• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.760-766
• /
• 2006

In this paper, we present a wideband patch antenna with folded and shorted structure for 5 GHz WLAN(Wireless Local Area Network). The proposed antenna used folded and shorted structure in the rectangular patch for miniaturization and wide frequency bandwidth. The antenna was designed by using 3D simulation program, HFSS(High Frequency Structure Simulator) software of the Ansoft company and the implemented antenna was measured by using HP 8720c network analyzer and far field measurement chamber. Simulation result on the return loss shows fairly good characteristic of at least 13.41dB in whole frequency range of interests, and the 10dB bandwidth is 1,523MHz which shows wide bandwidth characteristic. And the simulated maximum gain of the proposed antenna is 6.57 dBi at 5.825GHz. Measured result for the 10dB bandwidth of the implemented folded and shorted structure antenna is 1,377 MHz. Measured maximum gain of the implemented antenna is 6.87dBi at 5.775GHz. Measured results for the implemented antenna showed applicable performances for the 5 GHz WLAN.

• Journal of Korea Port Economic Association
• /
• v.19 no.1
• /
• pp.161-188
• /
• 2003

The purpose of this paper is to investigate CFZ(custom free zone) and FTZ(free trade zone) in Korean FTZ System and develop Masan Port in Korea Local Port. The main point of this discussion is to approach the efficient method ill developing Masan Port through comparison CFZ and FTZ. For this purpose, this paper is searched the present situation of logistics in Korea and Northeast Asia, also discussed the concept of FTZ in international status. Then CFZ accepted by Korean government started from the concept of FTZ and is the logistic-centered FTZ in the middle of three model, production-centerde model, production-logistic combination, and logistic-centered FTZ. But CFZ in centering logistic excepted the fundamental manufacture in Korean production. and is almost the same about other various sides, i. e. law and enforcement ordinance. etc This problem is decreasing the efficiency in Korean commercial system. Thus this paper indicate the view point and rightness of region economic through study of FTZ and CFZ in Masan Port. This paper says that FTZ is better then CFZ in Masan Port with comparing superior position about economic development direction, industrial structure, Foreign investment attraction, business fluctuation, national-local renovation. Therefore this paper concludes that the development of Masan Port needs the effort as follow : first, Masan Port must apply in enlarging FTA into Free Tree Area. Second, the government must develop the high-density and medium-small scale in Masan Port. Third, the local government must promote the amount of demand in Masan Port logistic. Forth, the government must actively propel great-sphere development in present Masan Port.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.125-132
• /
• 2019

Because the water exposed to shock waves caused by an underwater explosion cannot withstand the appreciable tension induced by the change in both pressure and velocity, the surrounding water is cavitated. This cavitating water changes the transferring circumstance of the shock loading. Three phenomena contribute to hull-plate damage; initial shock loading and its interaction with the hull plate, local cavitation, and local cavitation closure then shock reloading. Because the main concern of this paper is local cavitation due to a near-field underwater explosion, the water surface and the waves reflected from the sea bottom were not considered. A set of governing equations for the structure and the fluid were derived. A simple one-dimensional infinite plate problem was considered to verify this uncoupled solution approach compared with the analytic solution, which is well known in this area of interest. The uncoupled solution approach herein would be useful for obtaining a relatively high level of accuracy despite its simplicity and high computational efficiency compared to the conventional coupled method. This paper will help improve the understanding of fluid-structure interaction phenomena and provide a schematic explanation of the practical problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1614-1632
• /
• 2017

Bag of visual words is a popular model in human action recognition, but usually suffers from loss of spatial and temporal configuration information of local features, and large quantization error in its feature coding procedure. In this paper, to overcome the two deficiencies, we combine sparse coding with spatio-temporal pyramid for human action recognition, and regard this method as the baseline. More importantly, which is also the focus of this paper, we find that there is a hierarchical structure in feature vector constructed by the baseline method. To exploit the hierarchical structure information for better recognition accuracy, we propose a tree regularized classifier to convey the hierarchical structure information. The main contributions of this paper can be summarized as: first, we introduce a tree regularized classifier to encode the hierarchical structure information in feature vector for human action recognition. Second, we present an optimization algorithm to learn the parameters of the proposed classifier. Third, the performance of the proposed classifier is evaluated on YouTube, Hollywood2, and UCF50 datasets, the experimental results show that the proposed tree regularized classifier obtains better performance than SVM and other popular classifiers, and achieves promising results on the three datasets.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.429-432
• /
• 2007

For smart structure technologies, the interests in wireless sensor networks for structural health monitoring are growing. The wireless sensor networks reduce the installation of the wire embedded in the whole structure and save the costs. But the wireless sensor networks have lots of limits and there are lots of researches and developments of wireless sensor and the network for data process. Most of the researches of wireless sensor network is applying to the civil engineering structure and the researches for the highrise building are required. And strain-based SHM gives the local damage information of the structures which acceleration-based SHM can not. In this paper, concept of wireless sensor network for structural health monitoring of highrise building is suggested. And verifying the feasibility of the strain-based SHM a strain sensor board has developed and tested by experiments.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.395-398
• /
• 1998

In this paper, a method for the improvement of learning speed and convergence rate was proposed applied it to physiological neural structure with the advantages of artificial neural networks and fuzzy theory to physiological neuron structure, To compare the proposed method with conventional the single layer perception algorithm, we applied these algorithms bit parity problem and pattern recognition containing noise. The simulation result indicated that our learning algorithm reduces the possibility of local minima more than the conventional single layer perception does. Furthermore we show that our learning algorithm guarantees the convergence.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.635-640
• /
• 2001

This paper introduces a frequency-domain method of structural damage identification. It is formulated in a general form from the dynamic stiffness equation of motion for a structure and then applied to a beam structure. The appealing features of the present damage identification method are: (1) it requires only the frequency response functions experimentally measured from damaged structure as the input data, and (2) it can locate and quantify many local damages at the same time. The feasibility of the present damage identification method is tested through some numerically simulated damage identification analyses and then experimental verification is conducted for a cantilevered beam with damage caused by introducing three slots.

• Earthquakes and Structures
• /
• v.7 no.4
• /
• pp.415-448
• /
• 2014

A method is presented in this paper to analyze the dynamic response behavior of suspended building structures. The effect of semi-rigid connections that link suspended floors with their supporting structure on structural performance is investigated. The connections, like the restrains in non-structural suspended components, are designed as semi-rigid to avoid pounding and as energy dissipation components to reduce structural response. Parametric study is conducted to assess the dynamic characteristics of suspended building structures with varying connection stiffness and suspended mass ratios. Modal analysis is applied to identify the two distinct sets of vibration modes, pendulum and bearing, of a suspended building structure. The cumulative modal mass is discussed to ensure the accuracy in applying the method of response spectrum analysis by SRSS or CQC modal combination. Case studies indicate that a suspended building having semi-rigid connections and proper suspended mass ratios can avoid local pounding failure and reduce seismic response.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1238-1246
• /
• 1989

In this paper, a texture synthesis technique based on the NCAR(non-causal auto-regressive) model and the pyramid structure is proposed. In order to estimate the NCAR model parameters accurately from a noisy texture, the MAP(maximum a posteriori) estimation technique is also employed. In our approach, since the input texture is decomposed into the Laplacian oyramid planes first and then the NCAR model is applied to each plane, we are able to obtain a good synthesized texture even if the texture exhibits some non-random local structure or non-homogenity. The usrfulness of the proposed method is demonstrated with seveal real textures in the Brodatz album. Finally, the 2-dimensional MAP estimation technique can be used to the image restoration for noisy images as well as a texture image synthesis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.89-104
• /
• 2008

The aim of this study is to analyze the distribution structure of exclusive digital muti-media broadcasting's contents. This study takes into distribution wether exclusive contents create an additional window being serviced to other media. And it investigates how the contents work in window through analysis of programming table and interview with programming editors of each DMB service company. The window effect is a same notion to the one source multi use. In the film industry, window means a movie distribution that a film can be on one after the other starting the cinema, DVD, local cable channel, and terrestrial television. The key point of this paper is how to new media, DMB, creates its additional window and changes the existing window structure.