• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.128-134
• /
• 2018

With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. Under this study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream.After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, as a result of analyzing the diffusion area, flow depth, erosion and deposition volume of the debris flow generated from the deposition part after modifying the location of the check dams with the damages occurring on private residences and agricultural land located on the upstream area, the highest reduction effect was shown when the check dam is installed in the maximal discharge points.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.519-519
• /
• 2023

Estuarine dams are a recent and global phenomenon. While estuarine dams can provide the benefit of improved freshwater resources, they can also alter estuarine processes. Due to the wide range of estuarine types and estuarine dam configurations, the effect of estuarine dams on estuaries is not well understood in general. To develop a systematic understanding of the effect of estuarine dam location and freshwater discharge interval on a range of estuarine types (strongly stratified, partially mixed, periodically stratified, and well-mixed), this study used a coupled hydrodynamic-sediment dynamic numerical model (COAWST) and compared flow, sediment transport, and morphological conditions in the pre- and post-dam estuaries. For each estuarine type, scenarios with dam locations at 20, 55 and 90 km from the mouth and discharge intervals of a discharge every 0.5, 3, and 7 days were investigated. The results were analyzed in terms of change in tide, river discharge, estuarine classification, and sediment flux mechanism. The estuarine dam location primarily affected the tide-dominated estuaries, and the resonance length was an important length scale affecting the tidal currents and Stokes return flow. When the location was less than the resonance length, the tidal currents and Stokes return flow were most reduced due to the loss of tidal prism, the dead-end channel, and the shift from mixed to standing tides. The discharge interval primarily affected the river-dominated estuaries, and the tidal cycle period was an important time scale. When the interval was greater than the tidal cycle period, notable seaward discharge pulses and freshwater fronts occurred. Dams located near the mouth with large discharge interval differed the most from their pre-dam condition based on the estuarine classification. Greater discharge intervals, associated with large discharge magnitudes, resulted in scour and seaward sediment flux in the river-dominated estuaries, and the dam located near the resonance length resulted in the greatest landward tidal pumping sediment flux and deposition in the tide-dominated estuaries.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.11-26
• /
• 1997

The purpose of this study is to analyze the locational characteristics of bank branch offices in Kangnam-Gu, Seoul by using Geographic Information System. The number of bank branch offices have sharply increased due to financial liberalization, while the scale of them is getting smaller. The procedure of this research has four steps. First, the spatial distribution of bank branch offices in Seoul is analyzed by the places and time. Second, the spatial variations of bank offices in dong districts of Seoul is explained by factor analysis and multiple regression analysis. Third, the location-allocation model which is embedded within network module in Arc/Info is applied in order to find out optimal location of bank offices in Kangnam-Gu. Finally, the grid module is used in creating the potential surface map for locational sites of new bank branch offices The factors to affect the location of the bank offices contain mainly economic variables including local tax, collUl1ercial area, total establismnent and total employment. The actual locational pattern of bank offices is similar to the idealized locational pattern proposed by the function of min-distance in location-allocation models. In conclusion, this study shows that spatial analysis functions may potentially be improved using GIS technologies. However in order to analyze the location of bank offices more precisely, it should be found out the way to collect more appropriate data, construct computerized base maps, and investigate consumer behaviour and behavioural characteristics of bank themselves..

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.53-60
• /
• 2012

This research is an illustrative research to verify the thermo environmental change created after introduction of indoor pond through abridged model test and simulation analysis. Especially, temperature and comfort level are analyzed by adjusting factors like size of water space, distance length, and location. Summary of the research is as follows. First, the most effective size of water space is 7% of the indoor size, from southern side. Temperature reduction effect is about $1.6^{\circ}C$(5.5%), and for the comfort level, it is found that pmv index increases 8%. Second, based on the simulation of distance length with the sphere, it is more effective as it is close to the surface. If distance length is more than 0.5m, there is no effect on reduction of temperature and comfort level of indoor environment. Lastly, for the analysis by location of the introduced water space, simulation is undertaken by dividing the water space (14% of the indoor size) with front, side, rear and center types. Temperature reduction effect is found to be : front type ($-1.53^{\circ}C$), side type ($-0.82^{\circ}C$), rear type ($-0.44^{\circ}C$), center type ($-0.28^{\circ}C$), respectively. The indoor environment change data by introduction of water space, found in this research, is at initial phase, but it is deemed to be a basic data to refer when planning actual water space.

• Journal of Information Processing Systems
• /
• v.19 no.6
• /
• pp.791-802
• /
• 2023

The manual inspection of photovoltaic (PV) panels to meet the requirements of inspection work for large-scale PV power plants is challenging. We present a hot spot detection and positioning method to detect hot spots in batches and locate their latitudes and longitudes. First, a network based on the YOLOv3 architecture was utilized to identify hot spots. The innovation is to modify the RU_1 unit in the YOLOv3 model for hot spot detection in the far field of view and add a neural network residual unit for fusion. In addition, because of the misidentification problem in the infrared images of the solar PV panels, the DeepLab v3+ model was adopted to segment the PV panels to filter out the misidentification caused by bright spots on the ground. Finally, the latitude and longitude of the hot spot are calculated according to the geometric positioning method utilizing known information such as the drone's yaw angle, shooting height, and lens field-of-view. The experimental results indicate that the hot spot recognition rate accuracy is above 98%. When keeping the drone 25 m off the ground, the hot spot positioning error is at the decimeter level.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2011

In order to analyze the influence of the noise on a cross-well traveltime tomography to detect a small scale low velocity body in a homogeneous medium, the first arrival travel times were computed one a tunnel model by a finite-difference ray tracing scheme. Three different types and four different intensity levels of white noises were added to the computed first arrival travel times, and velocity tomograms were constructed using an iterative inversion method (SIRT). Tomograms with the noise intensity up to 10% of the maximum traveltime delay in the tunnel model, showed the exact location of the tunnel. However, the velocity shown at the tunnel location was not close to air velocity but only slightly less than the velocity of the background medium. The additive random noise showed significantly less degree of influence on the resulting tomogram than the source- and receiver consistent noise.

• Child Health Nursing Research
• /
• v.26 no.4
• /
• pp.393-401
• /
• 2020

Purpose: This pilot study aimed to describe children's social contact patterns and to analyze factors related to their social contacts. Methods: The participants were 30 children aged ≥13 months to <7 years, whose teachers at childcare centers and parents at home were asked to maintain diaries of their social contacts prospectively for 24 hours. Data were collected from November 30, 2018, to January 7, 2019. Results: The 30 participating children were in contact with 363 persons in a 24-hours period (mean, 12.1±9.1). The number of contacts showed significant relationships with day of the week (p<.001), number of family members/cohabitants (p=.015), area of residence (p=.003), and type of housing (p=.002). A multiple regression model showed significantly higher numbers of contacts on weekdays (B=10.64, p=.010). Physical versus non-physical types of contact showed significant differences in terms of duration, location, and frequency (p<.001). The duration of contacts showed significant relationships with their location and frequency (p<.001), while the frequency of contacts was significantly related to their location (p<.001). Conclusion: This is the first survey describing the characteristics of Korean preschool children's social contacts. Further large-scale social contact studies of children should be conducted.

• Structural Engineering and Mechanics
• /
• v.89 no.1
• /
• pp.61-75
• /
• 2024

Strengthening of hollow structural sections using through-bolts is a cost-effective and straightforward approach. It's a versatile method that can be applied during both design and service phases, serving as a non-disruptive and budget-friendly retrofitting solution. Existing research on axially loaded hollow sections T-joints has demonstrated that this technique can amplify the joint strength by 50%, where single bolt could enhance the strength of the joint by 35%. However, there's a gap in understanding their use for K-joints. As the behavior of K-joints is more complex, and they are widely existent in structures, this study aims to bridge that gap by conducting comprehensive parametric study using finite element analysis. Numerical investigation was conducted to evaluate the effect of through bolts on K-joints focusing on using single through bolt to achieve most of the strengthening effect. A full-scale parametric model was developed to investigate the effect of various geometric parameters of the joint. This study concluded the existence of optimal bolt location to achieve the highest strength gain for the joint. Moreover, a rigorous statistical analysis was conducted on the data to propose design equations to predict optimal bolt location and the corresponding strength gain implementing the verified by finite element models.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.4
• /
• pp.253-262
• /
• 1992

A numerical procedure is introduced to calculate local ventilation effectiveness using the definitions of local decay rate and local mean age. A low Reynolds number $k-{\varepsilon}$ model is implemented to calculate steady state turbulent velocity distributions, and a step-down method is used to calculate transient concentration distributions. Simulations are carried out for several different values of air change rates and several different diffuser angles in a two-dimensional model of a half scale office room. The results show that the local ventilation effectiveness within a room could vary significantly from one location to another. The nominal air change rate based on the assumption of complete mixing of room air does not provide the local ventilation effectiveness information. It is numerically proved that the local mean age distribution obtained from the transient calculation is equivalent to the steady state concentration distribution with homogeneously distributed contaminant sources.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.935-944
• /
• 2010

In this paper, we develop the noninformative priors for the reliability in a stress-strength model where a strength X and a stress Y have independent exponential distributions with different scale parameters and a common location parameter. We derive the reference priors and prove the propriety of joint posterior distribution under the general prior including the reference priors. Through the simulation study, we show that the proposed reference priors match the target coverage probabilities in a frequentist sense.