• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.397-404
• /
• 2023

This paper designs a wind turbine test site based on international regulations for the certification of wind turbine prototypes. The maximum height of the meteorological mast installed at the test site is 140m, and power facilities capable of testing up to three wind turbines of 5MW or more are installed. The weather resources measured at the mast can be recorded and analyzed using a monitoring system. Wind turbine manufacturers can use this test site during the certification period, and the installed wind turbines can be used for continuous power generation projects. Therefore, this test site can provide fundamental data for measuring the long-term performance and durability of wind turbines, which can be used to improve models or develop new wind turbines.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2022

Objectives: For the deviation phenomenon occurring during the treatment process in temporo-mandibular balancing medicine (TBM), hypotheses were established regarding the cause and mechanism of formation from the perspective of neuro-science and material mechanics, and a verification method was proposed. Methods: The deviation phenomenon was theoretically analyzed based on the structure theories of material mechanics of the joint and the neurological pain mechanism. Results: Deviation occurs due to temporary yield by the accumulation of heterogeneous stress in the temporo-mandibular joint and the affected joint. Because the joint structures are corresponding with material mechanics showing compressive and tensile properties. The size of the deviation is expressed in terms of strain. The occlusal surface of the teeth is level with the axial joint. Since the magnitude of the deviation has a proportional relationship with the degree of abnormality of the temporo-mandibular joint, the magnitude of the deviation calculated by the balance measurement can be replaced by the strain. The major variables involved in the occurrence of deviations are the strength of joint structures and neurological conditions. Therefore plastic deformation and adaptation occur as a long-term depression of neural circuits is strengthened in different ways at different locations each time in various clinical situations. This is the reason why the sequence of the restoration process while correcting deviations is following reverse order of the accumulation in many layers in the muscular nervous system. Conclusions: From the above results, it can be inferred that the occurrence and correction of the deviations are corresponding with the plastic deformation and neuro-plasticity.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.29-37
• /
• 2024

This study investigates the thermal conductivity and density of expanded polystyrene insulation materials collected from buildings under going energy retrofit projects. Due to the absence of initial thermal conductivity data, determining precise long-term patterns was challenging. Analysis based on design documents revealed that expanded polystyrene insulation maintained consistent performance over ten years. Notably, the thermal conductivity measurements of insulation samples of the same grade and age varied significantly. Additionally, the insulation density was found to be substantially below the standard specified in the design documents. The results of the experiment indicate that performance management during both construction and operation phases is lacking. It is crucial to apply building commissioning, which involves performance verification throughout the building's life cycle, to properly evaluate building energy performance improvements, such as building energy retrofit projects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.273-283
• /
• 2020

Because of climate change, the occurrence of localized and heavy rainfall is increasing. It is important to predict floods in urban areas that have suffered inundation in the past. For flood prediction, not only numerical analysis models but also machine learning-based models can be applied. The LSTM (Long Short-Term Memory) neural network used in this study is appropriate for sequence data, but it demands a lot of data. However, rainfall that causes flooding does not appear every year in a single urban basin, meaning it is difficult to collect enough data for deep learning. Therefore, in addition to the rainfall observed in the study area, the observed rainfall in another urban basin was applied in the predictive model. The LSTM neural network was used for predicting the total overflow, and the result of the SWMM (Storm Water Management Model) was applied as target data. The prediction of the inundation map was performed by using logistic regression; the independent variable was the total overflow and the dependent variable was the presence or absence of flooding in each grid. The dependent variable of logistic regression was collected through the simulation results of a two-dimensional flood model. The input data of the two-dimensional flood model were the overflow at each manhole calculated by the SWMM. According to the LSTM neural network parameters, the prediction results of total overflow were compared. Four predictive models were used in this study depending on the parameter of the LSTM. The average RMSE (Root Mean Square Error) for verification and testing was 1.4279 ㎥/s, 1.0079 ㎥/s for the four LSTM models. The minimum RMSE of the verification and testing was calculated as 1.1655 ㎥/s and 0.8797 ㎥/s. It was confirmed that the total overflow can be predicted similarly to the SWMM simulation results. The prediction of inundation extent was performed by linking the logistic regression with the results of the LSTM neural network, and the maximum area fitness was 97.33 % when more than 0.5 m depth was considered. The methodology presented in this study would be helpful in improving urban flood response based on deep learning methodology.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.377-401
• /
• 2011

Under the WTO system, direct export support system that provides financial and tax related support is altogether prohibited. This presented an obstacle in strengthening competitiveness of Korean export business and in increasing exports continuously. One of the methods used to solve this problem was to actively leverage export insurance. In Korea, export insurance services have been conducted by the Korea Trade Insurance Corporation (k-sure) to promote export. Korea has been among the world's active users of the export insurance system. Given this situation, this paper examines the effectiveness of the Korea export insurance system in the promotion of export. In particular, this study analyzed about discriminating effects of the export insurance on the export of big and small-medium business. In order to analyze, We introduce a Export Supply Function model. In this paper, We construct two model. The one is about big business, the other is small-medium business. For empirical analysis, unit-root test was conducted to understand the safety of time series. The results show that all variables are not I(0) time series. Instead, they are I(1) time series. To this, cointegration verification was conducted based on the use of Johansen verification method to define the existence (or non-existence) of long-term balance relationship among variables. The results come out as follows. The export insurance of big business has a stronger effect on export than that of small-medium business. The cause of these results is due to the distinct structure of Korea industries. In view of the fact that the insurance can make the risk decreased. We can say that the export insurance affects the export of a high-risk country.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2014

There is a big risk of bullet impact because military rotorcraft is run in the battle environment. Due to the bullet impact, the rapid increase of the internal pressure can cause the internal explosion or fire of fuel cell. It can be a deadly damage on the survivability of crews. Then, fuel cell of military rotorcraft should be designed taking into account the extreme situation. As the design factor of fuel cell, the internal fluid pressure, structural stress and bullet kinetic energy can be considered. The verification test by real object is the best way to obtain these design data. But, it is a big burden due to huge cost and long-term preparation efforts and the failure of verification test can result in serious delay of a entire development plan. Thus, at the early design stage, the various numerical simulations test is needed to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact numerical simulation based on SPH(smoothed particle hydrodynamic) is conducted with the commercial package, LS-DYNA. Then, the resulting equivalent stress, internal pressure and bullet's kinetic energy are evaluated in detail to examine the possibility to obtain the configuration design data of the fuel cell.

• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.165-177
• /
• 2006

Objectives : 1. Clinical trial for the efficacy evaluation of Korean acupuncture techniques in treating frozen shoulder. 2. Development of the standard clinical guidelines of the acupuncture treatment for the frozen shoulder. 3. Development of the new clinical protocol for the acupuncture treatments. 4. Verification of the hypothesis that treating at both the remote and the nearby acupoints according to the meridian theory is more effective than treating at only the nearby acupoints. Methods : 1. Research designed as Single blind, Randomized, Sham acupuncture controlled clinical Trial. 2. Assignment of 86 patients to one of three groups treated at nearby acupoints(group A), remote & nearby acupoints(group B), and sham points(group C) respectively. 3. Trial conducted at KIOM CRC of Dunsan oriental medical hospital, Daejeon Univ. 4. Estimation of the recovery rate of the frozen shoulder in subjects aged over 40. 5. Efficacy evaluation using VAS, SPADI, ROM and Improvement rate. Results : 1. There was no significant difference in VAS among the three groups. 2. Pain related scores in SPADI of the group B were significantly lower than those of the group A. 3. There was no significant difference in disability related scores of SPADI among the three groups. 4. External rotation of upper arm in the group B was significantly improved in comparison with that in the group C. 5. Abduction of upper arm in group A was improved with weak statistical significance in comparison with that in the group C. Conclusion : Acupuncture at both the remote and the nearby acupoints according to the meridian theory is effective to improve external rotation of frozen shoulder, and acupuncture at the nearby acupoints is effective to improve adduction of frozen shoulder. However it is not clear that acupuncture treatment at both the remote and the nearby acupoints according to the meridian theory is more effective than treating at only the nearby acupoints in the treatment of frozen shoulder. Since our study was a short term trial, a long term trial for a more precise evaluation of acupuncture treatment for frozen shoulder will be needed in the future.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.49-58
• /
• 2014

This study was implemented as a part of the experiment to develop two kinds of soil-based Benzo[a]pyrene (BaP) proficiency testing materials (PTMs) for soil analysis. A test was carried out for the check of solubility of the reference material (high purity reagent) using several solvents. Another test was also conducted for the evaluation of homogeneity and stability of two kinds of candidate soil reference materials. The test analysis of BaP in terms of the candidate materials was conducted according to the Standard Soil Analytical Methods by Ministry of Environment. Dissolution of the reference material was shown to vary depending on solvent type and was higher in the order of Dichloromethane > Acetone > Acetone/MeOH (9 : 1) > N-hexane. In addition, the slope on calibration curve for BaP standard solutions was largest on BaP standard solutions prepared with dichloromethane of the tested solvents. Such tendency appeared egually in the commercial BaP standard solution. Therefore, it is thought to be reasonable to use dichloromethane as the solvent in case of the standard stock solution that is used for the measurement of BaP concentration in soil. ISO 13528 and IUPAC protocol were used for verification of homogeneity on the two kinds of soil candidate materials, Both candidate materials were sufficiently homogeneous. Stability assessment of the two candidate materials was made according to ISO Guide 35 and the result showed that both batches did not have any long-term and short term stability issues that might occur during shipping. However, monitoring results of BaP concentration in soil showed that BaP concentration of the two batches measured at 15 days after the sample preparation was reduced by about 24~37% compared with that of the samples measured on 0 day of the sample preparation. Identification was done with several treatments such as irradiation and sterilization etc. The major cause was shown to be irradiation to the samples.

• Atmosphere
• /
• v.24 no.3
• /
• pp.283-301
• /
• 2014

In 2010, only 14 tropical cyclones (TCs) were generated over the western North Pacific (WNP), which was the smallest since 1951. This study summarizes characteristics of TCs generated in 2010 over the WNP and investigates the causes of the record-breaking TC genesis. A long-term variation of TC activity in the WNP and verification of official track forecast in 2010 are also examined. Monthly tropical sea surface temperature (SST) anomaly data reveal that El Ni$\tilde{n}$o/Southern Oscillation (ENSO) event in 2010 was shifted from El Ni$\tilde{n}$o to La Ni$\tilde{n}$a in June and the La Ni$\tilde{n}$a event was strong and continued to the end of the year. We found that these tropical environments leaded to unfavorable conditions for TC formation at main TC development area prior to May and at tropics east of $140^{\circ}E$ during summer mostly due to low SST, weak convection, and strong vertical wind shear in those areas. The similar ENSO event (in shifting time and La Ni$\tilde{n}$a intensity) also occurred in 1998, which was the second smallest TC genesis year (16 TCs) since 1951. The common point of the two years suggests that the ENSO episode shifting from El Ni$\tilde{n}$o to strong La Ni$\tilde{n}$a in summer leads to extremely low TC genesis during La Ni$\tilde{n}$a although more samples are needed for confidence. In 2010, three TCs, DIANMU (1004), KOMPASU (1007) and MALOU (1009), influenced the Korean Peninsula (KP) in spite of low total TC genesis. These TCs were all generated at high latitude above $20^{\circ}N$ and arrived over the KP in short time. Among them, KOMPASU (1007) brought the most serious damage to the KP due to strong wind. For 14 TCs in 2010, mean official track forecast error of the Korea Meteorological Administration (KMA) for 48 hours was 215 km, which was the highest among other foreign agencies although the errors are generally decreasing for last 10 years, suggesting that more efforts are needed to improve the forecast skill.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.201-211
• /
• 2017

The estuary in Nakdong River has changes by the construction of harbors, land reclamation and artificial waterway changes. These resultslead to changes of extinction and creation of deltaic barrier island. The deltaic barrier island changes in the Nakdong River estuary affect the function of the barrier islands and cause environmental changes. Therefore, it is important to monitor the changes in the area of the Nakdong estuary. In this study, long-term changes of the area and suspended sediment of deltaic barrier island in the Nakdong River estuary were analyzed using Landsat TM/ETM+ images. As a result, end point rate (EPR) values of shoreline in Jinwoodo and Sinjado are about 5m/yr and about 50 m/yr, respectively. The EPR values of north-south and east-west direction in Doyodeung are 20 m/yr and -20 ~ 10 m/yr. The suspended sediment concentration (SSC) has a maximum value of $25g/m^3$ in the vicinity of Jinwoodo and Sinjado, while it has a maximum concentration of $40g/m^3$ in the vicinity of Shinjido and Doyodeung. In other words, the area and the SSC change are small in Jinwoodo, and the area change and the SSC variation are large in Sinjado and Doyodeung. As a result of analysis of correlation between area change and SSC variation using all data, the Pearson coefficient value (r) is 0.36 and it is 0.32 in winter data. In other words, it is considered that the SSC variation affectsthe deltatic barrier island area change. However, verification using advanced altimetry data is necessary in the future. These studies can be used for coastal monitoring and environmental monitoring.