• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.1
• /
• pp.85-94
• /
• 2011

The species composition and distributions of benthic marine plants on the East Coast of Korea were studied. We examined all species found in the intertidal and subtidal zones at four sites seasonally from August 2006 to May 2009. Of the 148 species identified, 92 were rhodophytes, 39 were phaeophytes, 16 were chlorophytes, and 1 was a seagrass. The most species (125) were found at Jukbyeon, while the fewest (99) were found at Chuksan. Overall, the numbers of species were highest during the spring and lowest in autumn. Seventy-five species (50 rhodophytes, 15 phaeophytes, 9 chlorophytes, and 1 seagrass) were found at all four sites. The dominant species providing cover were melobesioidean algae, Sargassum spp., Phyllospadix japonica, and Corallina pilulifera. The vertical distribution of benthic marine plants was characterized by C. pilulifera, Sargassum spp., Hizikia fusiformis, Grateloupia elliptica, Symphyocladia latiuscula, Grateloupia lanceolata, Ulva pertusa, and Chondria crassicaulis in the intertidal zone; Sargassum spp., P. japonica, Prionitis cornea, C. pilulifera, and Acrosorium polyneurum at 1 m depth; Sargassum spp., P. japonica, and melobesioidean algae at 5 m depth; and melobesioidean algae at 10 m depth. There was variation among the sites, presumably due to differences in the local conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1510-1520
• /
• 1996

An experimental study on the flow over the axisymmetric backward-facing step was carried out. The purpose of the present study is to investigate the effect of the separating streamline curvature on the reattachment length and to understand the structure of recirculating flows. Local mean and fluctuating velocity components were measured in the separating and reattaching axisymmetric region of turbulent boundary layer on the wall of convex cylinder placed in a water tunnel by using 2-color 4-beam fiber optics laser Doppler velocimetry. The study demonstrates that the reattachment length increases with increasing separating streamline curvature. It is also observed that the reverse flow velocity and turbulent kinetic energy increase with an increase in the separating streamline curvature. In addition, the behavior of maximum turbulent stresses show that the effect of separating streamline curvature is larger in the region of recirculating zone(X/H<2) than in the region of reattachment point.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.96-104
• /
• 2006

In the present paper, the effects of combustion instability on flow structure and flame dynamic with the configurations of burner exit in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. As a result of mean flow field, the change of divergent half angle(${\alpha}$) at burner exit results in variations in the size and shape of the central toroidal recirculation(CTRZ) as well as flame length by changing corner recirculation zone(CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than that of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is the most shortest, while that in the case of ${\alpha}=30^{\circ}$ is the longest by the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it is identified that the case of ${\alpha}=45^{\circ}$ shows the most largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, comparing with that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons are discussed in detail through the analysis of unsteady phenomena about recirculation zone and flame surface. Finally the effects of flame-acoustic interaction are evaluated using local Rayleigh parameter.

• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.15-25
• /
• 2008

Due to the differences between a mobile ad-hoc network and a sensor network, the pre-existing autoconfiguration for a mobile ad-hoc network cannot be simply applied to a sensor network. But. a mechanism is still necessary to assign locally unique addresses to sensor nodes efficiently. This paper proposes a hybrid IDs assignment scheme of local area sensor networks. The IDs assignment scheme of hybrid method combines a proactive IDs assignment with a reactive IDs assignment scheme. The proposed scheme considers efficient communication using reactive IDs assignment, and security for potential attacks using zone-based self-organized clustering with Byzantine Agreement in sensor networks. Thus, this paper has solved the shortage of security due to minimizing network traffic and the problem of repairing the network from the effects of an aberrant node in sensor networks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.517-528
• /
• 2007

Extraction of the coastal boundary is important because the boundary serves as a reference in the demarcation of maritime zones such as territorial sea, contiguous zone, and exclusive economic zone. Accurate nautical charts also depend on well established, accurate, consistent, and current coastline delineation. However, to identify the precise location of the coastal boundary is a difficult task due to tidal and wave motions. This paper presents an efficient way to extract coastlines by applying digital image processing techniques to Synthetic Aperture Radar (SAR) imagery. Over the past few years, satellite-based SAR and high resolution airborne SAR images have become available, and SAR has been evaluated as a new mapping technology. Using remotely sensed data gives benefits in several aspects, especially SAR is largely unaffected by weather constraints, is operational at night time over a large area, and provides high contrast between water and land areas. Various image processing techniques including region growing, texture-based image segmentation, local entropy method, and refinement with image pyramid were implemented to extract the coastline in this study. Finally, the results were compared with existing coastline data derived from aerial photographs.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.71-80
• /
• 1997

The city's countryside is adjusting to change by urbanization. The recent changes in rural landuse and damages of local landscape characteristics are very serious. But, few studies address the relationship between land-use and quality of landscape for these area. The aim of this study is to clarify causes and problems of the change through investigating changes of landscape as a function of land-use. The results are as follows 1) The change of landscape can be seen as a functional of land-use. Landscapes are characterized by changes of regional environments. These are the urban-rural fringe area which need special consideration for urban development and also for rural landscape quality. 2) 11 types of landscape patterns are found for landscape management. these are Regional commercial area, Apartment development, Recreation & seisure, Golfs, Housing complex, Industrial complex, Vinyl house, Rural village, Evaded facilities, Rivers, Cultural heritages. These landscape types are explained as 'stimuli-responses model'in Bryant's Forces of urbanization. 3) The policy implications of these study are as follows : First is the necessity of landscape management in Grown Management Zone and Natural Reserved Zone in the Metropolitan level, Second is the necessity of development control in semi- agricultural area. The last is the necessary of long range management plan in the urban-rural fringe area.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.393-397
• /
• 2005

A process map has been developed, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion fur pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• The Korean Journal of Quaternary Research
• /
• v.15 no.1
• /
• pp.13-20
• /
• 2001

The Pollen analyses and the $^{14}C$-dating of the sediments of Moojechi bog were performed in order to study the vegetation history and the environmental changes of the southeasterm montane zone of Korea. These results show that the local pollen assemblage of the montane zone changed from lower upward cool-temperate northern/altimontane forest(MI) into cool-temperate central/montane forest(M II a) and cool-temperate souther $n_montane forest(M II b). Furthermore, In the case of the present cool temperature deciduous broad-leaved forests, its distribution would begin to be expanded from 8,000yr B.P., and its regional differentiation would be developed from 6,700yr B.P..P.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.71-74
• /
• 2007

Large Eddy Simulation(LES) has been conducted to insight interaction effects of turbulent flow and chemical reaction of a lean-Premixed swirl combustor. The unsteady turbulent flame is carefully simulated so that the motion of flow and flame can be characterized in detail. Fuel lumps escaping from the primary combustion zone move downstream and consequently produce local hot spots conveying large vortical structures in the azimuthal direction. The correlation between pressure oscillation and unsteady heat release is examined by the spatial and temporal Rayleigh parameter.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.77-82
• /
• 1992

When a crystal is grown by FZ process, the melt zone is located at between the solid of upper and lower side and is kept by the solid-liquid interface tension. On the surface of the melt zone, a surface tension gradient is occured by the difference of temperature and solute concentration, it is the driving force of marangoni flow. The crystal even in the steady state growth can become imperfect for the dislocation distribution and the solute concentration in the peripheral region of the crystal are higher than those in the inner part and the probability of the formation of the defects such as voids, bubble penetration, secondary phase creation and crack is high near the solid-liquid interface. This is because the solid -liquid interface becomes irregular because of the local variation of temperature in that region due to marangoni convection.