• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1457-1460
• /
• 2019

In this paper, we proposed the development of a mixed sensor parts for integrated radiation exposure protection fireman's life-saving alarm that can be location-tracked and irradiated. To measure radiation exposure dose, we use the PIN-Diode radiation measurement sensor module, a semi-conductive radiation measurement sensor that can minimize size and weight. The design for removing leakage current is carried out to enhance the characteristics of the radiation measurement sensor using PIN-Diode. The IMU sensor module is used to estimate the location of the current fireman at the same time as the accident estimate by adding together the data and the values for acceleration on the three axis. Experiments were conductied by an authorized testing agency to determine the efficiency of the proposed mixed sensor parts for integrated radiation exposure protection fireman's life-saving alarms. The cumulative dose measurement range was measured in the range of 10 μSv to 10 mSv, the highest level in the world. The accuracy was measured from ±6.3% to ±9.0% (137 Cs) and normal operation was found at the international standard of ±15%. In addition, positional accuracy was measured within ±10%, resulting in a high level of results, demonstrating its effectiveness. Therefore, it is expected that more firemen will be able to provide with superior performance integrated radiation exposure protection fireman life-saving alarm.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2001.10a
• /
• pp.61-86
• /
• 2001

All cancers are caused by abnormalities in DNA sequence. Throughout life, the DNA in human cells is exposed to mutagens and suffers mistakes in replication, resulting in progressive, subtle changes in the DNA sequence in each cell. Since the development of conventional and molecular cytogenetic methods to the analysis of chromosomal aberrations in cancers, more than 1,800 recurring chromosomal breakpoints have been identified. These breakpoints and regions of nonrandom copy number changes typically point to the location of genes involved in cancer initiation and progression. With the introduction of molecular cytogenetic methodologies based on fluorescence in situ hybridization (FISH), namely, comparative genomic hybridization (CGH) and multicolor FISH (m-FISH) in carcinomas become susceptible to analysis. Conventional CGH has been widely applied for the detection of genomic imbalances in tumor cells, and used normal metaphase chromosomes as targets for the mapping of copy number changes. However, this limits the mapping of such imbalances to the resolution limit of metaphase chromosomes (usually 10 to 20 Mb). Efforts to increase this resolution have led to the "new"concept of genomic DNA chip (1 to 2 Mb), whereby the chromosomal target is replaced with cloned DNA immobilized on such as glass slides. The resulting resolution then depends on the size of the immobilized DNA fragments. We have completed the first draft of its Korean Genome Project. The project proceeded by end sequencing inserts from a library of 96,768 bacterial artificial chromosomes (BACs) containing genomic DNA fragments from Korean ethnicity. The sequenced BAC ends were then compared to the Human Genome Project′s publicly available sequence database and aligned according to known cancer gene sequences. These BAC clones were biotinylated by nick translation, hybridized to cytogenetic preparations of metaphase cells, and detected with fluorescein-conjugated avidin. Only locations of unique or low-copy Portions of the clone are identified, because high-copy interspersed repetitive sequences in the probe were suppressed by the addition of unlabelled Cotl DNA. Banding patterns were produced using DAPI. By this means, every BAC fragment has been matched to its appropriate chromosomal location. We have placed 86 (156 BAC clones) cytogenetically defined landmarks to help with the characterization of known cancer genes. Microarray techniques would be applied in CGH by replacement of metaphase chromosome to arrayed BAC confirming in oncogene and tumor suppressor gene: and an array BAC clones from the collection is used to perform a genome-wide scan for segmental aneuploidy by array-CGH. Therefore, the genomic DNA chip (arrayed BAC) will be undoubtedly provide accurate diagnosis of deletions, duplication, insertions and rearrangements of genomic material related to various human phenotypes, including neoplasias. And our tumor markers based on genetic abnormalities of cancer would be identified and contribute to the screening of the stage of cancers and/or hereditary diseases

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.46-50
• /
• 2005

Purpose: The purpose of this study is to evaluate the accuracy of magnetic resonance imaging (MRI) in the diagnosis of acute anterior cruciate ligament (ACL) injury and its tear pattern in comparison with arthroscopic finding. Materials and Methods: Sixty consecutive patients with acute ACL injury were taken NRI followed by arthroscopic examination between January 2002 and June 2004. MRI findings were reviewed according to the presence of ACL discontinuity, diffuse swelling or thickening, focal edema, collapse on distal end, and any combined tear. The pathologic findings were then confirmed arthroscopically. The diagnostic accuracy of MRI on ACL tear pattern was analyzed by obtaining its positive predictive value. Results: All fifty two cases with presence of discontinuity on MRI showed ACL rupture arthroscopically. The location of ACL tear, diffuse swelling and focal edema on MRI also corresponded with arthroscopic findings respectively. However, the diagnostic accuracy of MRI was relatively lower in the presence of other ACL patterns such as collapses and combined tear. Conclusion: Preoperative MRI findings seem to be in accordance with arthroscopic findings and is significantly accurate in detection of location and diffuse swelling and focal edema of ACL tear.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.546-554
• /
• 2019

Typically, closed-circuit television (CCTV) monitoring is mainly used for post-processes (i.e. to provide evidence after an incident has occurred), but by using a streaming video feed, machine-based learning, and advanced image recognition techniques, current technology can be extended to respond to crimes or reports of missing persons in real time. The multi-CCTV cooperation technique developed in this study is a program model that delivers similarity information about a suspect (or moving object) extracted via CCTV at one location and sent to a monitoring agent to track the selected suspect or object when he, she, or it moves out of range to another CCTV camera. To improve the operating efficiency of local government CCTV control centers, we describe here the partial automation of a CCTV control system that currently relies upon monitoring by human agents. We envisage an integrated crime prevention service, which incorporates the cooperative CCTV network suggested in this study and that can easily be experienced by citizens in ways such as determining a precise individual location in real time and providing a crime prevention service linked to smartphones and/or crime prevention/safety information.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.43-51
• /
• 2011

The recent development of the technology for wireless mobile computing and applied technology for location-based services has made it possible to support query processing faster than that in the past. However, some technological limitations on hardware and software still exist. The most critical aspects of query processing are accuracy and speed. For improving the accuracy, it is required that detailed information on the data involved in query processing be saved. In this case, the amount of information on the data increases, which decreases the speed. On the other hand, for increasing the speed, it is necessary to reduce the broadcast cycle, which enables rapid data acquisition as desired. In this case, because of insufficient index information, the listen time for the client increases, which may cause unnecessary energy consumption. Therefore, a trade-off occurs between the accuracy and speed. This paper proposes a hierarchical bitmap-based spatial index (HBI) as a solution for the aforementioned problems. HBI describes an object with 0 and 1 on the Hilbert curve map. It reduces the broadcast cycle by decreasing the index size on the basis of bit information and tree structure. Therefore, it is able to shorten the listen time and query processing time. In addition, HBI enables the detection of the locations of all the objects so that it is possible selectively listen to a broadcast. A performance evaluation of the proposed technique demonstrates that it is excellent.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.253-258
• /
• 2016

This paper proposes a method that utilizes optimization approach for localization of an indoor mobile robot. Bayesian filters which have been widely used for localization of a mobile robot use many control parameters to take the uncertainties in measurement and environment into account. The estimation performance depends on the selection of these parameter values. Also, the performance of the Bayesian filters deteriorate as the non-linearity of the motion and measurement increases. On the other hand, the optimization approach uses fewer control parameters and is less influenced by the non-linearity than the Bayesian methods. This paper compares the localization performance of the proposed method with the performance of the extended Kalman filter to verify the feasibility of the proposed method. Measurements of ranges from beacons of ultrasonic satellite to the robot are used for localization. Mahalanobis distance is used for detection and rejection of outlier in the measurements. The optimization method sets performance index as a function of the measured range values, and finds the optimized estimation of the location through iteration. The method can improve the localization performance and reduce the computation time in corporation with Bayesian filter which provides proper initial location for the iteration.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.139-145
• /
• 2009

Recently P2P (Peer-to-Peer) networks and applications have been expanded to various field. However, because the construction of P2P network did not influence a underlying network topology or property, it may be inefficient. Especially, this inefficiency is more serious in MANET because MANET has narrow bandwidth and energy constraint. When we use a proactive routing protocol in MANET, we can know hop counts between two nodes. And, we can construct a P2P overlay network using this hop count information. However, In case of using hop count only, we can avoid a interference path selection problem and a zig-zag problem. We propose a method of improving P2P contents distribution using virtual positions. We calculate virtual positions from hop counts using the trigonometry. This method solves a interference path selection problem and a zig-zag problem. This method also allows a P2P network to influence underlying network topology. We adopt this method to a network which uses a virtual geographic routing, a proactive routing protocol, or a reactive routing protocol. We show that our proposed methods improve P2P contents distribution performance over MANET through a simulation.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.101-116
• /
• 1995

The fact that the demands on traffic data collection are imposed by economic and safety considerations raisese the question of the potential for complementing existing traffic data collection programs with satellite data. Evaluating and monitoring traffic characteristics is becoming increasingly important as worsening congestion, declining economic situations, and increasing environmental sensitivies are forcing the government and municipalities to make better use of existing roadway capacities. The present system of using automatic counters at selected points on highways works well from a temporal point of view (i.e., during a specific period of time at one location). However, the present system does not cover the spatial aspects of the entire road system (i.e., for every location during specific periods of time); the counters are employed only at points and only on selected highways. This lack of spatial coverage is due, in part, to the cost of the automatic counters systems (fixed procurement and maintenance costs) and of the personal required to deploy them. The current procedure is believed to work fairly well in the aggregate mode, at the macro level. However, at micro level, the numbers are more suspect. In addition, the statistics only work when assuming a certain homogenity among characteristics of highways in the same class, an assumption that is impossible to test whn little or no data is gathered on many of the highways for a given class. In this paper, a remote sensing system as complement of the existing system is considered and implemented. Since satellite imagery with high resolution is not available, digitized panchromatic imagery acquired from an aircraft platform is utilized for initial test of the feasibility and performance capability of remote sensing data. Different levels of imagery resolutions are evaluated in an attempt to determine what vehicle types could be classified and counted against a background of pavement types, which might be expected in panchromatic satellite imagery. The results of a systematic study with three different levels of resolutions (1m, 2m and 4m) show that the panchromat ic reflectances of vehicles and pavements would be distributed so similarly that it would be difficult to classify systematically and analytically remotely sensing vehicles on pavement within panchromatic range. Anaysis of the aerial photographs show that the shadows of the vehicles could be a cue for vehicle detection.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.487-497
• /
• 2021

The purpose of this study is to identify factors affecting length of stay(LOS) and death in tuberculosis(TB) patients by disease type, patient characteristic, admission and disease characteristic, and hospital characteristic from 2008 to 2017. Survey data was using Korean national hospital discharge in-depth survey data produced by Korea Disease Control and Prevention Agency. Study subjects were 10,634 inpatients with TB(A15, A16, A17, A18, A19, U88.0, U88.1, U84.30, U84.31) and analyzed frequency, chi-square test, Fisher's exact test, and logistic regression by using STATA 13.0. As a study result, the type of TB(extrapulmonary TB, multidrug-resistant TB, extensively drug-resistant TB), sex(woman), age(35-49, 50-64, 65-74, 75 years old or older), admission type(outpatient department), CCI(1-2 point, 3 point over), hospital location(metropolitan city) and bed size(300-499, 500-999, over 1000) were significantly influence LOS. Also, the type of TB(extrapulmonary TB, extensively drug-resistant TB), sex(woman), age(50-64, 65-74, 75 years old or older), residence(small town/rural), admission type(outpatient department), CCI(1-2 point, 3 point over), hospital location(provincial) were significantly influence death. In conclusion, the existing tuberculosis management has been patient management with rapid diagnosis and treatment following early detection. But other studies should be carried out for the system that identifies and supports high-risk groups of the long-term length of stay in hospital or high mortality rates as a result of treatment.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.429-435
• /
• 2021

In intracavitary radiotherapy, incorrect location of the source can cause excessive dose to normal tissue, so it is essential to evaluate the location accuracy of the source. In this study, basic research was performed on digital line dosimeter based on lead (II) oxide (PbO) to improve analog verification method. Therefore, a polycrystalline PbO unit cell dosimeter was manufactured and the measurement performance for Ir-192 sources was evaluated. As a result, the reproducibility satisfies the evaluation criteria of 1.5% with a relative standard deviation of 0.85%. Linearity showed excellent results with a linear coefficient of R² of 0.9998. In the case of distance dependence evaluation, the power function R² showed 0.9855 for PbO and 0.9974 for diode, and the overall average difference was 1.66% for PbO and 2.18% for diode. This study presents the basic detection performance of the polycrystalline PbO dosimeter for the Ir-192 source and can provide basic data in the field of radiation measurement.