• 한국음향학회지
• /
• 제30권5호
• /
• pp.255-264
• /
• 2011

3차원 공간에서 음원으로부터 사람의 귀로 음향적인 전달 과정을 표현하는 머리전달함수는 사람이 음원의 위치를 판단할 수 있는 중요한 정보를 포함하고 있으며, 이를 이용하여 실질적으로는 존재하지 않는 음원을 근사적으로 생성할 수 있다. 그러나 각 청자에 특화되지 않는 머리전달함수를 사용함으로 인해 전후 방향이나 상하 방향의 혼동이 발생하게 되어 음상정위 성능이 저하된다. 이 논문에서는 머리전달함수를 통해 생성된 입체음향을 인간의 청각 특성을 사용하여 개선하는 알고리즘을 제안한다. 머리전달함수가 적용된 사운드 신호의 전역 마스킹 값을 계산한 후, 청자에게 크게 영향을 미치는 주파수 대역만을 추출하여 이를 강조함으로서 각 방향에 해당하는 인지 특성을 부각시키는 방법을 제안하였으며, 제안된 방법의 성능을 청감테스트를 통해 증명하였다.

• Journal of Korean Neurosurgical Society
• /
• 제65권1호
• /
• pp.49-56
• /
• 2022

Objective : Angiolipomas are usually found in the subcutaneous tissue of the trunk and limbs. Spinal angiolipomas (SALs) are uncommon and have rarely been reported. We report a series of nine SALs patients who received surgical treatment in our department. To summarize the clinical characteristics of SALs, propose our surgical strategies, and evaluate the effects of the operation. Methods : This was a retrospective review of nine SALs patients who received surgical treatment from August 2015 to March 2020. Total or subtotal resection was determined by the axial localization (dorsal or ventral) and the extent of intervertebral foramen involvement. The outcomes were assessed based on the modified Japanese Orthopaedic Association (mJOA) scoring system utilized before surgery and at various follow-up points. Results : Among the nine patients, the mean mJOA score before surgery was 6.6±2.3, compared with 10.1±1.1 at the last follow-up time point (33.4±11.8 months). All patients achieved good outcomes, even in cases of subtotal resection. Conclusion : Early surgical resection of SALs is recommended, and the specific procedures should be determined by the axial localization (dorsal or ventral) and the extent of intervertebral foramen involvement. Most of the patients had a good prognosis, even in cases of subtotal resection.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.662-669
• /
• 2017

군용 회전익 항공기는 임무 특성상 피탄 환경에 노출이 많이 되며, 피탄 후 연료누설에 의한 화재는 인명 손실로 직결된다. 피탄 시 조종사 및 승무원 생존성 향상을 위해 회전익 항공기 연료탱크는 내탄 성능과 내 폭발 성능이 요구된다. 내탄 성능은 자기밀폐성 셀을 연료탱크에 적용하여 만족시킬 수 있으며, 내폭발 성능은 폭발가능 영역의 산소 농도를 낮추는 방법과 열에 의한 연료의 증발을 최소화하여 가연성 연료 증기의 생성을 억제하는 방법을 통해 만족시킬 수 있다. 한국형 기동헬기는 피탄에 대한 내폭발 요구도를 만족시키기 위해 불활성가스발생장치를 통해 연료탱크 내 불활성 가스를 충진 시켜 산소농도를 낮추는 방법을 적용하고 있다. 본 논문에서는 국내 무기체계 양산단계의 부품국산화 업무 절차에 따라 개발된 불활성가스 발생장치의 개발 과정 전반에 대하여 기술하고 있다. 순수 국내 기술력을 통해 개발/제작 되었으며, 단품 성능 시험 및 항공기 장착 시험을 통해 기 장착되어 있는 제품 대비 동등이상의 성능을 가짐을 확인할 수 있었다.

• Tribology and Lubricants
• /
• 제28권3호
• /
• pp.112-116
• /
• 2012

wet-type multiple disk brakes are very important parts of turning decelerator for deck crane, because they are advanced in durability and braking power, and can be designed compactly. Thus, we designed and made wet-type multiple disk brakes of turning decelerator for deck crane to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 2 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.381-386
• /
• 2009

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wettype multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are dvanced in durability and braking power, and can be designed compactly. Thus, we adesigned and made wettype multiple disk brakes of axle for the wheel excavator to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 3 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient on temperature of oil and applied pressure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1427-1430
• /
• 2005

In this paper, the range finder system using a PSD sensor suitable for low-cost localization sensor of a mobile robot. Because the distance-voltage output of a PSD sensor has a non-linear property, the linearizing function is proposed through the experimental characteristics of the sensor. And the characteristics are tested and the distance-voltage data are measured in various colors and materials of object. For a known environment, a mobile robot scans the surroundings using a PSD sensor that can rotate $360^{\circ}$. Finally, the performance and accuracy of the developed system are verified according to the comparison the distance by proposed function with real distance

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.8-14
• /
• 1999

In this study, acoustic emission(AE) technique has been applied to detecting quench which is one of the serious peoblems to assure the integrity of superconducting coil at cryogenic temperature. The characteristics of AE parameters have been analyzed by correlating with the number of quenches, whinding tension of superconducting coil and charge rate of transport current. The quench localization was also performed using AE signals and there was also good correlation between quench current and AE parameters such as AE energy and AE events. In this study, it was confirmed that AE signals were mainly due to the conductor motion which caused by premature quenching. It was also found that optimized winding tension at superconducting coil was needed to prevent quench caused by conductor motion.

• Structural Engineering and Mechanics
• /
• 제16권2호
• /
• pp.141-152
• /
• 2003

Characteristics of solutions of softening plasticity are discussed in this article. The localized and non-localized solutions are obtained for a three-bar truss and their stability is evaluated with the aid of the second-order work. Beyond the bifurcation point, the single stable loading path splits into several post-bifurcation paths and the second-order work exhibits several competing minima. Among the multiple post-bifurcation equilibrium states, the localized solutions correspond to the minimum points of the second-order work, while the non-localized solutions correspond to the saddles and local maximum points. To determine the real post-bifurcation path, it is proposed that the structure should follow the path corresponding to the absolute minimum point of the second-order work. The proposal is further proved equivalent to Bazant's path criterion derived on a thermodynamics basis.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권7호
• /
• pp.310-313
• /
• 2003

The purpose of this paper is to evaluate the effects of pre-formed space charges by DC stress on partial discharge(PD) characteristics in XLPE. We have suggested a modified pulsed electro-acoustic(PEA) method and successfully measured both space charge distribution and current simultaneously. It has been demonstrated that the PD patterns are strongly influenced by the pre-formed space charge distributions, which are hardly disappeared up to AC 8㎸ in electrode configuration including air gap between XLPE layer and electrode. From the results, it could be said that the pre-formed space charges by DC stress can play harmful and dangerous roles in insulating system under AC operating voltages because of the field distortion and localization due to the pre-formed space charge.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.41-43
• /
• 2013

In order to simulate and visually observe combustion phenomena in cylindrical radial-flow porous inert media, a radial multi-channel burner, made of transparent quartz plates, was fabricated. Flame stabilization characteristics and its pulsating instability in the burner were experimentally investigated with respect to various mixture flow rates and equivalence ratio. As a result, five different flame behaviors, such as stable flame, pulsating instability, sudden extinction, blowout and unstable extinction, were observed. Mean radial position of circularly arranged multi-flame and its averaged burning velocity were measured and then compared to the freely propagating flame. The multi-flame pulsation frequency is about several tens of Hz and it is supposed to be generated by the heat diffusion enhancement to cold pre-mixture by the intensive gas-solid interaction.