• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.973-976
• /
• 1997

Process behavior in metal cutting results from the chip formation process which is not easily observable and measurable during machining. By means of the finite element method chip formation in orthogonal metal cutting is modeled. The reciprocal interaction between mechanical and thermal loads is taken into consideration by involving the thermo-viscoplastic flow behavior of workpiece material. Local and temporal distributions of stress and temperature in the cutting zone are calculated depending on the cutting parameters. The calculated cutting forces and temperatures are compared with the experimental results obtarned from orthogonal cutting of steel AISl 4140. The model can be applied in process design for selection of appropriate tool-workpiece combination and optimum cutting conditions in term of mechanical and thermal loads.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.76-82
• /
• 2000

It is well known that during the oxygen cutting process residual thermal stresses are produced in weldment. The local non-uniform heating and subsequent cooling which takes place during any welding process causes complex thermal strains and stresses to finally lead to residual stresses exceed to the yield stress. High tensile stresses combined with applied structural load in the region near the welded joint can given rise to distortion brittle fracture change of the fatigue strength and stress corrosion cracking. The appropriate treatment of the welded component which reduces the peak of he welding residual stresses is believed to lower risk of the fracture during the service of the structure. In this study the impact loading in oxygen cutting frame was applied to reduce the residual stress. After applying the impact loading redistribution of resid-ual stress was measured by cutting method and the effect of fatigue was tested.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.581-585
• /
• 2007

Swarm formation of Scapholeberis kingi Sars 1903 was observed in a shallow reservoir on 27 May 2007 (Dongpan Reservoir) for the first time. Dense swarms composed of asexual females, only occurred during daytime (13:00-17:00, local time) at the littoral zone. Correlation between density of S. kingi and environmental factors such as water temperature and density of juvenile fish were positively significant. Therefore, it is suggested that the swarming of S. kingi seems to be induced for predator avoidance than increase of mating chance, and water temperature may affect their swarming behavior.

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.81-87
• /
• 2008

Distribution, population structure, and growth of the bivalve Protothaca euglypta were investigated for clams collected from the northwestern part of the East Sea of Russia. This species is distributed in further northern area than it was found earlier. In the southern area, this clam is found in the intertidal zone, up to 8 m in depth. It is one of the most numerous infaunal species of bivalves, and protected to wave action in the gravel-pebble and sand with rubble biotope. Population density of P. euglypta reaches 500 $spc./m^2$, and biomass 2 $kg/m^2$. Size and age composition of the local settlements and allometric growth of P. euglypta depend on a biotope. The growth rate of P. euglypta considerably reduces in case of the northern boundary area, whereas life span increases.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.451-457
• /
• 2010

Increasing demands on the safety of public train services have led to the development of various types of security monitoring systems. Most of the surveillance systems are focused on the estimation of crowd level in the platform, thereby yielding too many false alarms. In this paper, we present a novel security monitoring system to detect critically dangerous situations such as when a passenger falls from the station platform, or when a passenger walks on the rail tracks. The method is composed of two stages of detecting dangerous situations. Objects falling over to the dangerous zone are detected by motion tracking. 3D depth information retrieved by the stereo vision is used to confirm fallen events. Experimental results show that virtually no error of either false positive or false negative is found while providing highly reliable detection performance. Since stereo matching is performed on a local image only when potentially dangerous situations are found; real-time operation is feasible without using dedicated hardware.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.115-118
• /
• 2004

In this study, amplitudes of turbulence excitation are obtained for selected tubes inside the KSNP SG and their normal work-rates are investigated to estimate the magnitude of fretting-wear. From the results of numerical calculation, row 40&41 tubes show the maximum work-rates. Up to this row number, the work-rates inside the row 41 have much larger values than those of outside tubes. This phenomenon reveals the particular central one which has larger normal work-rate than that of outside zone. It turns out that both of the higher local mode at the U-bend region and the larger value of effective mass in the central region Increase the normal work-rate enormously.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.327-329
• /
• 2004

Reliability evaluation of the welded structure for industrial structures/facilities such as power plant and petro-chemical refinery facilities is very important, and especially the reliability diagnosis of the structure is based on the exact evaluation of materials properties. But, the conventional Pre-Qualification test had the difficulty of evaluating the real material properties in the field because the test was made on the specimen with the simulated welding for the in-field welding condition. Therefore, a continuous indentation technique was proposed for simple and non-destructive testing of in-field structures and for selective testing of local range such as heat affected zone and weldment.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.182-188
• /
• 2016

In this study 'forest design in waterside unused land' of 'waterside area' in the specificity that multilateral, including landscape, recreation, social and environmental aspects in the space, taking into account by multiple factors :Raise 'practicality' than a functional management and police to hang out with, each element is usually way to improve the beauty. There is currently carried out waterside green area creation, which is artificial plantation and open spaces only emphasizing 'landscape' with lacking multi-function purpose, as a 'forest design in waterside unused land' strategy but it should be lowered by performance in this strategy. And the study suggested a strategy which prepared cultural and social infrastructure to be able to attract different fund and build local character as an alternative demand plan considered environmental character as a top priority.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.137-146
• /
• 1995

The reference model for UNI (User Network Interface) of B-ISDN is consisted of three function groups (B-NTI, B-NT2 and B-TE). In this study, we constructed passive B-NT1 module which can be utilized for optical link management and repair, one of main functions of B-NT1. For the convenience of installation and management, this module is only consisted of passive optical devices. And at a local exchange center linked with the module, the broken zone of optic link is able to be monitored without interrupting services. In addition, we performed the power burget analysis for the design of efficient optic link including this module.

• Journal of the Korean housing association
• /
• v.7 no.2
• /
• pp.121-129
• /
• 1996

This study was to estimate how about various effects on the body thermal sensation as air velocity. clo. mean radiant temperature and resultant temperature are varied. The indoor thermal environment elements are measured under the five different of air velocity. Using the above considerations. the following results are obtained. ▶ The states, the air velocity under 0.5 m/s and 0.63 to 0.9 clo. were shown that the comfort zone of mean radiant temperature by 21.2~24.7C, the neutral point by 22.8C, the resultant temperature by 20.7-24.4C and the neutral point by 22.6C. ▶ On equal condition, the draft was occurred at a given air-velocity under 0.5m.s. It was also appeared the floor panel heating system affecting the body thermal sensation by the subject’s below-chest parts and the local discomfort by sensations on the feet and the knees.