• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.816-825
• /
• 2002

During the manufacture of a ship, longitudinal deformation is produced by fillet welding on the BuiltUp beam used to improve the longitudinal strength of a ship. This deformation needs a correcting process separate from a manufacture process and decreases productivity and quality. This deformation is caused by welding moment, which is the value multiplied the shrinking force due to welding by the distance from the neutral axis on a cross section of Built-Up beam. This deformation can be offset by generating a moment which is the same magnitude with and is located in an opposite direction to the welding moment on web plate by induction heating. Accordingly, this study clarifies the creation mechanism of the longitudinal deformation on Built-Up beam with FEM analysis and presents the preventative method of this deformation by induction heating basing the mechanism and verifies its validity through analysis and experiments. The induction heating used here is performed by deciding its location and quantity with experiments and simple equations and by applying them to areal structure.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.32-37
• /
• 2010

This study presents the attenuation characteristics of the first guided longitudinal wave mode propagating in water-filled, buried steel pipes in order to investigate the effects of soil saturation and compaction on the attenuation patterns. For numerical calculation of attenuation, 10 different combinations of S-wave velocity, P-wave velocity, and soil densities were considered. From the attenuation dispersion curves, which were obtained using Disperse software, we determined that the attenuation decreases as saturation increases, whereas it increases as compaction increases. Over the frequency range from 0.2 to 0.4 MHz, the first longitudinal wave mode has attenuations that are relatively lower than for other ranges, is faster than the first flexural wave mode, and is sensitive to defects aligned in the axial direction. Hence, the first longitudinal wave mode over the mentioned frequency range would be the proper choice for long-range buried pipelines that transport water.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.103-107
• /
• 1995

Longitudinal hull girder vibration has not been occurred severely since 1960's. However, recent low speed diesel driven ships equipped with overcritical shafting system, can be excited heavily in longitudinal direction by shaft axial farce coupled with torsional vibration. In this study the characteristics of longitudinal hull girder vibration of a 73,000 deadweight bulk carrier were investigated through onboard measurement, exciter test, and 3-D FEM analysis. Results showed that the longitudinal hullgirder vibration may occur in the ship which is not set up the barred speed range in engine operation. Moreover, this vibration occurs. only during the low speed voyage in harbour depending upon the ship loading condition.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.22-31
• /
• 1996

Air permeabilities for both sapwood and heartwood of the three softwoods(Picea jezoensis, Larix gmelini, Pinus sylvestris), imported from the Russian Far East, in the three different structural directions were measured using steady-state rotameter method. After measuring permeability, the liquid absorption into the longitudinal permeability specimens was measured, and then related with the measured permeability. The longitudinal permeability was overwhelmingly greater than the transverse permeability, with the radial direction showing higher permeability than the tangential direction. There appear to be species differences in permeability of the three softwoods. The mean longitudinal sapwood permeability of P. jezoensis(3.300darcy) and P. sylvestris(3.028darcy) were considerably greater(ca. 25times) than that of L. gmelini(0.134darcy). Also the average longitudinal heartwood permeability of P. jezoensis(0.300darcy) was about 10 times as great as that of P. sylvestris(0.029darcy) and L. gmelini(0.024darcy). The average calculated radius of pit openings in the heartwood was $0.101{\mu}m$ for L. gmelini, $0.152{\mu}m$ for P. sylvestris for and $0.703{\mu}m$ for P. jezoensis. Heartwood permeability increases with the increase in radius of pit pore and the decrease in ring width and in extractive content, even though the correlation between permeability and its affecting factors was dependent on species. However, there was an inverse relationship between specific gravity and permeability, showing poor correlation between them. The correlation between air permeability and liquid retention was fairly high, so it was revealed that prediction of liquid absorption into the wood by using permeability was feasible.

• Journal of Gifted/Talented Education
• /
• v.23 no.5
• /
• pp.793-815
• /
• 2013

Research on entrepreneurial gifted youth who have immense potential within the national economy in the near future is critical. The purpose of this article is to establish the proper goal and direction of longitudinal study on entrepreneurial gifted youth and to identify substantial research problems. In order to do a theoretical inspection around preceeding research related with the field, longitudinal study of entrepreneurial youth (including gifted education and entrepreneurship) was executed. As a result, the goal, 'the verification of whether entrepreneurs can be cultivated by educational interventions' was derived as an appropriate research direction. Also, 4 major research problems are presented: (1) Description of the features of entrepreneurial gifted youth and their developmental pattern, (2) Explanation of the effects of educational intervention on intensifying entrepreneurial giftedness, (3) Prediction which identifies the factors that influence the youths' success as eminent entrepreneurs, and (4) Control over promoting talented individuals and refining relevant policy and institutions. Implications and further research directions are also discussed.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.546-551
• /
• 2010

In this paper, the strain distribution of the bond layer has been compared with the experimental data and analyzed according to the different mesh refinements and element types. The mesh density was changed along the longitudinal direction of adherend, the longitudinal direction of overlapped region, the vertical direction of adherend, the vertical direction of adhesive and the width direction of the joint. In addition, the effect of the different types of element was evaluated using soild, shell and plane strain element. The geometric nonlinear analysis was performed to consider the large deformation of the joint. From the numerical result, at least 2 elements were needed to achieve a reliable result as the solid element used. In case of shell element, the peel strain at x/c=1 showed 22.8% error compared with the experiment but the shear strain showed a good agreement with the experiment within 1.67% error.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.44-46
• /
• 1996

Superconducting cable is using by bundling and twisting with many strands for large current capacity. As a result of the twisting, the magnetic field whose direction is parallel to a sound axis by the transport current of themselves is produced in the cable. Not only the externally exposed longitudinal field but also longitudinal component of self field make a influence on a.c loss and a.c quench current degradation. In this paper, we calculate the saturated region flowing with the critical current density in a strand in case of various twist pitch, transport current and external longitudinal field.

• Journal of the Korea Furniture Society
• /
• v.19 no.2
• /
• pp.111-115
• /
• 2008

An experiment was conducted to know ultra-pure distilled water penetration depth through large vessel, small vessel, latewood fiber and earlywood fiber in longitudinal direction of Castanea crenata. In heartwood, latewood fiber transported water more than large and small vessel. While in sapwood, small vessel conduction depth was found the highest. Penetration depth of water after 15.0 seconds, no significant difference was observed among earlywood fiber, latewood fiber and earlywood vessel. Whilst in heartwood, no statistical difference was observed among earlywood fiber, latewood fiber and earlywood vessel. At the beginning, the speed of water penetration was high and then gradually decreased.

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.100-105
• /
• 2007

In this report, we describe the anatomical features of Gmelina arborea Roxb. belong to the genera of Verbenaceae native to Bangladesh and safranine penetration depth in radial and longitudinal directions. The wood of this species was characterized mostly by distinct growth ring boundaries, diffuse-porous, simple perforations, alternate non-vestured intervessel pits, and relatively short vessel elements and medium fibers. Thin to thick walled septate fibers with simple to minutely bordered pits are confined to the radial walls. Tyloses are common. They are paratracheal axial parenchyma vascicnetric and confluent. Rays not higher than 1milimeter are found, and larger rays commonly 4 to 5 seriate are dominantly present, as are multi seriate rays composed of a procumbent ray with 1 row of square or upright cells. Acicular crystals are present in ray cells. Another experiment was taken under consideration to observe the liquid penetration depth in longitudinal and radial directions using safranine. It was found that safranine penetrated easily in longitudinal direction and sapwood was more permeable than heartwood.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.1
• /
• pp.109-116
• /
• 2001

The detection of corporate failures is a subject that has been particularly amenable to cross-sectional financial ratio analysis. In most of firms, however, the financial data are available over past years. Because of this, a model utilizing these longitudinal data could provide useful information on the prediction of bankruptcy. To correctly reflect the longitudinal and firm-specific data, the generalized linear model with assuming the first order AR(autoregressive) process is proposed. The method is motivated by the clinical research that several characteristics are measured repeatedly from individual over the time. The model is compared with several other predictive models to evaluate the performance. By using the financial data from manufacturing corporations in the Korea Stock Exchange (KSE) list, we will discuss some experiences learned from the procedure of sampling scheme, variable transformation, imputation, variable selection, and model evaluation. Finally, implications of the model with repeated measurement and future direction of research will be discussed.