• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.428-433
• /
• 2004

The aim of this study was to investigate the histochemical parameters of muscle fibers, and to estimate the correlation between these histological parameters and carcass traits in pigs. A total of 230 crossbred Duroc$\times$(Yorkshire$\times$Landrace) pigs (149 gilts and 81 castrated male pigs) was evaluated. Carcass traits (carcass weight, backfat thickness, and loin eye area), muscle fiber size (crosssectional area, diameter, and perimeter), muscle fiber number (density of fibers/$mm^2$ and total number of fibers), and fiber type composition (percentages of myofibers and relative areas of each fiber type) were evaluated. Mean cross-sectional area (CSA) and type IIB fiber CSA were positively correlated to carcass weight, backfat thickness and loin eye area. Mean fiber CSA was mostly related to type IIB CSA (r=0.98) as a result of the high percentage of type IIB fibers in the longissimus muscle. Correlations between fiber diameters and perimeters were also high, and showed similar results with CSA. Mean fiber density was negatively correlated to carcass weight (r=-0.24), backfat thickness (r=-0.18) and loin eye area (r=-0.27). To the contrary, total fiber number was positively correlated with carcass weight (r=0.27) and loin eye area (r=0.53). Carcass weight and loin eyZe area were not significantly related to muscle fiber composition. For backfat thickness, there was an opposition between type IIA percentage, which was positively related and type IIB percentage, which was negatively related. Fiber type composition of type I and IIA fibers were negatively correlated to that of type IIB fibers (r=-0.67 to -0.74). In the present study, carcass weight and loin eye area were positively correlated to CSA and negatively correlated to fiber density. But, these relationships were generally low. The fiber density was strongly affected by muscle fiber size and the total fiber number was affected either by CSA of muscle fiber and loin eye area. Fiber type composition was much more related to their numerical abundance than their CSA.

• Food Science of Animal Resources
• /
• v.18 no.4
• /
• pp.358-363
• /
• 1998

The objectives of this study were to evaluate the effect of previous heating temperature and holding times on the thermal behavior of pork loin muscle by DSC. Pork loin muscles were heated to achieve the following end-point temperatures: 40$^{\circ}C$, 50$^{\circ}C$, 60$^{\circ}C$, 70$^{\circ}C$, 80$^{\circ}C$ at heating rate = 10$^{\circ}C$/min. The first peak was disappeared when samples were initially heated to 50$^{\circ}C$ for 1 minute. As end-point temperature was raised, major peaks were progressively disappeared and peaks were lost completely at 80$^{\circ}C$. Especially, peaks were completely disappeared at 70$^{\circ}C$ for 10 minute. Increasing of exposure time to elevated temperature also increased denaturation, thereby reducing the area of the thermogram.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.957-968
• /
• 2020

The influence of muscle architecture on muscle fiber characteristics and meat quality has not been fully elucidated. In the present study, muscle fiber characteristics on the chop surface of pork loin (M. longissimus thoracis et lumborum, LTL), pennation angle degree, and meat quality were evaluated to understand the pork LTL architecture and its relationship with the loin chop quality. Muscle fiber pennation degree ranged from 51.33° to 69.00°, resulting in an ellipse-shaped muscle fiber on the surface of pork loin chop. The cross-sectional area (CSA) on the sections cut vertical to the muscle length (M-Vertical) was considerably larger (p<0.05) than that on the sections cut vertical to the muscle fiber orientation (F-Vertical) regardless of the fiber type. Pennation angle is positively correlated with CSAs of F-Vertical (p<0.05) and with Warner-Bratzler shear force (r=0.53, p<0.01). Besides the shear force, lightness and pH were positively correlated with the fiber composition and CSA of IIX fiber (p<0.05); however, the redness, yellowness, drip loss, and cooking loss were not correlated with the pennation angle and muscle fiber characteristics on the chop surface (p>0.05). These observations might help us in better understanding pork loin architecture and the relationship between the pennation angle, muscle fiber characteristics, and meat quality of pork loin chop.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.229-236
• /
• 2014

This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1519-1523
• /
• 2005

By screening a subtracted cDNA library constructed with mRNA obtained from the longissimus dorsi muscles of F1 hybrids Landrace${\times}$Yorkshire and their Yorkshire female parents, we isolated two partial sequences coding for the H3-K4-specific methyltransferase (KIAA1717) and skeletal muscle myosin regulatory light chain (HUMMLC2B) genes. In the present work we investigated two SNPs, one (C1354T) at the 3' untranslated region (UTR) of KIAA1717 and one (A345G) at the SINE (PRE-1) element of HUMMLC2B, in a resource population derived from crossing Chinese Meishan and Large White pig. The selected pigs were genotyped by means of a PCR-RFLP protocol. Significant associations were observed for the KIAA1717 C1354T polymorphic site with thorax-waist backfat thickness (p<0.05), buttock backfat thickness (p<0.05), average backfat thickness (p<0.05), loin eye height (p<0.05), loin eye area (p<0.05), carcass length to 1$^{st}$ spondyle (p<0.01) and carcass length to 1st rib (p<0.01). HUMMLC2B A345G were significantly associated with loin eye width (p<0.05), loin eye area (p<0.05). Further studies are needed to confirm these preliminary results.

• Molecules and Cells
• /
• v.25 no.3
• /
• pp.428-437
• /
• 2008

To identify transcriptional markers for beef traits related to meat tenderness and moisture, we measured the transcriptome of the Longissimus dorsi skeletal muscle in 10 Korean native cattle (KNC). We analyzed the correlation between the beef transcriptome and measurements of four different beef traits, shear force (SF), water holding capacity (WHC), cooking loss (CL), and loin eye area (LEA). We obtained non-overlapping and unique panels of genes showing strong correlations (${\mid}r{\mid}$ > 0.8) with SF, WHC, CL, and LEA, respectively. Functional studies of these genes indicated that SF was mainly related to energy metabolism, and LEA to rRNA processing. Interestingly, our data suggested that WHC is influenced by protein metabolism. Overall, the skeletal muscle transcriptome pointed to the importance of energy and protein metabolism in determining meat quality after the aging process. The panels of transcripts for beef traits may be useful for predicting meat tenderness and moisture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1529-1534
• /
• 2008

The aim of this study was directed at exploring the possible use of muscle fiber characteristics as new selection traits for improving both porcine lean meat production and quality. A total of 174 (114 Yorkshire, 30 Landrace, and 30 Meishan) pigs were used for this study, and lean meat production ability was estimated by backfat thickness and loin eye area. The Longissimus dorsi muscle was taken in order to measure meat quality and muscle fiber characteristics. Due to the high correlations between total muscle fiber number and most of the performance traits, all pigs were classified into three groups (low, intermediate, or high) by total muscle fiber number using cluster analysis. The high group had the highest loin eye area (p<0.001). The meat quality traits were within normal ranges as reddish pink, firm, and nonexudative (RFN) pork, but the groups classified as intermediate and high had relatively large drip loss percentages (p<0.05), produced more than twice the amount of pale, soft, and exudative (PSE) pork as compared to the low group. The group with a high total muscle fiber number was further classified, based on type 2b fiber percentage, into low or high groups by cluster analysis. The results showed that the low type 2b fiber group had good loin eye area (p<0.05), small drip loss (p<0.05), and did not produce PSE pork. For these reasons, a high total muscle fiber number, with a low percentage of type 2b fibers, may be suitable in selecting for improvements in both lean meat production and meat quality.

• Journal of Animal Reproduction and Biotechnology
• /
• v.39 no.2
• /
• pp.114-120
• /
• 2024

Background: The Hanwoo industry must develop technologies that can increase the production of preferred cuts to match changing consumer trends. In this study, we aimed to estimate the genetic parameters for carcass traits (carcass weight, eye muscle area, back fat thickness, and intramuscular fat) and primal cut traits (tenderloin, loin, strip loin, neck, clod, top round, bottom round, brisket, shank, and rib) in a Hanwoo population to obtain basic data for improving primal cut productivity. Methods: Data from 1,905 Hanwoo steers, including carcass traits and primal cut weights, were collected. Genetic parameters were estimated using REMLF90 in a multi-trait analysis. Results: High heritability was found for carcass weight (0.52) and strip loin yield (0.63). Genetic correlations between carcass weight and primal cut weights ranged from 0.52 to 0.93. Conclusions: This study demonstrates the significant potential for genetic improvement in Hanwoo cattle through selective breeding, particularly for traits with high heritability and genetic correlations. These findings provide crucial insights into optimizing breeding programs to improve Hanwoo cattle production efficiency.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.15-27
• /
• 2023

Jeju Sasa borealis (S. borealis) is indigenous to the Halla Mountain area of Jeju Island, Republic of Korea. However, its dominance has retarded the development of other plant species and lowered biodiversity in this region. The aim of this study was to determine whether S. borealis silage (SS) supplementation affects the chemical composition and antioxidant activity in the fresh meat of Korean native goats (Capra hircus coreanae). The experiment was conducted on 12 Korean native goats at the finisher stage. The feeding groups were the Control (total mixed ration, TMR) and the Treatment (80% TMR + 20% SS). The animals were adapted for two weeks and then subjected to a six-month breeding experiment. Meat samples were excised from the neck, loin, rib, front leg, and hind leg of the slaughtered animals. The meat derived from the treatment group contained more taurine and anserine than that derived from the control group. Both groups did not significantly differ in terms of ω-6/ω-3 fatty acid ratio. The loin and front leg of the treatment group contained significantly higher vitamin E levels than those of the control group. DPPH, ABTS, and FRAP analyses disclosed that the loin and front leg had significantly higher antioxidant activity (p<0.05) than the other parts. Moreover, the loin and front leg cuts of the treatment group had higher antioxidant activity than those of the control group. The present study demonstrated that S. borealis supplementation could effectively improve Korean native goat meat quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.263-267
• /
• 2001

Beef samples of loin eye area from New Zealand, USA and three quality grades of Hanwoo were analyzed using near infrared spectrophotometer with reference values from laboratory optical Chromameter to determine effective spectrum range and mathematical treatment for determination of color values. $R^2s$ of prediction models were not improved much by calibrating with whole light range (400~2500 nm) compared to using visible range (400~1100 nm). Standard errors of calibration and prediction were influenced by possible bias due to sampling non-homogeneous sample sources. However, partial differentiation in the first order was more stable against sampling biases than second derivatives of the spectra. Lightness value was little different among the five sample sources of beef. Beef samples from USA were brighter and more reddish than beefs of Hanwoo or from New Zealand (p<0.05). Yellowness of USA beef was the highest followed by beef from New Zealand, which was also higher than Hanwoo beefs of three quality grades (p<0.05).