• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.647-657
• /
• 2018

This study was carried out to review as criteria for zoning at management plan for river restoration, in case of naturalness of river environment and suitability of water friendly activity suggested at assessment system of river environment in Korea. As a result of reviewing law and guidelines concerned, historic & cultural resources used as criteria for preservation zone, it was judged that the historical and cultural value as the preservation zone needs to be examined in connection with waterfriendly activity zone. In this study, we propose a sequential evaluation method to distinguish the waterfriendly activity zone by applying suitability of waterfriendly activity reflecting land use social characteristics, followed division of preservation and restoration zone at the first stage by the naturalness of river environment reflecting the natural environmental characteristics as a result of application to the test bed, Gap and Yudeung streams. In particular, it was concluded that the results of the present study provided more clear criteria for the problem that the last criteria for zoning did not reflect the difference between the left and the right side of stream, or the designation of the excessive water friendly zone. On the other hand, the criteria for designation in this study reflect the characteristics of various river environments as well as the setting of assessment unit based on the physical characteristics of rivers, and other legal regulations and local situations should be adjusted and supplemented in administrative procedures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.271-278
• /
• 2006

In design of groyne series, groyne spacing is a important factor and have an effect on not only the characteristics of backward and recirculation flow in groyne zone but also flow field in main channel. It is necessary study about flow pattern of recirculation zone and main channel that is a cause of bad change, local scour and bank erosion by groyne spacing. In this study, flow variation of groyne zone and main chanel for spacing of groynes were analyzed from the experiment results in order to offer a fundamental data that can be used to decide the proper groyne spacing. Experiments were conducted 12 cases for groyne spacing(L) by groyne length(l) rate and the velocity profile was measured using LSPIV and ADV. From the results, two vortex flows developed in recirculation zone for L/l=3~9 and three vortex flows developed over L/l=10. The velocity of backward flow in recirculation zone was decreased up to 20% over L/l=4. The velocity of main channel flow was increased from 1.3 to 2.0 times by groyne spacing and the rate of velocity increased by increasing groyne spacing. The maximum velocity occurred in 0.7~0.8 times of groyne spacing downstream of upper groyne.

• Journal of Environmental Science International
• /
• v.24 no.1
• /
• pp.81-96
• /
• 2015

The characteristics of atmospheric dispersion of radioactive material (i.e. $^{137}Cs$) related to local wind patterns around the Kori nuclear power plant (KNPP) were studied using WRF/HYSPLIT model. The cluster analysis using observed winds from 28 weather stations during a year (2012) was performed in order to obtain representative local wind patterns. The cluster analysis identified eight local wind patterns (P1, P2, P3, P4-1, P4-2, P4-3, P4-4, P4-5) over the KNPP region. P1, P2 and P3 accounted for 14.5%, 27.0% and 14.5%, respectively. Both P1 and P2 are related to westerly/northwesterly synoptic flows in winter and P3 includes the Changma or typhoons days. The simulations of P1, P2 and P3 with high wind velocities and constant wind directions show that $^{137}Cs$ emitted from the KNPP during 0900~1400 LST (Local Standard Time) are dispersed to the east sea, southeast sea and southwestern inland, respectively. On the other hands, 5 sub-category of P4 have various local wind distributions under weak synoptic forcing and accounted for less than 10% of all. While the simulated $^{137}Cs$ for P4-2 is dispersed to southwest inland due to northeasterly flows, $^{137}Cs$ dispersed northward for the other patterns. The simulated average 137Cs concentrations of each local wind pattern are $564.1{\sim}1076.3Bqm^{-3}$. The highest average concentration appeared P4-4 due to dispersion in a narrow zone and weak wind environment. On the other hands, the lowest average concentration appeared P1 and P2 due to rapid dispersion to the sea. The simulated $^{137}Cs$ concentrations and dispersion locations of each local wind pattern are different according to the local wind conditions.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.4
• /
• pp.41-48
• /
• 2022

The purpose of this study is to present the implications of the rural living area setting and rural spatial structure analysis of the rural spatial strategy plan through case analysis. Following the decentralization of autonomy and the promotion of the transfer of state affairs to local areas, some of the general agricultural and fishing village development projects of the Ministry of Agriculture, Food and Rural Affairs were transferred to local areas. In addition, in 2020, the Ministry of Agriculture, Food and Rural Affairs introduced a rural agreement system for 113 cities and counties. However, since the understanding of the field is still low, this study attempted to present implications through a case analysis of the structure of rural space and the establishment of rural living areas in three local governments in Chungcheong. As a result of the study, in the stage of establishing the living zone, it is necessary to comprehensively review the contents reviewed in the analysis of the current status and conditions. However, the two local governments had insufficient interpretation of the axis by function and the establishment of the base area, or were using the upper plan as it was. Second, the source of the data used in the survey on the distribution status of living SOC facilities is unclear. Since the distribution status of living SOC facilities overlaps with accessibility analysis, OD data analysis, and resident survey results and is used as the basis for setting living areas, the data source should be clearly marked, and verification should be possible. Third, amenity (facility) resources were classified and analyzed according to the conditions and characteristics of local governments. The local government that applied the guidelines as they were was A local government, and the remaining local governments conducted surveys and analysis according to the current status. Forth, since the establishment of the rural living area is the minimum unit supported by government policies through future rural agreements, it is necessary to distinguish them based on quantitative standards in the process of establishing them. Only one case area presented clear grounds and standards, and the rest of the case areas presented standards but are based on non-quantitative standards. In order for rural agreements to be sustainable in the future and benefit local residents, it is necessary to use or establish a government-level institution that can collect and produce objective data. In addition, it is necessary to find ways to specify and standardize the standards for setting the living area and specify them in the guidelines.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.73-83
• /
• 2016

Bearing stress near anchor plates is usually very high due to prestressing force in anchorage zone of concrete structure used post-tensioned prestressed method. In order to effective utilization of cross section and crack control, appropriate size of anchorage plates should be used to prevent crack initiation and failure of concrete structures eventually. This study aims to suggest equation for effective area of bearing plate of rectangle type and circular type by Highway Bridge Design Specification and PTI etc. A shape factor according to bearing plate shape is suggested based on numerical analysis, and it can be used suitability for design of special anchorage plate dimension.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.7
• /
• pp.90-102
• /
• 2015

To understand the hyrogeochemical variation of bedrock aquifer during underground space construction, various graphical methods including multiple-component plots and chemical trends were used to estimate the mixing rate between seawater and freshwater and to investigate the evolution of water quality. The water chemistry and mixing rate between fresh and sea waters, which are generally localized in the construction area (MW-7, in land), shows typical characteristics of freshwater that doesn’t affect its validity as seawater intrusion. Especially, the water chemistry of a MW-4 (coastline) was classified as Na-Cl type, Na-HCO₃ type, and Ca-Cl type due to the influence of the seawater intrusion. And hydrogeochemical and isotopic data show that local freshwater is subjected to geochemical processes, such as reverse ion-exchange. Throughout the Chadha’s diagrams, four different case histories with the temporal and spatial variation of groundwaters in the study area were proposed, which is recommended to interpret the hydrogeochemical reactions effectively.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.527-539
• /
• 2013

Purpose: Methods for increasing health-care service quality are considered for a women-centered hospital located on a local city. A walk-through audit is applied to uncover areas for improvement. Methods: A survey questionnaire with 25 questions is constructed based on a service blueprint for a walk-through audit, and a survey is conducted both to patients and service providers to assess a health-care service quality. Frequency analysis, statistical tests and customer-provider analysis are used to analyze surveyed data. Results: According to customer-provider analysis, 6 attributes belong to 'problem unawareness' zone in which they are rated high by service providers but low by patients, and another 6 attributes belong to 'problem awareness' zone in which they are rated low by both groups. These attributes are considered to be improved with priority. Conclusion: Both patient group and service provider group have lots of different perceptions on most attributes that are examined, and the hospital to be studied is, in general, competitive in technical quality and less competitive in functional quality.

• Structural Engineering and Mechanics
• /
• v.51 no.1
• /
• pp.131-140
• /
• 2014

This study focuses on seismic behaviour of tall piers characterized by high slender ratio. Two analysis models were developed based on elastic-plastic hinged beam element and elastic-plastic fiber beam element, respectively. The effect of the division density of elastic-plastic hinged beam element on seismic demand was discussed firstly to seek a rational analysis model for tall piers. Then structural seismic behaviour such as the formation of plastic hinges, the development of plastic zone, and the displacement at the top of the tall piers were investigated through incremental dynamic analysis. It showed that the seismic behaviour of a tall pier was quite different from that of a lower pier due to higher modes contributions. In a tall pier, an additional plastic zone may occur at the middle height of the pier with the increase of seismic excitation. Moreover, the maximum curvature reaction at the bottom section and maximum lateral displacement at the top turned out to be seriously out of phase for a tall pier due to the higher modes effect, and thus pushover analysis can not appropriately predict the local displacement capacity.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.56-62
• /
• 2017

Because adhesively bonded joints are used in many structural systems, it is important to predict accurate adhesive strengths. Composite aircraft with many joints are easily exposed to low temperatures and high relative humidity. This paper presents a humidity aging effect on the adhesive strength of a composite single-lap joint (SLJ). The adhesive strength of the SLJ is predicted using a finite element analysis with a cohesive zone model (CZM) technique. The humidity aging effect is evaluated based on the adhesive strength and CZM parameters. A lap joint test is carried out on the composite SLJ specimens, which are exposed for four months of 100% R.H. at $25^{\circ}C$. The predicted strengths are in good agreement with experimental data, and the actual crack propagation is satisfactorily simulated using the local CZM technique.

• Computers and Concrete
• /
• v.5 no.4
• /
• pp.343-358
• /
• 2008

This article focuses on concrete structures submitted to impact loading and is aimed at predicting local damage in the vicinity of an impact zone as well as the global response of the structure. The Discrete Element Method (DEM) seems particularly well suited in this context for modeling fractures. An identification process of DEM material parameters from macroscopic data (Young's modulus, compressive and tensile strength, fracture energy, etc.) will first be presented for the purpose of enhancing reproducibility and reliability of the simulation results with DE samples of various sizes. The modeling of a large structure by means of DEM may lead to prohibitive computation times. A refined discretization becomes required in the vicinity of the impact, while the structure may be modeled using a coarse FE mesh further from the impact area, where the material behaves elastically. A coupled discrete-finite element approach is thus proposed: the impact zone is modeled by means of DE and elastic FE are used on the rest of the structure. The proposed approach is then applied to a rock impact on a concrete slab in order to validate the coupled method and compare computation times.