• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.490-500
• /
• 1988

In recent years the acquisition, processing and interpretation of three dimensional seisimic data, for the purpose of locating gas and reservoirs, have become practical. This paper exlores one way in which the volume data can be searched and visualized, which may aid the interpreter. The illusion of looking at a three dimensional volume can be obrained by fusing a stereoscopic pair of pictures. Each picture can be made by projecting each data point of the volume into a plane from a point where the eye is placed. The data valuse along any projection line can be summed to form the picture, or only a segment along the line can be selected. By selective projection, the volume can be searched and obscuring layers removed. The stereoscopic pictures show the physical models in there ture spatial positions. Projection of the envelope function of the seismic traces is shown to give improved depth perception compared with projection of the position amplitudes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.455-464
• /
• 2006

In multi-regional mobile agent computing environments, spatial replication-based approach may be used as a representative mobile agent fault-tolerance technique because it allows agent execution to make progress without blocking even in case of agent failures. However, to apply this approach to real mobile agent-based computing systems, it is essential to minimize the overhead of locating and managing mobile agents replicated on each stage. This paper presents a new mobile agent location management protocol SRLM to solve this problem. The proposed protocol allows only the primary among all the replicated workers of each stage to register with its regional server and then, significantly reduces its location updating and message delivery overheads compared with the previous protocols. Also, the protocol addresses the location management problem incurred by electing the new primary among the remaining workers at a stage in case of the primary worker's failure.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.105-114
• /
• 2007

In sensor network processing environments, current location tracking methods have problems in accuracy on receiving the transmitted data and pinpointing the exact locations depending on the applied methods, and also have limitations on decision making and monitoring the situations because of the lack of considering context-awareness. In order to overcome such limitations, we proposed a method which utilized context-awareness in a data processing module which tracks a location of the magnetic object(Magnetic Line Tracer) and controlled introspection data based on magnetic sensor. Also, in order to prove its effectiveness we have built a wireless sensor network test-bed and conducted various location tracking experiments of line tracer using the data and resulted in processing of context-aware data. Using the new data, we have analyzed the effectiveness of the proposed method for locating the information database entries and for controlling the route of line tracer depending on context-awareness.

• The KIPS Transactions:PartA
• /
• v.19A no.2
• /
• pp.85-92
• /
• 2012

In this paper, a highly scalable real-time locating system which can measure location of fast moving targets is proposed. Within the system, the location service area is partitioned into grids with squares which is referred to as a macro-cell. Also, a macro-cell is further partitioned into $N{\times}N$ micro-cells. In a micro-cell, location reference nodes are placed on every vertex and an arbitration node is placed on the center. When a mobile node tries to measure its location, it should first communicate with the arbitration nodes for granting location measurement operation. Therefore, within a micro-cell, only one granted mobile node can calculate its location by a series of communication with location reference nodes. To evaluate performance of the proposed system, the system is modeled and simulated. The simulation result shows that the proposed system requires small communication time for location measurement operation and produces small location calculation error for fast moving targets.

• The Korean Journal of Pain
• /
• v.23 no.4
• /
• pp.242-246
• /
• 2010

Background: The first sacral nerve root block (S1NRB) is a common procedure in pain clinic for patients complaining of low back pain with radiating pain. It can be performed in the office based setting without C-arm. The previously suggested method of locating the needle entry point begins with identifying the posterior superior iliac spine (PSIS). Then a line is drawn between two points, one of which is 1.5 cm medical to the PSIS, and the other of which is 1.5 cm lateral and cephalad to the ipsilateral cornu. After that, one point on the line, which is 1.5 cm cephalad to the level of the PSIS, is considered as the needle entry point. The purpose of this study was to analyze the location of needle entry point and palpated PSIS in S1NRB. Methods: Fifty patients undergoing C-arm guided S1NRB in the prone position were examined. The surface anatomical relationships between the palpated PSIS and the needle entry point were assessed. Results: The analysis revealed that the transverse and vertical distance between the needle entry point and PSIS were $28.7{\pm}8.8mm$ medially and $3.5{\pm}14.0mm$ caudally, respectively. The transverse distance was $27.8{\pm}8.3mm$ medially for male and $29.5{\pm}9.3mm$ medially for female. The vertical distance was $1.0{\pm}14.1mm$ cranially for male and $8.1{\pm}12.7mm$ caudally for female. Conclusions: The needle entry point in S1NRB is located on the same line or in the caudal direction from the PSIS in a considerable number of cases. Therefore previous recommended methods cannot be applied to many cases.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.287-294
• /
• 2017

This study attempted to develop a beacon scanner based ward monitoring service in order to respond to the new paradigm of medical environment which is trying to introduce ICT technology as medical service to track and manage the spread path of large infectious diseases such as MERS. The study also included beacon hardware development, firmware development for the beacon low-power bluetooth 4.0, and server and web-based dashboard UI development. Using these, we have developed a customized monitoring system that provides functions such as locating patients by location based service and monitoring based on web UI. It is possible to maximize the efficiency of offline hospital services and to value active infection control and patient safety by integrating online technology into the area where online technologies such as beacons are not properly integrated.

• Journal of the Korean Society for information Management
• /
• v.18 no.2
• /
• pp.231-254
• /
• 2001

As contemporary thesauri have become large and complex, it is increasingly difficult to assess the intended meaning of each one of the terms. Thereby the meaning of many descriptors seems to be very similar, and it is often not possible to distinguish among them and to identify the term correctly. Purpose of this article is to induce definitions of descriptors in thesaurus by specifying the characteristics of each concept, locating it in the domain and providing clear and prescriptive information on the meaning of each descriptor in the form of a standardized terminological definition. In this study, a small prototype thesaurus using definition of term in the field of information industry in Korean Standards has been developed. In this thesaurus definitions are written for each descriptor with the help of a proposed defining model and in accordance with defining rules borrowed from the field of terminology. In addition, elements of analyzed definition have been included in the relation structure of descriptors. It is revealed that terminological definition added to thesaurus may permit extraction of separate items of information from definitions for the representation of knowledge structures and makes it easier to confine the scope of descriptors to be included in thesaurus in a given subject field.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.189-198
• /
• 2009

Unstructured peer-to-peer systems are most commonly used in today's internet. But file placement is random in these systems and no correlation exists between peers and their contents. There is no guarantee that flooding queries will find the desired data. In this paper, we propose to cluster nodes in unstructured P2P systems using the agglomerative hierarchical clustering algorithm to improve the search method. We compared the delay time of clustering the nodes between our proposed algorithm and the k-means clustering algorithm. We also simulated the delay time of locating data in a network topology and recorded the overhead of the system using our proposed algorithm, k-means clustering, and without clustering. Simulation results show that the delay time of our proposed algorithm is shorter compared to other methods and resource overhead is also reduced.

• Molecules and Cells
• /
• v.21 no.3
• /
• pp.360-366
• /
• 2006

Up to 35% of the rice genome consists of various kinds of transposons, and CACTA and MITE are two of the major class 2 DNA transposons in the genome. We have employed the consensus sequences of Rim2/Hipa CACTA, Stowaway MITE Pangrangja, and Tourist MITE Ditto for transposon display (TD) analysis to locate them on a genetic map, with 58 SSR markers used to anchor them. The TD analysis produced a high profile of the polymorphisms between the parental lines, Oryza sativa var. Gihobyeo/O. sativa var. Milyang, in intraspecific $F_{15}$ RIL lines, locating 368 markers of Rim2/Hipa CACTA, 78 markers of Tourist MITE Ditto, and 22 markers of Stowaway MITE Pangrangja. In the segregation analysis, non-parental segregating bands and segregation distortion bands were observed. The recombinant genetic map spans 3023.9 cM, with 5.7 cM the average distance between markers. The TD markers were distributed unequally on the chromosomes because many TD markers were located in pericentric chromosomal regions except in the cases of chromosomes 2, 3, 6 and 9. Although the number of transposon markers was not sufficient to include all rice class 2 transposons, the current map of CACTA and MITE transposons should provide new insight into the genome organization of rice since no previous DNA transposon map is available.