• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.677-686
• /
• 2016

A thermal power plant is the first CFBC (Circulating Fluidized Bed Combustion) power plant consisting of 2 boilers-1 turbine. The optimal height of a stack needs to be approximately 156 meters in the case of this thermal power plant; however, the thermal power plant sites satisfy a function and reduce the construction cost by using mountains in the sites after cutting the ground and locating an integrated office and chimney at an altitude of 70 meters thereby lowering the height of the stack to 86 meters. In addition, the integrated office, which has a combined stack style with a unique design, is constructed by connecting with 2 stacks and disposing the office and an observatory in the space between them. Therefore, this study examined the design concept that fulfils the structural, functional, and aesthetic factors, harmoniously by joining the integrated office and the stack, which are disparate, and investigated special construction methods (Slip Form, Steel Inner Flue & Lift-up) through which heterogeneous architectures are structurally, functionally, and aesthetically constructed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.71-79
• /
• 2008

High voltage distribution lines in the electric railway system placed according track with communication lines and signal equipments. Case of the over head lines is occurrence the many fault because lightning, rainstorm, damage from the sea wind and so on. According this fault caused protection device to wrong operation. One line ground fault that occurs most frequently in railway high voltage distribution lines and sort of faults is line short, three line ground breaking of a wire, and so on. For this reason we need precise maintenance for prevent of the faults. The most important is early detection and fast restoration in time of fault for a safety transit. In order to develop an advanced fault location device for 22.9[kV] distribution power network in electric railway system this paper deals with new fault locating algorithm using flow technique which enable to determine the location of the fault accurately. To demonstrate its superiorities, the case studies with the algorithm and the fault analysis using PSCAD/EMTDC (Power System Computer Aided Design/Electro Magnetic Transients DC Analysis Program) were carried out with the models of direct-grounded 22.9[kV] distribution network which is supposed to be the grounding method for electric railway system in Korea.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.245-254
• /
• 2002

IC package marking inspection system using machine vision locates and identifies the target elements from input image, and decides the quality of marking by comparing the extracted target elements with the standard patterns. This paper proposes an adaptive multi-level thresholding (AMLT) method which is suitable for a series of operations such as locating the target IC package, extracting the characters, and detecting the Pinl dimple. It also proposes a dynamic matching unit selection (DMUS) method which is robust to noises as well as effective to catch out the local marking errors. The main idea of the AMLT method is to restrict the inputs of Otsu's thresholding algorithm within a specified area and a partial range of gray values. Doing so, it can adapt to the specific domain. The DMUS method dynamically selects the matching unit according to the result of character extraction and layout analysis. Therefore, in spite of the various erroneous situation occurred in the process of character extraction and layout analysis, it can select minimal matching unit in any environment. In an experiment with 280 IC package images of eight types, the correct extracting rate of IC package and Pinl dimple was 100% and the correct decision rate of marking quality was 98.8%. This result shows that the proposed methods are effective to IC package marking inspection.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.86-100
• /
• 2014

The purposes of this study are to provide a guideline for the suitability of wind farm facilities in forest lands and to suggest improvement plans of policies and systems to minimize the damage of forest lands. First, we implemented a literature review and field surveys to examine and select factors for the suitability of wind farm facilities in forest lands. Spatial database for selected location factors of wind farm facilities in forest lands was constructed to develop the suitability model for locating wind farm facilities focusing on Gangwon-do. Data used in this study include wind power resource, legal mountainous preserved area, forest roads, developed areas, forest class, and other spatial data. In order to find specific-sized potential areas for a certain number of wind farm turbines, we used block statistics and focal statistics methods. As a result, the areas for potential wind farm locations were 1,261ha from a block statistics method and 1,411ha from a focal statistics method. Based on the outputs of this research, it is required to make an urgent solution for the prevention of forest disaster and to prepare reduction measures for the destruction of ridge landscape.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.327-337
• /
• 2017

The purpose of this study is to investigate patient satisfaction for the spacial environment of the rehabilitative facilities, and by this to examine areas of patients' needs to develop patient-friendly improvement in spacial environment. 308 patients were surveyed at physical therapy centers of 6 hospitals or rehabilitative institutions in Daejeon with patient satisfaction questionnaire. The spatial environment satisfaction was categorized into 7 constructs and the data were statistically analyzed and compared by t-test and ANOVA according to the patient characteristics. As a result, inter-floor transfer was found to be the area with the least satisfaction, especially in the in-patient group. Locating floor level was the second lowest satisfied construct. Comfort was relatively highly satisfied construct overall, but patients with neurological disease had less satisfaction than with musculoskeletal disease. Patients in 20's were less satisfied in wayfinding than 60's. Satisfaction for interior design was lower in subject in 50's than 70's. These findings can be used as evidences to improve spacial environment design for rehabilitative facilities to the better patient satisfaction.

• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.77-93
• /
• 2015

The idea of using measured dynamic characteristics for damage detection is attractive because it allows for a global evaluation of the structural health and condition. However, vibration-based damage detection for complex structures such as long-span cable-supported bridges still remains a challenge. As a suspension or cable-stayed bridge involves in general thousands of structural components, the conventional damage detection methods based on model updating and/or parameter identification might result in ill-conditioning and non-uniqueness in the solution of inverse problems. Alternatively, methods that utilize, to the utmost extent, information from forward problems and avoid direct solution to inverse problems would be more suitable for vibration-based damage detection of long-span cable-supported bridges. The auto-associative neural network (ANN) technique and the probabilistic neural network (PNN) technique, that both eschew inverse problems, have been proposed for identifying and locating damage in suspension and cable-stayed bridges. Without the help of a structural model, ANNs with appropriate configuration can be trained using only the measured modal frequencies from healthy structure under varying environmental conditions, and a new set of modal frequency data acquired from an unknown state of the structure is then fed into the trained ANNs for damage presence identification. With the help of a structural model, PNNs can be configured using the relative changes of modal frequencies before and after damage by assuming damage at different locations, and then the measured modal frequencies from the structure can be presented to locate the damage. However, such formulated ANNs and PNNs may still be incompetent to identify damage occurring at the deck members of a cable-supported bridge because of very low modal sensitivity to the damage. The present study endeavors to enhance the damage identification capability of ANNs and PNNs when being applied for identification of damage incurred at deck members. Effort is first made to construct combined modal parameters which are synthesized from measured modal frequencies and modal shape components to train ANNs for damage alarming. With the purpose of improving identification accuracy, effort is then made to configure PNNs for damage localization by adapting the smoothing parameter in the Bayesian classifier to different values for different pattern classes. The performance of the ANNs with their input being modal frequencies and the combined modal parameters respectively and the PNNs with constant and adaptive smoothing parameters respectively is evaluated through simulation studies of identifying damage inflicted on different deck members of the double-deck suspension Tsing Ma Bridge.

• The Korean Journal of Zoology
• /
• v.12 no.1
• /
• pp.22-28
• /
• 1969

In order to see if any suppressor system for the SD action was involved in natural populations of D. melanogaster samples from the populations of nine localities in Korea, Choonchun, Yusoo, Namhai, Shinchon(Seoul), Kwangjoo(Kyunggi), Koonsan, Kwangjoo(Chunnam), Jejoo and Pusan were analyzed by using the mating scheme for locating the suppressor on chromosome pairs. And also two kinds of recombinant SD lines R-1, the American line and $R(SD^NH -1)-1$, the Japanese one were used in order to see any difference of the response of the suppressor for differently originated SD. The results of the experiment are given below. (1) The suppressor system was involved in all lines of natural populations from nine localities of Korea. (2) Most of the suppressors were found to be located on the X chromosome and only a few lines from three populations showed to carry the suppressors on the second chromosome and on the third or fourth chromosoem. (3) The response of the suppressor for differently originated SD lines showed no significant difference.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.2
• /
• pp.261-281
• /
• 2004

The location of auto industry in Jeon-buk is due to the strategies for secure a low-priced industrial site of the auto assembly companies, which attained to quantitative growth stage in the early part 1990's, and the regional balanced development policy by the location of leader enterprise of the government. As a consequence of the reversal development pattern that is located the auto parts firm after locating the auto assembly companies, the Jeon-buk auto industry has many structural vulnerability. First, because of the lack development of auto parts industries, the auto assembly companies located in Jeon-buk are dependent many auto parts at a external region. Second, most of auto parts firm belongs to the singular assembly company exclusively. And the majority of auto parts industries are the low value-added products that are necessary a simple labor power. Third, the agglomeration undeveloped of associated industries with automobile caused a low competitiveness of invitation a manufacturing company as against other provinces. For a regional economic development by the auto industry, it is necessary a flexible regional structure of production through an agglomeration of associated industries. The geographical proximity between an assembly company and a parts firms is an important locational factor with the induction of Just-in-Time production system and a modularization in the auto industry. And a modularization applies to more new factory than the existing factories. So that, Jeon-buk self-government has to create an amicable industrial environment, try to attract an auto parts enterprises and plan an agglomerated industrial complex that is able to supply a parts modulated to assembly company.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Clinical and Experimental Reproductive Medicine
• /
• v.10 no.1
• /
• pp.7-24
• /
• 1983

On the basis of the semen analysis in 66 subjects, they were divided into six different groups: Group I consisted of 16 normal subjects with sperm counts of over 40 ${\times}10^6$/ml and motility of over 40 percent, Group II, 7 subjects with normal sperm counts, but motility of under 40 percent, Group III, 15 oligospermic patients with under 40 ${\times}10^6$/ml, Group IV 14 azoospermic patients, Group V, 10 patients with vasectomy and Group VI, 4 abnormal patients with 2 cases of hypoplastic testis, 1 case of Klinefelter's syndrome and 1 case of testis tumor. After seperation of semen into sperm and seminal plasma by centrifugation, the protein contents and the activities of hyaluronidase, ${\beta}$-N acetylglucosaminidase, ${\beta}$-glucuronidase, arylsulfatase, acrosin and azocoll proteinase in seminal plasma were measured. Vasectomy group has 30 percent less of total protein than normal group. For the comparison of enzyme activities of seminal plasma, it could be assumed that the enzymes in seminal plasma were not contaminated with the enzymes of spermatozoa by testing the enzymes of the seminal plasma from the vasectomy and azoospermic groups. It had been reported that hyaluronidase was only released from spermatozoa, however, the result obtained in this investigation showed that azoospermic and vasectomy group had high specific activities of hyaluronidase. The results indicated that hyaluronidase was not only from the testis but also from the male accessory sexual glands. Oligospermic group (Group III) showed the lowest total activity of hyaluronidase among them. The specific activities of ${\beta}$ -N-acetylglucosaminidase was high in oligospermic group (Group III) and low in vasectomy group (Group V). These results were contradictory with the pattern of hyaluronidase activities. This indicated that the spermatozoa which were stayed in epididymis would increase the activity of this enzyme. The specific activity of ${\beta}$ - glucuronidase was low in oligospermic and vasectomy groups. Group VI including testis tumor had remarkably high arylsulfatase activity. Arylsulfatase, a typical lysosomal enzyme, has been known to be released unusually large amounts from certain tumor cells. Arylsulfatase was also released with high activities from azoospermic and vascetomy group. This result indicated that this enzyme was also released from the sources other than testis. Acrosin, a proteolytic enzyme locating in the sperm acrosome, was not found throughout all the samples of seminal plasma. The activities of azocoll proteinase, a non-specific neutral proteinase was nearly identical in all the groups. This enzyme must have been released from the sources other than testis.