• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.1
• /
• pp.31-37
• /
• 2003

Identification of compatible parental line is of great importance in introduction of useful characters to onion breeding program, beyond the severe hybridization barrier. Phylogenic analysis of Allium section Cepa was conducted through PCR by URPs, repeated sequences of A. fistulosum, and microsatellite markers. Totally 76 accessions originated from 21 countries were clustered into five groups at a 0.84-similarity level: group I;A. cepa and its wild relatives and A. cepa ssp. ascalonicum, group II; A. cepa ssp. wakegii, A. cepa ssp. proliferum and Samcheung-pa group III; A. fistulosum and A. altaicum, group IV; A. galanthum, group V; Soeckkori-pa. Samcheung-pa and Soekkori-pa, Korean local varieties, shared band type of both Cepa group and Altaicum group, indicating that those are derived from interspecific hybridization between A. fistulosum and A. cepa.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.149-156
• /
• 2016

The hypersonic flow on the stagnation streamline of a blunt body is analyzed with quasi one-dimensional (1-D) Navier-Stokes equations approximated by adopting the local similarity to the two-dimensional (2-D)/axisymmetric Navier-Stokes equations. The governing equations are solved using the implicit finite volume method. The computational domain is confined from the stagnation point to the shock wave, and the shock fitting method is used to find the shock position. We propose a boundary condition at the shock, which employs the shock wave angle in the vicinity of the stagnation streamline using the shock shape correlation. As a result of numerical computation conducted for the hypersonic flow over a sphere, the proposed boundary condition is shown to improve the accuracy of the prediction of the shock standoff distance. The quasi 1-D Navier-Stokes code is efficient in computing time and is reliable for the flow analysis along the stagnation streamline and the prediction of heat flux at the stagnation point in the hypersonic blunt body flow.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.991-997
• /
• 2003

A flow field around a disc in an optical disc drive is invested using numerical methods. The high-speed rotating disc induces a strong flow field around the disc, which causes the pressure distribution on the surfaces of the disc. The pressure difference between the upper and the lower surfaces causes the deformation of the disc. In the first part of this study, flow fields around a rotating disc and a stationary wall are investigated using a similarity solution method, in order to identify the effect of the distance between the disc and the wall on the pressure distribution on the surfaces of the disc. In the second part, flow field in a slim-type optical disc drive is studied using a commercial code in order to consider the effect of the vortices generated by the local geometry of the drive.

• The Research Journal of the Costume Culture
• /
• v.7 no.4
• /
• pp.38-51
• /
• 1999

The purpose of this study finds that (1) history of the First birthday rite(첫돌 의례) and (2) changing process of the First birthday\`s dress and ornaments(첫돌 복식). The results of this study are as follows. The history of the first birthday rite has been continued vary long years in Korea, but it\`s origin is not clearness. The purpose and form of the first birthday rite are vary similarity in China and Korea. The rate of infant mortality was regarded that an absolute element of the first birthday rite. Making process of the first birthday\`s dress and ornaments was not definite, The adoption of that\`s form and elements act on affect local·homely·individual situation. First birthday\`s dress and ornaments was changed by changing process and convert of recognition about First birthday rite. It shows that the change of rites clothing contacted with changing process of rites.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.3-9
• /
• 1999

The vortex tube is a simple device which splits a compressed gas stream into a cold stream and a hot stream without any chemical reactions. Recently, vortex tube is widely used to local cooler of industrial equipments and air supply system. In this study, the insulation effect of surface on the efficiency of vortex tube was performed experimentally. The experiment is carried out for nozzle area ratio of 0.194, diameter ratio of cold end orifice of 0.6 and input pressure ranging from 0.2Mpa to 0.5Mpa. The purpose of this study is focused on the effect of surface insulation of vortex tube with the variation of cold air mass flow ratio. The results indicate that the temperature difference of cold and hot air are higher about 12% and 30% than that of not insulated vortex tube respectively. Furthermore, for the insulated vortex tube, the similarity relation for the prediction of cold end temperature as the function of cold air mass flow ratio and input pressure is obtained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.12
• /
• pp.945-953
• /
• 2008

Laminar film condensation of saturated vapor in forced flow over a flat plate is analysed. The problem is formulated as exact boundary-layer solution and integral approximate solution. From numerical solutions of the governing equations, it is found that the energy transfer by convection and the effect of inertia term in the momentum equation in negligibly small for low pressure but quite important for high pressure. The condensate rate, liquid-vapor interfacial shear stress and local heat transfer are strongly dependent on the reduced pressure $P_r$ and the modified Jacob number Ja/Pr.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.11a
• /
• pp.145-156
• /
• 2003

This paper for real time object tracking in this treatise detect histogram analysis that is accumulation value of binary conversion density and edge information and body that move by real time use of difference Image techniques and proposed method to object tracking. Firstly, we extract edge that can reduce quantity of data keeping information about form of input image in object detection. Object is extracted by performing difference image and binarization in edge image. Area of detected object is determined by threshold value that divide sum of horizontal accumulation value about binary conversion density by value that add horizontalityㆍverticality maximum accumulation value. Object is tracked by comparing similarity with object that is detected in previous frame and present frame. As experiment result, proposed algorithm could improve the object detection speed, and could track object by real time and could track local movement.

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.74-80
• /
• 2015

In cognitive radios, spectrum sensing plays an important role in accurately detecting the presence or absence of a licensed user. However, the intervention of malicious users (MUs) degrades the performance of spectrum sensing. Such users manipulate the local results and send falsified data to the data fusion center; this process is called spectrum sensing data falsification (SSDF). Thus, MUs degrade the spectrum sensing performance and increase uncertainty issues. In this paper, we propose a method based on the Hausdorff distance and a similarity measure matrix to measure the difference between the normal user evidence and the malicious user evidence. In addition, we use the Dempster-Shafer theory to combine the sets of evidence from each normal user evidence. We compare the proposed method with the k-means and Jaccard distance methods for malicious user detection. Simulation results show that the proposed method is effective against an SSDF attack.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.362-363
• /
• 2012

본 논문에서는 한 장의 실제 나무 영상이 주어졌을 시, 사실적인 3차원 나무 모델링(modeling) 및 자가생장(self-growth) 표현을 위한 방법을 소개하도록 한다. 스켈레톤기반의 간략화(skeleton-based abstraction)를 이용하여 동일한 나무 몸통(trunk)을 갖는 다양한 나무 모델생성과 함께 나무의 다면체구조(manifold structure)를 고려한 지오데식 커널(geodesic kernel)을 이용하여 나무의 자가생장을 표현한다. 나무의 자가생장은 사전 정의된 나무 굵기, 전체 크기, 그리고 가지증식 순서정보와 같은 상대적 성장정보(allometric information)를 동시 이용하여 상대적인 나무 생장(allometric tree growth)을 표현하도록한다. 한편, 보여지지않는 나무 가지와 잎들에 대해선, 나무구조는 로컬하게 자기유사성(local self-similarity)을 갖는다라는 고전적인 절차적(conventional procedural) 가정을 이용하여 자동적으로 생성토록한다. 실제영상을 이용한 몇몇들의 실험을 통해 보다 효과적으로 나무 모델 및 생장 표현이 가능함을 보여주도록한다.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.1408-1411
• /
• 2013

객체의 인식과 추적은 컴퓨터 비전 및 영상처리 분야에서 연구가 활발히 진행되고 있다. 특히 얼굴을 인식하고 추적하는 기술은 많은 분야에서 응용될 수 있다. 기존에 연구되어 온 기준 프레임과 관찰 프레임 사이의 차를 이용하여 객체를 인식하고 추적하는 방식은 관찰 대상이 다수인 경우 동일성을 확보하기에는 어려움이 많다. 따라서 본 논문에서는 각각의 프레임에서 빠르게 얼굴 영역을 인식하고, 독립적으로 인지된 얼굴들의 동일성을 연결하는 방법을 제시한다. 제안된 방법의 유용성은 실험으로 검증하였으며, 어느 정도 의미 있는 결과를 관찰할 수 있었다.