• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.35-42
• /
• 2007

This paper presents an INS(Inertial Navigation System) grade, surface micro-machined differential resonant accelerometer(DRXL) manufactured by an epitaxially grown thick poly silicon process. The proposed DRXL system generates a differential digital output upon an applied acceleration, in which frequency transition is measured due to gap dependent electrical stiffness change. To facilitate the resonance dynamics of the electromechanical system, the micromachined DRXL device is packaged by using the wafer level vacuum sealing process. To test the DRXL performance, a nonlinear self-oscillation loop is designed based on the extended describing function technique. The oscillation loop is implemented using discrete electronic elements including precision charge amplifier and hard feedback nonlinearity. The performance test of the DRXL system shows that the sensitivity of the accelerometer is 24 Hz/g and its long term bias stability is about 2 mg($1{\sigma}$) with dynamic range of ${\sigma}70g$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.601-604
• /
• 1999

This Paper proposes the simple and efficient image retrieval algorithm using subregional texture features. In order to retrieve images in terms of its contents, it is required to obtain a precise segmentation. However, it is very difficult and takes a long computing time. Therefore. this paper proposes a simple segmentation method, which is to divide an image into high and low entropy regions by using Picture Information Measure (PIM). Also, in order to describe texture characteristics of each region, this paper suggest six different texture features produced on the basis of co-occurrence matrix. For an image retrieval system, a normalised correlation is adopted as a similarity function, which is not dependent on the range of each texture feature values. Finally, this proposed algorithm is applied to a various images and produces competitive results.

• 에너지공학
• /
• 제7권1호
• /
• pp.122-130
• /
• 1998

A simplified heat transfer model for the cooling capability of the AP 600 PCCS is proposed I this paper. As the PCCS domain is covered with very thin and long water film, it is phenomenologically divided into 3 regions; water entrance effect region, asymptotic region, and air entrance effect region. As the length of the asymptotic region is estimated to be over 90% of the whole domain, the phenomena in the asymptotic region is focused. Using the analogy between heat and mass transfer phenomena in a turbulent situation, a new dependent variable combining temperature and vapor mass fraction was defined. The similarity between the PCCs phenomena in the asymptotic region and the buoyant air flow phenomena on a vertical heated plate is derived. Using the similarity, the simplified heat transfer correlations for the interfacial heat fluxes and the ratios of latent heat transfer to sensible heat transfer were established. To verify the accuracy of the correlation, the results of this study were compared with those of other numerical analyses performed for the same configuration and they are well within the range of 15% difference.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.82-88
• /
• 2009

The output of the encoder is a digital pulse, which is also easy to be connected to a digital controller. There are various angular velocity detecting methods of M, T, and M/T. Each of them has its own properties. There is a common limitation that the angular velocity detection period is strongly dependent on the destination velocity magnitude in case of ultimate low range. They have ultimately long detection period or cannot even detect angular velocity at near zero velocity. This paper proposes a zero velocity detectable sensor algorithm with the dual encoder system. The sensor algorithm is able to keep detection period moderately at near zero velocity and even detect zero velocity within nominal period. It is useful for detecting velocity in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the algorithm validity.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.39-45
• /
• 2004

The commercial viability of heat exchanger is mainly dependent on their long-term fouling characteristics because the fouling increases the pressure loss and degrades the thermal Performance of a heat exchanger. An experimental study was performed to investigate the characteristics of fluid flow and heat transfer in a fluidized bed heat exchanger with circulating various solid particles. The Present work showed that the flow velocity range for Possible collision between the tube wall and the particles was higher with heavier density solid particles. in audition. the solid particle periodically hitting the tube wall broke the thermal boundary laver. and increased the rate of heat transfer.

• Structural Engineering and Mechanics
• /
• 제67권2호
• /
• pp.143-153
• /
• 2018

Thermal buckling of nonlocal flexoelectric nanoplates incorporating surface effects is analyzed for the first time. Coupling of strain gradients and electrical polarizations is introduced by flexoelectricity. It is assumed that flexoelectric nanoplate is subjected to uniform and linear temperature distributions. Long range interaction between atoms of nanoplate is modeled via nonlocal elasticity theory. The residual surface stresses which are usually neglected in modeling of flexoelectric nanoplates are incorporated into nonlocal elasticity to provide better understanding of the physic of problem. A Galerkin-based approach is implemented to solve the governing equations derived from Hamilton's principle are solved. The verification of obtained results is performed by comparing buckling loads of flexoelectric nanoplate with previous data. It is shown that buckling loads of flexoelectric nanoplate are significantly affected by thermal loading type, temperature change, nonlocal parameter, surface effect, plate thickness and boundary conditions.

• Wind and Structures
• /
• 제17권3호
• /
• pp.317-343
• /
• 2013

When evaluating flutter instability, it is often assumed that incident wind is normal to the longitudinal axis of a bridge and the flutter critical wind speed estimated from this direction is most unfavorable. However, the results obtained in this study via oblique sectional model tests of four typical types of bridge decks show that the lowest flutter critical wind speeds often occur in the yaw wind cases. The four types of bridge decks tested include a flat single-box deck, a flat ${\Pi}$-shaped thin-wall deck, a flat twin side-girder deck, and a truss-stiffened deck with and without a narrow central gap. The yaw wind effect could reduce the critical wind speed by about 6%, 2%, 8%, 7%, respectively, for the above four types of decks within a wind inclination angle range between $-3^{\circ}$ and $3^{\circ}$, and the yaw wind angles corresponding to the minimal critical wind speeds are between $4^{\circ}$ and $15^{\circ}$. It was also found that the flutter critical wind speed varies in an undulate manner with the increase of yaw angle, and the variation pattern is largely dependent on both deck shape and wind inclination angle. Therefore, the cosine rule based on the mean wind decomposition is generally inapplicable to the estimation of flutter critical wind speed of long-span bridges under skew winds. The unfavorable effect of yaw wind on the flutter instability of long-span bridges should be taken into consideration seriously in the future practice, especially for supper-long span bridges in strong wind regions.

• 디지털콘텐츠학회 논문지
• /
• 제10권2호
• /
• pp.357-365
• /
• 2009

사용자가 느끼는 QoS를 최대화하면서 네트워크 대역폭의 특성을 효율적으로 활용하기 위해서는 네트워크의 패킷 손실과 대기행렬의 지연 시간을 구체적으로 예측이 필요하다. 네트워크의 자원이 충분치 않은 무선 네트워크 환경의 경우 예측은 특히 중요한 문제로 부각된다. 본 연구는 무선 네트워크의 성능 모델을 개발하는 것을 목표로 하고 있다. 실험을 위해서 실제 운영 중인 무선 네트워크 환경에서 패킷 흐름 자료를 수집하였다. 무선 환경에서의 패킷 개수 공정과 대역폭 공정은 장기 기억 특성을 갖고 있는 것으로 나타났다. 실험을 통해서 네트워크 트래픽의 주요 성능 변수들을 추출해 냈고, 대기 시간과 버퍼 오버플로우 확률에 대한 분석적 모델을 개발하였다. 프랙탈 브라운 운동 (FBM)을 이용한 대기 행렬의 꼬리 확률을 얻었고, 대기행렬의 길이 모델을 통해서 평균대기 지연을 표현하였다. 실측 데이터를 활용하여 개발한 성능 모델이 IEEE 802.11b 네트워크 트래픽의 물리적 특성을 잘 표현하고 있음을 알 수가 있다

• Wind and Structures
• /
• 제12권5호
• /
• pp.413-424
• /
• 2009

A series of wind tunnel free-decay sectional model dynamic tests were conducted to examine the effects of torsional-to-vertical natural frequency ratio of 2DOF bridge dynamic systems on the aerodynamic and dynamic properties of bridge decks. The natural frequency ratios tested were around 2.2:1 and 1.2:1 respectively, with the fundamental vertical natural frequency of the system held constant for all the tests. Three 2.9 m long twin-deck bridge sectional models, with a zero, 16% (intermediate gap) and 35% (large gap) gap-to-width ratio, respectively, were tested to determine whether the effects of frequency ratio are dependent on bridge deck cross-section shapes. The results of wind tunnel tests suggest that for the model with a zero gap-width, a model to approximate a thin flat plate, the flutter derivatives, and consequently the aerodynamic forces, are relatively independent of the torsional-to-vertical frequency ratio for a relatively large range of reduced wind velocities, while for the models with an intermediate gap-width (around 16%) and a large gap-width (around 35%), some of the flutter derivatives, and therefore the aerodynamic forces, are evidently dependent on the frequency ratio for most of the tested reduced velocities. A comparison of the modal damping ratios also suggests that the torsional damping ratio is much more sensitive to the frequency ratio, especially for the two models with nonzero gap (16% and 35% gap-width). The test results clearly show that the effects of the frequency ratio on the flutter derivatives and the aerodynamic forces were dependent on the aerodynamic cross-section shape of the bridge deck.

• Fisheries and Aquatic Sciences
• /
• 제25권4호
• /
• pp.214-230
• /
• 2022

Loss and damage have become a vital contemporary issue in climate change studies and actions in developing countries. However, studies are scant on this in the fisheries sector around the world. In Bangladesh, there is no study on the loss and damage in fisheries dependent communities. This study assesses economic and non-economic loss and damage to coastal shrimp farms due to cyclone Bulbul in Gabura Union of Shyamnagar Upazila, Satkhira district, using a mixed method approach. Results show that all shrimp farms' dependent communities are affected by cyclone Bulbul to some extent. About 14%, 57%, and 29% of the farms were totally, heavily and moderately damaged due to farm inundation and dyke damage. The estimated mean loss and damage per shrimp farm was worth USD 4,633. Around 31% and 72% of the farms' fencing nets and traps were lost, which was worth USD 333 per farm. There were also loss and damage to other resources such as houses, solar panels, livestock and agricultural crops where the estimated mean loss and damage per household was worth USD 3,170. This study reported that the rich shrimp farmers encountered proportionately more economic loss and damage than their poor counterparts. However, this does not mean that the poor suffered less. The current study found a range of non-economic loss and damage in different aspects of the shrimp farmers' household members such as unbearable mental pain, deterioration of health, physical injuries, disabilities, etc. and access to services (e.g., inadequate food, lack of safe drinking water, lack of medical facilities, disruption of education systems), social infrastructure (e.g., damage of roads and markets) and disturbance of cultural functions. The findings suggest that urgent short- and long-term actions may be taken to save the aquaculture farms and dependent livelihoods from economic and non-economic loss and damage to cyclones in future.