• 대기
• /
• 제23권1호
• /
• pp.13-21
• /
• 2013

In this study, the effects of atmospheric stability and surface temperature on the microscale local airflow are investigated in a hydrological suburban area using a computational fluid dynamics (CFD) model. The model domain includes the river and industrial complex for analyzing the effect of water system and topography on local airflow. The surface boundary condition is constructed using a geographic information system (GIS) data in order to more accurately build topography and buildings. In the control experiment, it is shown that the topography and buildings mainly determine the microscale airflow (wind speed and wind direction). The sensitivity experiments of atmospheric stability (neutral, stable, and unstable conditions) represent the slight changes in wind speed with the increase in vertical temperature gradient. The differential heating of ground and water surfaces influences on the local meteorological factors such as air temperature, heat flow, and airflow. These results consequentially suggest that the meteorological impact assessment is accompanied by the changes of background land and atmospheric conditions. It is also demonstrated that the numerical experiments with very high spatial resolution can be useful for understanding microscale local meteorology.

• 한국환경과학회지
• /
• 제3권1호
• /
• pp.39-47
• /
• 1994

Dispersion characteristics of air pollutants in the mountainous coastal area are investigated in considering with the mesoscale local circulations using a two dimensional numerical model with two kinds of topograpy of 500m and 300m. In the model, land-sea breezes and mountain-valley wind are mainly considered under the condition of the absence of large scale prevailing flow in the circulation analysis, and the pollutants dispersion is traced by the Lagrangian methods. According to the results, the wind velocity is affected by topography and is stronger in the case of 500m height mountain than that of 300m, the Pollutants that source is near the coast transported over the mountain and dispersed to behind inland area. It is classified that the topography change control affects the wind velocity and the circulations. The pollutants that source is different transported and concentrated to behind inland and/or diffused to the sea area by the combination of the wind system with topographic changes. The results can be applied to the air pollution control with the arrangement design of industrial area and the planning of coastal developments.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.497-505
• /
• 2016

Operating wind turbine generators at maximum power point requires maximum power point tracking (MPPT) control methods. However, conventional methods cannot track the appropriate maximum power point in situations involving wind turbine systems based on a series operation strategy. These systems comprise one or more local maximum power points, and conventional methods can detect only one local maximum power point closed by a current operation point. This study proposes an advanced MPPT method for the series operation strategy of a small, grid-connected wind turbine system. In determining the appropriate maximum point, operations at certain local maximum power points are analyzed. The results show one appropriate point, which is tracked by the proposed MPPT method. The effectiveness of the proposed method is verified by the experimental results.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.85-89
• /
• 2007

Data of the typhoon affecting Korean peninsula from 1951 to 2005 are obtained from the RSMC best track and six climatological characteristics of the typhoons are examined. Local wind speeds are obtained by the physical model for wind fields. Typhoons are generated by the Monte Carlo simulation and their wind speeds are distributed using Weibull CDF. Simulated typhoon wind speeds are used to obtain different wind speeds corresponding their mean recurrence intervals.

• 신재생에너지
• /
• 제18권4호
• /
• pp.38-53
• /
• 2022

T Recently, the government has been promoting the expansion and supply of renewable energy as an alternative for achieving carbon neutrality and the nationally determined contributions by 2030. In 2020, the Ministries of Industry and Environment and the Korea Forest Service collaborated to build a nationwide onshore wind energy siting atlas considering wind resources and forestry and environmental regulations focused on central regulations. In this study, the ordinances of the local governments were analyzed to examine the effects of regional location regulations on the expansion of onshore wind power energy generation facilities, in addition to those of central regulations. A development permit standard survey of 226 urban plan ordinances of the local governments nationwide showed that presently in 2022, 52 municipalities are applying regulations on wind energy generation facilities by ordinances. This is twice more than that in 2018, when renewable energy power generation facility development was difficult. Additionally, the location regulations applied by these ordinances were organized by items and regions, and regulatory characteristics, such as the number and scope, were analyzed by regions. To analyze the spatial distribution characteristics, JeollaNamdo was selected as the case area. A spatial DB was established for regulated areas based on the regional and central regulations, and the spatial distribution characteristics and the regulatory scope were compared and analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.327-330
• /
• 2008

This paper presents monitoring system for 750kW-class DFIG wind turbine generator system and an architecture for applying standardized communication, IEC61400-25. Monitoring and control system is consists of wind turbine PLC, Local and Remote I/O Server, HMI. and Web-server. Proposed System has been demonstrated in Daegi-ri, Kangwon-do, which aims to test local and/or remote monitoring and control system and evaluate the performance of 750kW-class WTS. Finally we described the design of logical nodes and services based on IEC61400-25 and its application scheme.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.41-49
• /
• 2012

This paper describes the operation mode development for the grid-tied PMSG(permanent magnet synchronous generator) wind power system combined with a battery energy storage. The development of operation modes was carried out through simulations with PSCAD/EMTDC software and experiments with a 10kW hardware prototype. The detailed simulation models for PMSG wind power system and battery energy storage were developed using user-defined models programed with C-code. A 10kW hardware simulator was built and tested in connection with the local load and the utility power. The simulation and experimental results confirm that the grid-tied PMSG wind power system combined with battery energy storage can supply highly reliable power to the local load in various operation modes.

• Wind and Structures
• /
• 제24권6호
• /
• pp.637-656
• /
• 2017

In Japan, at least 28 local winds are known by name, most of them associated with downslope windstorms and gap winds. To review these windstorms, we categorize them based largely on the atmospheric conditions and formation mechanisms, and then focus on representative examples. These representative cases include the "Yamaji­kaze", a typical downslope windstorm, the "Hirodo-­kaze", a downslope windstorm induced by a nearby typhoon (intense tropical cyclone), and the "Karak-kaze", a downslope wind with a clear diurnal variation. Other downslope winds such as the "Inami-kaze" and the gap wind "Kiyokawa­dashi" are also described. Among these winds, the "Yamaji-kaze", "Hirodo-kaze", and "Kiyokawa-dashi" are considered the three most notorious due to their destructive power. After describing and comparing these winds, we discuss remaining issues to be considered in future studies.

• Wind and Structures
• /
• 제31권6호
• /
• pp.575-591
• /
• 2020

Wind load is typically considered as one of the governing design loads acting on a structure. Understanding its nature is essential in evaluation of its action on the structure. Many codes and standards are founded on state of the art knowledge and include step by step procedures to calculate wind loads for various types of structures. One of the most accepted means for calculating wind load is using Gust Load Factor or base bending Moment Gust Load Factor (MGLF), where codes are adjusted based on local data available. Although local data may differ, the general procedure is the same. In this paper, ASCE 7-16 (2017), which is used as the main reference in the U.S., and Korean Building Code (KBC 2016) are compared in evaluation of wind loads. The primary purpose of this paper is to provide insight on each code from a structural engineering perspective. Herein, discussion focuses on where the two codes are compatible and differ. In evaluating the action of wind loads on a building, knowledge of the dynamic properties of the structure is critical. For this study, the design of four figurative high-rise buildings with dual systems was analyzed.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.657-667
• /
• 2005

In this study, we focused on the improvements in the simulation of sea surface wind over the complex coastal area. MM5 model being currently used to predict sea surface wind at Korea Meteorological Administration, was used to verify the accuracy to estimate the local wind field. A case study was performed on clear days with weak wind speed(4 m/s), chosen by the analysis of observations. The model simulations were conducted in the southeastern area of Korea during the selected periods, and observational data such as AWS, buoy and QuikSCAT were used to compare with the calculated wind components to investigate if simulated wind field could follow the tendency of the real atmospheric wind field. Results showed that current operational model, MM5, does not estimate accurately sea surface wind and the wind over the coastal area. The calculated wind speed was overestimated along the complex coastal regions but it was underestimated in islands and over the sea. The calculated diurnal changes of wind direction could not follow well the tendency of the observed wind, especially at nighttime. In order to exceed the limitations, data assimilation with high resolution data and more specificated geographical information is expected as a next best policy to estimate accurately the environment of local marine wind field.