• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.131-133
• /
• 2000

Single phase simulations were carried out in order to determine a solutive conductor to the aeolian noise which will be locally applied to 765 kV transmission lines Basic solutive conductors have already been proposed including conductors equipped with spiral rod. low noise conductor of a special shape and others. A low aeolian noise conductor, however, should have excellent corona characteristics in addition to aeolian noise reduction function. In this paper, we compared the performances of the audible noises and radio interferences of 6 candidate conductor bundles by using corona cage. We also developed two programs to need for evaluating environmental effects of each conductor bundle. Those are a program to calculate the conductor surface gradient of various special bundles and a conversion program of single phase data to the model of transmission line. The future determination on the final low aeolian noise conductor will be made through a long-term test to verify environmental impacts at the full-scale Kochang 765 kV test line.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.345-353
• /
• 2008

In order to design storage-based non-point source management facilities, the aspect of statistical features of the entire precipitation time series should be considered since non-point source pollutions are delivered by continuous rainfall runoffs. The 3-parameter mixed exponential probability density function instead of traditional single-parameter exponential probability density function is applied to represent the probabilistic features of long-term precipitation time series and model urban stormwater runoff. Finally, probability density functions of water quality control basin overflow are derived under two extreme intial conditions. The 31-year continuous precipitation time series recorded in Busan are analyzed to show that the 3-parameter mixed exponential probability density function gives better resolution.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.208-215
• /
• 2016

Purpose: ASRP for the domestic development guided missiles requires not only for the reliability evaluation of the products in storage but also for the life cycle management of the products including development prototypes and initial production items. Methods: For this purpose, it should be performed to build a performance database before and after the accelerated aging test with shelf life items including development prototypes and initial production items, based on which the lifetime prediction should also be carried out. In addition, HILS must be applied for the acceptance test with the initial and follow-up production items, and also for ASRP for the long-term storage products in order to secure systematic quality assurance. Results: The results for the life cycle reliability Improving of domestic development of guided missiles are DB building of prescription Item performance, active application of HILS, Management associated with guided missiles life cycle and to Secure technology data about the introduction of foreign guided missiles. Conclusion: Furthermore, it is demanded that DTaQ, the managing agency of ASRP, actively take part in the process to maintain reliability engagement consistency over the life cycle of guided missiles.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.3-10
• /
• 2014

The synchronization signal in Long Term Evolution (LTE) systems contains the primary synchronization signal (PSS) and the secondary synchronization signal (SSS), and the overall synchronization performance is dominated by PSS detection. In this paper, we propose a PSS detection scheme employing three partial correlation based PSS detectors with different partial correlation lengths, in which calculated partial correlation values are reused in order to reduce computational complexity. A coherent selection scheme using tentative frequency offsets is also proposed to select one reliable result from outputs of partial correlation based PSS detectors. It is shown through computer simulation that the proposed scheme can have a robust detection performance in wide range of frequency offsets.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.327-331
• /
• 2008

In Korea, welfare needs brought on by the rapidly growing of elderly population. Also, the senior group with spare time, wealth and health is increasing. Currently, the people have known about needs welfare system for improving quality of life during senescence personally and socially. In addition to the senior friendly industry, having distinction with simple approach medical services, will be great expanding after 2010. And there will be a new welfare services plan supporting long term care insurance for senior citizens. But we don't have prepared systematically organized senior friendly industry and products yet. So, the purpose of the study is to analyze systematically the classification characteristics of the senior friendly products according to the difficulty of daily living for senior citizens. Above all, the study finds out the senior friendly products characteristics according to the consumer's various situations about health and housing space. Therefore the result of the study reveals that the simulation guidelines for choosing the products depend on the customer's needs are essential and useful to improve senior friendly industry. And the post evaluation data of senior friendly products would be put to practical use in the industry.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.118-126
• /
• 2008

The use of beamforming is effective for users in limited power environments. However, when it is applied to the downlink of a cellular system with universal frequency reuse, users near the sector boundary may experience significant interference from more than one sector. The use of a minimum mean square error (MMSE)-type receiver may not sufficiently cancel out the interference unless a sufficient number of receive antennas are used. In this paper, we consider the use of inter-sector beamforming that cooperates with a neighboring sector in the same cell to mitigate this interference problem in time-division duplex (TDD) environments. The proposed scheme can avoid interference from an adjacent sector in the same cell, while enhancing the transmit array gain by using the TDD reciprocity. The performance of the proposed scheme is analyzed in terms of the output signal-to-interference-plus-noise power ratio (SINR) and the output capacity when applied to an MMSE-type receiver. The beamforming mode can be analytically switched between the inter-sector and the single-sector mode based on the long-term channel information. Finally, the effectiveness of the proposed scheme is verified by computer simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.8-12
• /
• 2009

We propose BMPA(balanced multimedia packet allocation) scheme. This scheme considers the issue of optimal sub-carrier allocation in OFDMA multicast system. When RT(real time) packets and NRT(non-real time) packets arrive at the same time, BMPA scheme gives higher weight to RT packets than NRT packets and then, it allocates sub-carriers according to the total weight sum of packets in each user. This process acts as both packet scheduler and sub-carrier allocation. Therefore, each user receives multimedia packets with reliability. With simulation results, it shows that BMPA scheme ensures long-term system throughput and, in average RT packet delay, BMPA scheme greatly outperforms multi-user water-filling algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.2
• /
• pp.1-10
• /
• 1982

Presently, most of rail stations are situated on the surface of dowl1town and thus result in heavy traffic congestion and inefficient use of land. This paper analyzes the impact of alternative locations of station On urban traffic patterns by simulating transportation systems, of Busan city. Since location of station has long-term effects on land use and transportation, 20 years forecast of land use change, trip generation, trip distribution, modal split and network assignment was performed for each alternative, and aggregate Impacts On passenger-km and passenger-hour were computed. The result indicated that Bujeon is the most desirable location of station in terms of traffic movement, compared to the alternative locations of Sasang and existing station. Relocation of rail station, however, should be decided with broader analysis including other aspects, such as urban development, environment, construction and operating costs, etc.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.3
• /
• pp.285-292
• /
• 2015

This paper presents a wireless ground reaction force (GRF) sensing system for ambulatory GRF recording. The system is largely divided into three parts: force sensing modules based on optical sensor, outsole type frame, and embedded system for wireless communication. The force sensing module has advantages of the low height, robustness to the moment interference, and stable response in long term use. In simulation study, the strain and stress properties were examined to satisfy the requirements of the GRF sensing system. Four sensing modules were mounted on the toe, ball, and heel of foot shaped frame, respectively. The GRF signals were extracted using Micrpcontroller unit and transferred to the smart phone via Bluetooth communication. We measured the GRF during the normal walking for the validation of the continuous recording capability. The recorded GRF was comparable to the off the shelf stationary force plate.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.4
• /
• pp.213-218
• /
• 2013

In this research, we report on the development of simulation system for performance verification of BMS(Battery Management System) which is utilized in electric vehicles. In the industrial circles, a manufacturer of BMS typically tests their system with real battery packs. However, it takes a long time to test all functions of BMS. Here, we develop BMU(Battery Managament Unit) as an embedded board, which will be installed in electric vehicle for controlling battery packs. All other environment factors for testing BMU are developed in softwares in order to reduce the term of test. Especially, the proposed system consists of cell simulator and CMU(Cell Management Unit) simulator which simulate real battery cells and control battery cells. These simulators enable the BMU to test more battery cells. In addition, proposed system provides diagnosis program in order to diagnose and monitor the condition of BMS which makes the test of BMS more easily. In order to verify the performance of the developed simulator, we have performed the experiment with real battery packs and our simulator. Through comparing two results of experiments, we verify that developed simulator shows better performance in terms of less amount of testing duration though having high reliability.