• 한국해양공학회지
• /
• 제37권4호
• /
• pp.145-157
• /
• 2023

Due to a recent increase in maritime activities in South Korea, the frequency of maritime distress is escalating and poses a significant threat to lives and property. The aim of this study was to validate a drift trajectory prediction technique to help mitigate the damages caused by maritime distress incidents. In this study, OpenDrift was verified using satellite drifter data from the Korea Hydrographic and Oceanographic Agency. OpenDrift is a Monte-Carlo-based Lagrangian trajectory modeling framework that allows for considering leeway, an important factor in predicting the movement of floating marine objects. The simulation results showed no significant differences in the performance of drift trajectory prediction when considering leeway using four evaluation methods (normalized cumulative Lagrangian separation, root mean squared error, mean absolute error, and Euclidean distance). However, leeway improved the performance in an analysis of location prediction conformance for maritime search and rescue operations. Therefore, the findings of this study suggest that it is important to consider leeway in drift trajectory prediction for effective maritime search and rescue operations. The results could help with future research on drift trajectory prediction of various floating objects, including marine debris, satellite drifters, and sea ice.

• 정보처리학회논문지C
• /
• 제11C권5호
• /
• pp.659-670
• /
• 2004

핸드오프는 무선 셀룰러 환경에서 사용자의 이동성(Mobility)을 유지해줄 수 있는 가장 중요한 기술중의 하나이다. 핸드오프 기술은 사용자가 이동할 주변 셀에 대한 대역폭 예약과 관련이 있다. 또한, 대역폭 예약은 사용자가 이동한 새로운 영역에서 이전 영역에서와 같은 레벨의 데이터나 서비스를 받기 위해서 핸드오프 이전에 실시되어야 한다. 이러한 무선 셀룰러 환경에서 효과적으로 대역폭을 사용하기 위하여 사용자의 이동성을 예측하는 기술은 핸드오프 호의 실패율(Dropping Probability)과 핸드오프 지연(Latency)을 줄이는 효과적인 방법이다. 최근에 제시된 ZMHB 알고리즘은 기존의 알고리즘과는 달리 셀 내부의 이동 경로를 저장한 히스토리를 이용하여 사용자가 이동할 셀을 예측하였다. 그러나, 모든 사용자에 대하여 80～85% 정도의 예측 정확도만을 보인다. 본 논문에서는 ZMHB 알고리즘에서 사용하는 존(Zone)을 세분화하여 이동 패턴을 저장하고, 이를 예측에 이용하는 Detailed-ZMHB 예측 알고리즘을 제안하고 성능 평가 결과를 보인다.

• 지구물리
• /
• 제5권2호
• /
• pp.75-86
• /
• 2002

평택 및 인천의 액화석유가스(LPG) 지하저장기지에 대해 VSP(Vertical Seismic Profiling)탐사를 터널에 응용한 TSP(Tunnel Seismic Prediction)탐사를 시공 중에 실시하였다. 평택 LPG 지하저장기지에서의 TSP탐사는 저장동굴이 위치한 남양호 하부에 존재하고 사전조사단계에서 파악된 단층의 방향과 규모를 확인하기 위하여 실시하였다. 단층의 위치 및 규모를 입체적으로 파악하기 위하여 진입터널, 수벽공터널 및 공사용터널에서 TSP탐사를 수행하였으며, 진입터널에서 천공된 4공의 조사 공과 비교되었다. TSP탐사 결과는 조사공 결과와 일치하였고, 파악된 단층대의 위치에 따라 기존에 설계된 저장동굴의 배치와 연장을 변경하였다. 해저에 건설된 인천 LPG 지하저장기지의 경우 시공 중에 많은 출수가 있어 효과적인 지수를 위해 지질구조에 대한 정확한 파악이 요구되었다. TSP탐사에 의한 파쇄대 분포의 파악으로 적절한 지보 및 그라우팅 대책이 이루어졌다.

• 한국분무공학회지
• /
• 제18권1호
• /
• pp.35-43
• /
• 2013

The empirical correlations for the prediction of breakup length of liquid jet in uniform cross flow are reviewed and classified in this study. The breakup length of liquid jets in cross flow was normally discussed in terms of the distances from the nozzle exit to the column breakup location in the x and y directions, called as column fracture distance and column fracture height, respectively. The empirical correlations for the prediction of column fracture distance can be classified as constant form, momentum flux ratio form, Weber number form and other parameter form, respectively. In addition, the empirical correlations for the prediction of column fracture height can be grouped as momentum flux ratio form, Weber number form and other parameter form, respectively. It can be summarized that the breakup length of liquid jet in a cross flow is a basically function of the liquid to air momentum flux ratio. However, Weber number, liquid-to-air viscosity ratio and density ratio, Reynolds number or Ohnesorge number were incorporated in the empirical correlations depending on the investigators. It is clear that there exist the remarkable discrepancies of predicted values by the existing correlations even though many correlations have the same functional form. The possible reasons for discrepancies can be summarized as the different experimental conditions including jet operating condition and nozzle geometry, measurement and image processing techniques introduced in the experiment, difficulties in defining the breakup location etc. The evaluation of the existing empirical correlations for the prediction of breakup length of liquid jet in a uniform cross flow is required.

• 정보처리학회논문지D
• /
• 제9D권5호
• /
• pp.827-836
• /
• 2002

이동 객체 관리 시스템은 사람, 동물, 자동차 등과 같이 시간에 따라 위치를 변경하는 시공간 데이터를 관리한다. 이러한 이동 객체 관리 시스템은 차량 위치 추적, 디지털 전장, 위치 기반 서비스 등에 적용된다. 그러나 기존의 이동 객체 관리 시스템은 이동 객체의 과거 및 미래의 위치정보를 개별적으로 관리하며, 불확실한 과거 및 미래의 위치 추정 방법을 구체적으로 제시하지 못한다. 따라서 이 논문에서는 이동 객체의 이력 정보를 관리할 뿐만 아니라, 데이터베이스에 저장된 이력정보를 이용한 이동 객체의 과거 및 미래의 위치 추정이 가능한 시스템을 제안한다. 이를 위해 차량 위치 추적을 위한 이동 객체를 모델링하고 이동 객체 데이터베이스 구조를 제시한다. 아울러 제안 시스템의 실행 모델을 제시하고, 이를 차량 추적을 위한 가상 시나리오에 적용한다.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.25-47
• /
• 2020

A study of the wave conditions for the Asabo offshore location at the Qua Iboe oil field in Eastern Nigeria has been carried out. Statistical analysis was applied to three (3) years of data comprising spectral periods, Tp and significant wave heights, H_s. The data was divided into two (2); data from October to April represents one set of data and data from May to September represents another set of data. The results were compared with similar studies at other locations offshore of West Africa. It was found that there is an absence of direct swellwaves from the Southern Ocean reaching the location under study (the Asabo site). This work suggests that the wave system is largely emanating from the North Atlantic storms. The presence of numerous islands near the Asabo location shields the site from effects of storms from south west and therefore swells from the Southern Ocean. It is noted that the local wind has little or no contribution. An H_s maximum of 2 m is noted at the Asabo offshore location. It is found that the Weibull distribution best describes the wave distribution at Asabo. Thus, the Weibull distribution is suggested to be adequate for long term prediction of extreme waves needed for offshore design and operations at this location.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1766-1768
• /
• 2004

This paper describes the prediction of location of PD signals in GIS using the difference in the measured time between first and second wave arrival by the external-type PD sensors. It is well accepted that the electromagnetic wave in GIS propagates at the velocity of $3{\times}10^8$m/s. Consequently, we could identify the location of PD with high accuracy. The experience at the fields and the problems for the judgment are also discussed in detail.

• 한국멀티미디어학회논문지
• /
• 제15권12호
• /
• pp.1506-1516
• /
• 2012

In a ship block logistics application, acquisition of locations is required in order to identify location of the ship blocks. A Smart device equipped with a GPS sensor can be used as a mobile client for a ship block logistics application. However the precision of GPS components on a commercial smart device is not high enough. Therefore, using the GPS for localization may produce significant positioning errors in a ship block logistics system. This paper proposes a method to reduce errors in measuring locations using a smart device. Based on the knowledge of how the location information is used in a ship block logistics application, and the predictability of the client's moving line based on geographical layout of a shipyard area, our proposed technique enables a better prediction of the ship blocks location. Performance evaluation shows that the proposed technique can significantly reduce the positional error.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1185-1192
• /
• 2003

Governing parameters for determination of the location of crack initiation and direction of crack initiation were investigated by performing fretting fatigue tests and analysis on Al 2024-T351. Fatigue tests were carried out using biaxial fatigue machine. It was shown that the dominant fatigue crack tended to initiate at the outer edge of one of the four bridge pads, growing at an angle beneath a pad, before turning perpendicular to the orientation of the axial load. Distribution of stresses generated during fretting fatigue loading along the interface was calculated by elastic FE simulation. It can be known that the location of crack initiation can be predicted by using the maximum tangential stress range. Futhermore, the crack initiation direction can also be predicted by a maximum tangential stress range.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.545-550
• /
• 2011

Trilateration is a typical method to locate an object, which requires inherently at least three prerecognized reference points. In some cases, owing to out of reachability to communication facilities the target node cannot be reachable always to three base stations. This paper presents a predictive method, which can identify the location of a moving target node in real time even though the target node could not get in touch with all three base stations. The method is based on the PIDcontrolled Moving Objects Spatio-Temporal Model Algorithm. Simulation results verify that this method can predict the moving direction of a moving target, and then combine with its past position information to judge accurately the location.