성장의 성장속도가 매우 빠를 때 발생하였다. 따라서 이러한 종단쌍정의 발생을 억제하기 위해서 는 고액계면에서의 급격한 융액대류의 변화가 생기 지 않도록 하여야 한다.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.363-368
• /
• 2004

In the present study, the focus is on the analysis of the effect of the mold dimensions on the temperature distribution of a die during plasma activated sintering. The temperature distribution of a cylindrical mold with various dimensions was measured using K-type thermocouples. The temperature homogeneity of the die was studied based on the direction and dimensions of the die. A temperature gradient existed in the radial direction of the die during the plasma activated sintering. Also, the magnitude of the temperature gradient was increased with increasing sintering temperature. In the longitudinal direction, however, there was no temperature gradient. The temperature gradient of the die in the radial direction strongly depended on a ratio of die volume to punch area.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.15-21
• /
• 2011

The safety at this study is investigated by flow or stress analyses due to configuration or installation direction of fuel tank in the existing CNG bus. In case of the lower ceiling with sharp type, the equivalent stress due to the explosion of fuel tank is less than the type of flat or arc. it becomes safer on passenger. In case of the installation direction of fuel tank in the existing CNG bus, the stress applied on the lower ceiling at transverse direction becomes less than at longitudinal direction. It is more stable on the safety of passenger. The harm on the explosion accident can be prevented by use of the analysis result at this study.