• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.717-728
• /
• 2007

The purpose of this study is to suggest hospital clothing design which reflects ubiquitous info-communications technology as changing hospital environment in the information-oriented era of the 21st century. The methods of this study are documentary research of previous studies, observation research and deep interviews. Seoul national university hospital is selected as a target of observation for this study. Doctors, nurses, pharmacists, and patients who are the representative jobs in the hospital are interviewed from on July, 13, 2006 to on August, 1, 2006. According to observation research, the computers, OCR, and PACS are applied from registration to dosage through all courses of diagnosis. However, the most inconvenient problems to patients are the location of medical offices and confusion of reservation. Also, the needs and inconveniences of doctors, nurses, pharmacists, and patients are almost solved by using RFID technology as a result of deep interviews. They prefer wearing devices as an accessory to wearing devices as a clothing directly. In conclusion, suggested UFC design for hospital clothing with info-communications technology promotes efficiency, accuracy, convenience of work to medical personnel in changing hospital environment as the flow of the information-oriented era of the 21st century.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.679-691
• /
• 2020

In the future, 5G technology will become the core infrastructure driving the 4th industrial era. For intelligent super-convergence service, it will be necessary to collect various personal information such as location data. If a person's high-precision location information is exposed by a malicious person, it can be a serious privacy risk. In the past, various approaches have been researched through encryption and obfuscation to protect location information privacy. In this paper, we proposed a new technique that enables statistical query and data analysis without exposing location information. The proposed method does not allow the original to be re-identified through polynomial-based transform processing. In addition, since the quality of the original data is not compromised, the usability of positioning big data can be maximized.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.71-76
• /
• 2019

Research on indoor location tracking technology using smartphone is actively being carried out. Especially, the movement distance of the smartphone should be accurately measured and the movement route of the user should be displayed on the map. Location tracking technology using sensors mounted on smart phones has been used for a long time, but accuracy is not good enough to measure the moving distance of the user using only the sensor. Therefore, when the user moves the smartphone in a certain posture, it must research and develop an appropriate algorithm to measure the distance accurately. In this paper, we propose a method to reduce moving distance estimation error by removing user 's foot shape by limiting the screen of smartphone in pyramid - based optical flow estimation method.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.11-26
• /
• 1997

The purpose of this study is to analyze the locational characteristics of bank branch offices in Kangnam-Gu, Seoul by using Geographic Information System. The number of bank branch offices have sharply increased due to financial liberalization, while the scale of them is getting smaller. The procedure of this research has four steps. First, the spatial distribution of bank branch offices in Seoul is analyzed by the places and time. Second, the spatial variations of bank offices in dong districts of Seoul is explained by factor analysis and multiple regression analysis. Third, the location-allocation model which is embedded within network module in Arc/Info is applied in order to find out optimal location of bank offices in Kangnam-Gu. Finally, the grid module is used in creating the potential surface map for locational sites of new bank branch offices The factors to affect the location of the bank offices contain mainly economic variables including local tax, collUl1ercial area, total establismnent and total employment. The actual locational pattern of bank offices is similar to the idealized locational pattern proposed by the function of min-distance in location-allocation models. In conclusion, this study shows that spatial analysis functions may potentially be improved using GIS technologies. However in order to analyze the location of bank offices more precisely, it should be found out the way to collect more appropriate data, construct computerized base maps, and investigate consumer behaviour and behavioural characteristics of bank themselves..

• Journal of Korean Society of Rural Planning
• /
• v.9 no.4 s.21
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.123-128
• /
• 2007

SPWPM traditional software development is surveyed and essential problems are investigated on the basis of system wireless link considerations. This paper presents the current state software planning tools for wireless LAN link optimization. The software directory is based on combination of MatLab and MapInfo software and measurement which gives the best grouping parameters to build up the software development. Among the requirements assumed, the WLAN site selections must be Line-of-sight (LOS) or near line of sight (NLOS) field strength prediction for either point to point or point to multi points. The results obtainable the out put of the program include two-dimensional (2D) and three dimensional (3D) plots for creating the link; design parameters through GUI representing the height and location for each antenna is depending on K-factor of the area and transmit antenna location.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.233-244
• /
• 2021

Recently, several ICT-based cat studies have produced some successful results, according to academic and industry sources. However, research on the level of simply identifying the cat's condition, such as the behavior and sound classification of cats based on images and sound signals, has yet to be found. In this paper, based on the veterinary scientific knowledge of cats, a practical and academic cat monitoring and disease diagnosis system is proposed to monitor the health status of the cat 24 hours a day by automatically categorizing and analyzing the behavior of the cat with location information using LSTM with a beacon sensor and a raspberry pie that can be built at low cost. Validity of the proposed system is verified through experimentation with cats in actual custody (the accuracy of the cat behavior classification and location identification was 96.3% and 92.7% on average, respectively). Furthermore, a rule-based disease analysis system based on the veterinary knowledge was designed and implemented so that owners can check whether or not the cats have diseases at home (or can be used as an auxiliary tool for diagnosis by a pet veterinarian).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.127-128
• /
• 2016

본 연구는 자동차가 갑자기 고장이 나거나 사고가 났을 때 스마트폰 어플리케이션을 이용해 현 사고지점 위치정보를 사용자에 의해 서버에 전송하고, 휴대폰에 내장된 GPS 모듈 및 Bluetooth를 이용하여 삼각대에 부착된 Bluetooth와 연결하여 자동으로 서버에서 현 사고지점 위치정보를 받아들여 분석할 수 있는 시스템에 관한 것이다. 서버에는 사용자에 의해 등록되어진 현 사고지점의 위치정보, 사고다발지역을 분석하고 관리하는 시스템을 구축한다. 이 시스템을 활용하면 운행 중 사고지점의 정보를 실시간으로 활용할 수 있어 2차 사고에 대한 예방 및 최적의 운행정보를 감지할 수 있다.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.61-80
• /
• 1997

This study tried to propose the guidelines for the ecological preservation zoning in Korea. So some related laws and regulations were inspected, which were Natural Environment Preservation Act, Nature Park Act, Cultural Asset Conservation Act, Forest Act and Urban Planning Act. In these acts, I could find several concepts related to the ecosystem that are described as the protection area. But there aren't detailed and practical characteristics in those concepts. So for making the practical concept of ecosystem preservation, I considered Multiple Use Module, Wildlife habitat model, and Environmental evaluation model. Thorough this step, the process and methodology was established for evaluating and analysing. The potentiality of the GIS system was inspected. So the TM5 scene of the site was acquired and processed by ER-Mapper, Idrisi, Arc/Info and Arcview. And several digitized data were input by scanning and vecterizing. The Erdas format was mostly exchangeable to any program. The site is the Byonsan Peninsula National Park. The forest stand information and topographic data were digitized, types of which are forest year, DBH, density, slope, aspect etc. And also the watershed boundary, roads and paths, natural and cultural resources were mapped and analysed. Modelling of preservation suitability found the dispersed patterns for the best suitable zone through all the site. And the development potential areas were checked on downwatershed. This patterns are thought to result from the forest location for the wildlife habitat and the low altitude and no-steep slopes for developing. And Early warning system concept was introduced by overlapping these two patterns on the both potential area. As the conclusions, I proposed that the preservation zone be assigned according to the watershed unit as the main ecosystem zone. This main area should be linked by the eco-corridor through the point type eco-system. Finally, I thought the comprehensive information system should be established for making the rational and efficient decision making in natural area.