• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.789-795
• /
• 2000

Free-surface flows with an arbitrary deformation, induced by a submerged hydrofoil, are simulated numerically, considering two-fluid flows of both water and air. The computation is performed by a finite volume method using unstructured meshes and an interface capturing scheme to determine the shape of the free surface. The method uses control volumes with an arbitrary number of faces and allows cell wise local mesh refinement. The integration in space is of second order, based on midpoint rule integration and linear interpolation. The method is fully implicit and uses quadratic interpolation in time through three time levels. The linear equations are solved by conjugate gradient type solvers, and the non-linearity of equations is accounted for through Picard iterations. The solution method is of pressure-correction type and solves sequentially the linearized momentum equations, the continuity equation, the conservation equation of one species, and the equations for two turbulence quantities. Finally, a comparison is quantitatively made at the same speed between the computation and experiment in which the grid sensitivity is numerically checked.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2589-2591
• /
• 2002

송수신기의 방식에는 직접변환 방식과 기저대역 신호와 LO(Local Oscillator)를 혼합하여 interpolation 기법을 사용하여 중간 주파수 단계까지 up conversion을 하고 두 번째 LO와 IF신호를 혼합하여 RF신호로 변환하여 송신하는 헤테로다인 방식이 존재한다. 본 논문에서는 이런 송수신기 방식 중에서 헤테로다인 방식을 적용하여 QPSK에서의 digital up /down converter를 Simulink 환경에서 설계 및 구현하였다. Up converter는 4배의 interpolation 필터와 4단짜리 cascaded integrate-comb(CIC)필터를 사용하여 입력데이터의 샘플 레이트를 클럭 레이트까지 증가시켰으며, numerically controlled oscillator (NCO)와 mixer를 사용하여 신호를 변조하였다. Down converter의 구조는 up converter와 동일하며 단지 up converter의 반대순서로 구성되어있다. 이런 모든 과정을 Simulink를 이용한 시뮬레이션과 스펙트럼 분석기를 사용하여 검증해 보았다.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.542-546
• /
• 2004

Fully non-local Quasicontinuum method using sub-divided region with Hermite interpolation function is proposed for simulation of carbon nanotube. Tersoff-Brenner potential is adopted for interaction of bonded atoms and also van der Waals force for non-bonded interaction. Bending of single wall carbon nanotube with chirality (20,0) and 15nm length is simulated up to 90 degree. Bending of double wall carbon nanotube with chirality (20,0) and (12,0) is simulated up to 65 degree. Bending of four wall carbon nanotube is simulated up to 45 degree.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1689-1696
• /
• 2017

In the process of obtaining and transmitting image, there is degradation of image due to various noise, and there have been many active studies ongoing to remove the noise added on the images. This thesis has proposed a switching filter processing by the types of noise in order to remove the complex noise added on images. When the center value of local mask is damaged by AWGN based on the noise judgment, the threshold value is applied on standard deviation of local mask to process by applying different weight of weighted mask, and if the image is damaged by the salt and pepper noise, the local mask is subdivided into 4 directions, and processed by applying cubic spine interpolation in the direction with the least slat and pepper noise. Also, in order to evaluate the performance of proposed filter algorithm, the study conducted comparison among the existing methods and proposed filter using PSNR.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.92-100
• /
• 2006

In imaging devices such as digital cameras using a single image sensor, captured images are the sub-sampled images comprised of the pixels that have only one of the three primary colors per a pixel. This images should be restored to the color images through an image processing referred as color interpolation. In this paper, we derive relation between the average of the data from CFA image sensor and the average of each color channel data. By using this relation, a new efficient method for color interpolation is proposed. Also, in order to reduce the zipper effect in a restored image, missing luminance values are interpolated along any edges in the captured image. On the other hand, for the chrominance channel interpolation, we average difference between a chrominance value and a luminance value in a local area, and this average value is added to the pixel value of the interpolated location. The proposed method has been compared with several previous methods, and our experimental results show the better results than the other methods.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.78-88
• /
• 2003

A novel adaptive error concealment technique is proposed using a variable operating region algorithm based on MPEG-4 coding. In the algorithm, a missing block is classified as flat or edge block based on local information from the surrounding blocks extracted using a Sobel operation in a variable operating region (VOR). In this case, the VOR is determined adaptively according to the number of edge directions in the missing block. 1;sing the classification, the flat blocks are then concealed by the Proposed mean based weighted bilinear interpolation (MWBLI) method, and the edge blocks by the boundary directional interpolation (BDI) method. Consequently, the use of the Proposed VOR improves the subjective performance in a curved edge region, while the adaptive processing based on block classification improves the objective performance. Experimental results confirmed that the proposed algorithm produced better results than conventional algorithms, both subjectively and objectively.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.619-630
• /
• 2013

In this paper, we propose an edge directed color demosaicing algorithm considering color channel correlation. The proposed method consists of local region classification step and edge directional interpolation step. In the first step, each region of a given Bayer image is classified as normal edge, pattern edge, and flat regions by using intra channel and inter channel gradients. Especially, two criteria and verification process for the normal edge and pattern edge classification are used to reduce edge direction estimation error, respectively. In the second step, edge directional interpolation process is performed according to characteristics of the classified regions. For horizontal and vertical directional interpolations, missing color components are obtained from interpolation equations based on intra channel and inter channel correlations in order to improve the performance of the directional interpolations. The simulation results show that the proposed algorithm outperforms conventional approaches in both objective and subjective terms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.110-116
• /
• 2017

This paper presents an effective demosaicking algorithm for color filter array (CFA) images acquired from single-sensor devices based on directional interpolation and nonlocal properties of the image. We interpolate the G channel considering diagonal directions as well as horizontal and vertical directions, using a small number of pixels to reflect local properties of the image. Then, we overcome image degradations, such as zipper effects near edges and false colors, by applying nonlocal means (NLM) filtering to the interpolated pixels. R and B channels are reproduced by using directional interpolation with information of the reconstructed G channel and NLM filtering. Experimental results for various McMaster images with high saturation and color changes show that the proposed algorithm accomplishes high PSNR compared with conventional methods. Moreover, the proposed method demonstrates better subjective quality compared with existing methods in terms of reduction of quality degradation, like false colors, and preservation of the image structures, such as edges and textures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.165-173
• /
• 1997

The combined bundle block adjustment with projection center coordinates determined by kinematic DGPS-positioning has reached a high level of accuracy. Standard deviations of the ground coordinates of $\pm{10cm}$ or even better can be reached. On this accuracy level also smaller error components are becoming more important. One major point of this is the interpolation of the projection centers as a function of time between the GPS-antenna locations. A just linear interpolation is not respecting the not linear movement of the aircraft. Based on a least squares polynomial fitting the aircraft maneuver can be estimated more accurate and blunders of the GPS-positions caused by loss of satellite and cycle slips are determinable. The interpolation with a time interval of 3sec in the study area RHEINKAMP is quite different to the interpolation with a time interval of 6-7sec in the study area MAAS. The GPS-positions of the study area are identified as blunders based on a local polynomial regression. This cannot be neglected for precise block adjustment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.536-546
• /
• 2006

Painterly animation is a method that expresses painterly images with a hand-painted appearance from a video, and the most crucial element for it is the temporal coherence of brush strokes between frames. A motion map is proposed in this paper as a solution to the issue of maintaining the temporal coherence in the brush strokes between the frames. A motion map is the region that frame-to-frame motions have occurred. Namely, this map refers to the region frame-to-frame edges move by the motion information with the motion occurred edges as a starting point. In this paper, we employ the optical flow method and block-based method to estimate the motion information. The method that yielded the biggest PSNR using the motion information (the directions and magnitudes) acquired by various methods of motion estimation has been chosen as the final motion information to form a motion map. The created motion map determine the part of the frame that should be re-painted. In order to express painterly images with a hand- painted appearance and maintain the temporal coherence of brush strokes, the motion information was applied to only the strong edges that determine the directions of the brush strokes. Also, this paper seek to reduce the flickering phenomenon between the frames by using the multiple exposure method and the difference map created by the difference between images of the source and the canvas. Maintenance of the coherence in the direction of the brush strokes was also attempted by a local gradient interpolation to maintain the structural coherence.