• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.787-799
• /
• 2017

Although the long-term leakage between the box culvert and the soil contact surface is one of the main causes of the failure in the embankment of the reservoir, there is a little studies on this matter. If a leakage occurs by the structure such as the buried box culvert of reservoir embankment is partially damaged, it is difficult to observe and there is a possibility of damage caused by piping. For these reasons, more research is necessary. In this study, the embankment type of the reservoir is divided into the core type and the homogeneous type when the damaged box culvert passing through the embankment of the reservoir is leaked due to the differential behavior of materials like differential settlement. In view of the condition, the seepage analysis of 2D was performed according to the water level change. The result of the study shows that the possibility of piping increases at the upper part rather than the bottom part of the box culvert when the leakage occurs to the box culvert passing through the embankment of the reservoir. Particularly, it is considered that the presence of the core helps to maintain the seepage stability of the embankment in case where the leakage occurs at the downstream side of the embankment. Also, if there is a drastic decrease on the internal pore water pressure in the embankment of reservoir, it is necessary to consider the possibility of piping.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.280-292
• /
• 2016

Purpose: The purpose of this study was to compare the long-term survival rate and peri-implant marginal bone loss related to multiple risk factors including the clinician's experience. Materials and Methods: Four hundred twenty implants in 146 patients, who had involved a supportive periodontal therapy program every 3 to 6 months and had follow up data for at least 5 years, were selected as the study group. Peri-implant marginal bone loss, data of demographic, implant and surgical characteristics were collected from peri-apical radiographs and chart review. Implant survival was regarded as the remaining with radiographic marginal bone level in excess of 50% of the fixture length for any reason. Results: The cumulative survival rate after 5 years of loading was 94.9%. In binary logistic regression analysis, smoking status (P = 0.033) and presence of spontaneous cover screw exposure (P < 0.001) were significantly related to 5-year survival of implants. In stepwise multiple regression analysis, smoking status (P < 0.001), type of abutment connection (P < 0.001) and implant surface (P = 0.033) were significantly related to peri-implant marginal bone level. And the year of resident was not statistically related to 5-year implant survival in simple logistic regression analysis (P = 0.171). Conclusion: Smoking status, spontaneous cover screw exposure, type of abutment connection and implant surface might influence the implant success. There was no significant correlation between the year of resident and implant failure.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.215-235
• /
• 2024

As artificial intelligence (AI) technology is recognized as a key technology that will determine future national competitiveness, competition for AI technology and industry promotion policies in major countries is intensifying. This study aims to present implications for domestic policy making by analyzing the policies of major countries on the start-up of AI companies, which are the basis of the AI industry ecosystem. The top four countries and the EU for the number of new investment attraction companies in the 2023 AI Index announced by the HAI Research Institute at Stanford University in the United States were selected, The United States enacted the National AI Initiative Act (NAIIA) in 2021. Through this law, The US Government is promoting continued leadership in the United States in AI R&D, developing reliable AI systems in the public and private sectors, building an AI system ecosystem across society, and strengthening DB management and access to AI policies conducted by all federal agencies. In the 14th Five-Year (2021-2025) Plan and 2035 Long-term Goals held in 2021, China has specified AI as the first of the seven strategic high-tech technologies, and is developing policies aimed at becoming the No. 1 AI global powerhouse by 2030. The UK is investing in innovative R&D companies through the 'Future Fund Breakthrough' in 2021, and is expanding related investments by preparing national strategies to leap forward as AI leaders, such as the implementation plan of the national AI strategy in 2022. Israel is supporting technology investment in start-up companies centered on the Innovation Agency, and the Innovation Agency is leading mid- to long-term investments of 2 to 15 years and regulatory reforms for new technologies. The EU is strengthening its digital innovation hub network and creating the InvestEU (European Strategic Investment Fund) and AI investment fund to support the use of AI by SMEs. This study aims to contribute to analyzing the policies of major foreign countries in making AI company start-up policies and providing a basis for Korea's strategy search. The limitations of the study are the limitations of the countries to be analyzed and the failure to attempt comparative analysis of the policy environments of the countries under the same conditions.

• Clinical and Experimental Pediatrics
• /
• v.48 no.6
• /
• pp.669-674
• /
• 2005

Nephrogenic diabetes insipidus (NDI) is a disorder in which the secretion of antidiuretic hormone is normal, but the response of the renal collecting tubules to vasopressin is impaired. Compared with acquired NDI (a-NDI), which is secondary to chronic bilateral incomplete urinary tract obstruction with hydronephrosis, congenital NDI (c-NDI) is a very rare heritable disorder that usually follows the X- linked recessive pattern. Clinical symptoms of c-NDI can be non specific, and often the disease ultimately results in failure to thrive, or mental retardation. Recently, the diagnosis can be confirmed by direct sequencing analysis of the peripheral blood specimens. The long-term results of treatment for c-NDI are not satisfactory. Reports on the follow up of c-NDI cases are rare and there is no report on the cases treated with combinations of three drugs. We report herein a case of severe c-NDI in an 8 year-old-boy with a severely dysconfigurated urinary tract system. The patient and his mother showed a frameshift mutation on the AVPR2 gene on chromosome Xq28:.847_851delTGCTG (p.C283fsX90). The patient showed normal growth and development by treatment with combinations of hydrochlorothiazide ($65mg/m^2$), amiloride (0.3 mg/kg/d) and indomethacin ($100mg/m^2$), yet after five years he needed adjuvant cystostomy to relieve him from the residual symptoms of urgency with polyuria.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.37-44
• /
• 1999

Because of bone resorption, wear of ultra-high molecular weight polyethylene(UHMWPE) in total knee arthroplasty has been recognized as a major factor in long-term failure of knee implant. The surface damage and the following harmful wear debris of UHMWPE is largely related to contact stress. Most of the previous studies focused on the contact condition only at the articulating surface of UHMWPE. Recently, contact stress at the metal-backing interface has been implicated as one of major factors in UHMWPE wear. Therefore, the purpose of the is study is to investigate the effect of the contact stress for different thickness, conformity friction coefficient, and flexion degree of the UHMWPE component in total knee system, considering the contact conditions at both interfaces. In this study, a two-dimensional non-linear plane strain finite element model was developed. The results showed that the maximum value of von-Mises stress occurred below the articulating surface and the contact stress was lower for the more conforming models. All-polyethylene component showed lower stress distribution than the metal-backed component. With increased friction coefficient on the tibiofemoral contact surface, the maximum shear stress increased about twofold.

• Journal of Digital Convergence
• /
• v.17 no.4
• /
• pp.95-105
• /
• 2019

The failure of company management that does not overcome the recession of shipping economy has negative impact on front-end and back-end industries in relation to shipping industry overall. This study aims to derive a measure of government policy support for win-win of ship owners and shippers by performing a survey with experts in ship owners, shippers, and port-related institutions. This study employed a consistent fuzzy preference relation (CFPR) method to provide the priority of government policies. The study results showed that out of all 14 policies, the policy perceived most important was "expansion of participation in share of shipping company or ships of shipper (0.102)" followed by "strengthening of national shipper-centered service quality (0.101)", and "providing a long-term transportation contract model of container cargo (0.085)". To recover the Korean shipping industry via win-win of ship owners and shipper, the policy enforcement is important through correct government policy establishment and priority selection. In this regard, this study contributed to proposing policies and priority of the policies. For the future study, detailed analysis on comparison of perception difference among stakeholders in the shipping industry is needed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.47-56
• /
• 2020

In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.61-72
• /
• 2019

Since the financial crisis in 1997, large scale unemployment and poverty have become serious, but there has been a surge in public and social job creation projects. However, with the limitations of low-wage and short-term jobs, the need for long-term, high quality jobs gradually began to garner attention. In recent years, social enterprises have grown both quantitatively and qualitatively and interest in social enterprises has increased; more specifically, scholars are interested in the determinants of success and failure of social enterprises in the academic field. In this study, we examined the effects of social enterprise characteristics on financial and social performance. In particular, we empirically analyzed social enterprises registered in the Korea Social Enterprise Agency. The financial performance of the social enterprise was measured using the net income ratio, operating income ratio, and the return on asset. The social performance of the social enterprise was measured by the total number of workers and the employment rate of vulnerable social groups. The characteristics of the social enterprise included CEO characteristics (gender, age, experience in operating the social enterprise), firm size, and the elapsed time of authentication. The results of the empirical analysis are as follows. First, as a result of analysis for the effect on financial performance, we found that the financial performance has a statistically significant, positive relationship with firm size, organizational form, government subsidies, and capital adequacy ratio. And we found that the social performance has a statistically significant, negative relationship with CEO age and credit debt dependence. Second, as a result of analysis for the effect on social performance, we found that the total number of workers had a significant, positive relationship with CEO gender and CEO age, as well as firm size, government subsidies; whereas the total number of workers had a significant, negative relationship with certification type and industry dummy. Comparatively, the employment rate of the vulnerable social groups had a significant, positive relationship with CEO gender and certification type, but there was no statistically significant relationship with the government subsidies or firm size.

• Journal of Chest Surgery
• /
• v.36 no.12
• /
• pp.911-920
• /
• 2003

In this study, we analyzed the long-term surgical outcome of partial atrioventricular septal defects during the past 17 years at Seoul National University Hospital. Material and Method: A retrospective analysis on mortality, survival, and reoperation and their risk factors was done in 93 patients who underwent surgical correction of partial atrioventricular septal defects between April 1986 and December 2002. 32 patients were male and 61 were female with a median age of 68 months (3∼818 months) and a mean follow-up period of 108 months (1∼200 months). Result: There were 4 operative deaths (4.3%) and one mortality during the follow-up period. 3, 5, 10, and 15 year actuarial survival rates were 95.7%, 94.3%, 94,3%, and 94.3%, respectively. After the surgical correction, left atrioventricular valve Incompetence was improved in 61patients (67.7%), remained same as the preoperative status in 14 patients (15.1%), and was aggravated in 12 patients (12.9%). Reoperation was performed in 8 patients (9.0%) after a mean interval of 38.6 months (3∼136 months). Freedom from reoperation rates at 3, 5, 10, and 15 years after surgical correction were 94.0%, 91.4%, 91.4%, and 88,2%, respectively Reasons for reoperation were 7 left atrioventricular valve incompetence, 2 left ventricular outflow tract obstruction, a residual atrial septal defect, a left atrioventricular valve stenosis, and a right ventricular failure. Left ventricular outflow tract obstruction was the only statistically significant factor. In ten patients, significant arrhythmia was developed and three of them were supraventricular arrhythmia. Complete atrioventricular block occurred in 7 patients and permanent pacemakers were implanted in six of them. Conclusion: Surgical corrections of partial atrioventricular septal defects were performed with low operative mortality. Since left atrioventricular valve incompetence was the most common cause of reoperation and left ventricular outflow tract obstruction was the only risk factor for reoperation, a precise estimation of the left atrioventricular valve morphology and the structure of left ventricular outflow tract are needed. Although left ventricular outflow tract obstruction rarely developed, reoperation was frequently required and resection of subaortic tissue could be peformed but the possibility of recurrence was high, so modified Konno operation could be performed with satisfactory results. Complete atrioventricular block developed frequently in early periods, but was overcome with a precise anatomical understanding of conduction system and experience.