• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.1
• /
• pp.335-351
• /
• 2006

For a library to be run more efficiently, its internal strengths and weaknesses, external opportunities and threats must be determined for forecasting on the basis of the diagnosis of the internal and external environment and situations, and optimum strategies and measures responsively deducted and utilized. Therefore, I had analyzed the strategic competition of university A's library using SWOT analysis, which has recently been spotlighted as an effective strategic competition analysis method. The conclusions thus obtained are as explained below. Firstly. the strengths of university A's library are the professional qualifications of the employees. work efficiency based on systematic operative plans and division of work load, and provision of high quality service following the establishment of the digital library. Secondly, its weaknesses are the insufficiency and limits of the usable resources, the lack of progressive future operation plans and systems, and the deficiency of a positive service mind. Thirdly, the opportunities are the possibility for new developments in accordance with the digital information environment. reinforcement of the operative efficiency throughout expanding its cooperation with external organizations and other libraries, and its transformation as the local library hub by opening up to the public. Fourthly, the threats are the lack of the school authorities' acknowledgement. and the degradation of the library's status in accordance, the users' various requests for information and advanced professional service according to the rapidly changing information environment. and the restriction of the library service based on the copyright law. Fifthly, as a result of analyzing the strategic competition of university A's library, measures such as the reinforcement of digital service by acquiring digital specialists. provision of extended service through active cooperation with external institutes and libraries. development and provision of differentiated service in accordance with the reinforced copyright law were proposed to improve the library's future competitiveness.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.261-265
• /
• 2003

Cold air accumulation plays a critical role in formulating daily minimum temperature in complex terrain on radiative cooling nights, and spatial interpolation can be improved by accommodating this important topoclimatic variable. Little is known about the spatial scale for computing cold air accumulation which influences daily minimum temperature. Air temperature was measured at 10-minute intervals during September 2002- February 2003 at eight locations within a 1 by 1 km hilly orchard area. Minimum temperature data for suspected radiative cooling nights were collected, and the deviations from reference observations at a near-by KMA automated weather station were calculated. A digital elevation model with a 10m cell size was used to calculate the cold air accumulation at 8 locations. Zonal averages of the cold air accumulation were computed for each location by increasing the cell radius from 1 to 10. Temperature deviations were regressed to a common logarithm of the smoothed averages of cold air accumulation to derive a linear relationship between the local temperature deviation and the site topography. The highest coefficient of determination ($r^2$ = 0.78) was found at a cell radius of 5, which corresponds to an approximately 1 ha boundary surrounding the point of interest.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.146-157
• /
• 1994

Wasong(Orostachys japonicus A. Berger) has been used as anti-cancer medicinal plants from ancient time. This experiment was conducted to obtain some fundamental informations concerning anatomical study, germination test, soil analysis of indigenious districks, adaptaion of soil for wasong. The leaf of wasong was xerotype with spine, mesophyl chloroplast is dense surrounded vascular bundle, with a many large water storage tissue without chloroplast, and was bifacial stomata leaf type. The stem of wasong was amphicribral vascular bundle, central cylinder was cylinder type and protostele. Root was polarch type, potoxylem of it's was arranged in ring shape of annulation and metaxylem. The structure of flower was cymose, was caylyx of 5 sepals, corolla of 5 petals, roecium of 10 stames, ovules of five, placentation parietal, ovary superior, axile placenta. The optimum temperature for seed germination was $25^{\circ}C$ under light and germination percentage was 22.5%. Dormancy breaking was effective for 6-8 days at 5$^{\circ}C$ and at 100 ppm level of $GA_3$ The soil analysis of wasong local districks, content of available $P_2O_5$, Ca were higer than optimal level of upland and C.E.C., exchangeable k was not significantly different of that, but exchangeable magnesium was very low. The growth of wasong was affected draining regardless soil combination treatment.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.34-39
• /
• 2017

Typical flow regime of overflow at barrier or weir constructed in mid and small streams becomes as the submerged flow during most flood events. One of major causes of barrier failure has been reported as the levee-scour near the conjuction node between barrier and levee. However, most related design guidelines in Korea have not mentioned about the protection of levee around barrier or weir in detail. Furthermore, most previous researches have focused on the flow characteristics of overflow around several types of weirs but they did not have considered the material properties of levee itself. In this study, local scour near barrier was investigated with different material properties of levee under the submerged overflow condition which is assumed to reenact a flood event. Based on results from Fritz et al. and Mavis et al., a theoretical formula was also proposed in initial stage of laboratory experiments. And hydraulic experiments were carried out for the verification of the proposed formula. Levee was installed in the prismetic trapezoidal open channel and most parts were made of concrete except for movable section in which scour was expected to occur for the efficiency of experimental procedure. Each compaction of movable section in levee was followed by the basis of the KS F 2312. Further, after performing the experiments to find the optimum water content for each sediment, the specific amount of water was injected before flowing water. The difference between the proposed theoretical formula and experiment results was not much but considerable, which might be caused by the effect of compaction. For theoretical approach, it seemed that the formula did not take into account the compaction of levee, thus the correction coefficient for levee compaction determined in the literature was considered. Finally, the formula for the length of scour around barrier or weir was proposed, which can be useful to predict a levee in the reference design of revetment in mid and small streams. As shortly future study, scour length of levee around barrier or weir under different flow conditions such as perfect overflow condition will be studied and it will be able to contribute to suggest the design formula or criteria under all overflow conditions near barrier or weir.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.39-48
• /
• 2016

An information management system for a solid waste landfill site was developed, in this study, to optimize the operation and management of solid waste landfill in real time in addition to provide the information of landfill status to the landfill operator, public official concerned and local residents. The landfill information management system is composed of two systems (Solid waste landfill history management system and landfill operation and performance management system). The solid waste landfill history management system based on automated RFID/LPR system allows landfill operators to provide information of waste collection vehicles and received waste. In addition, the system aids in the identification of 3-dimensional (3D) position for landfilled solid wastes. Using the landfill operation and performance management system based on 3D laser scanner delivers information about landfill volume, settlement, landfill density, and current landfill capacity to landfill operators in real time, resulting in optimum space utilization. Ultimately, this system would dramatically reduce exposure of landfill operators to hazardous materials and improve the productivity of landfill operations.

• Microbiology and Biotechnology Letters
• /
• v.32 no.1
• /
• pp.78-83
• /
• 2004

In order to screen microorganisms producing phopholipase D (PLD) had high transphosphatidylation activity, about 1,000 Actinomycetes strains were isolated from the 63 soil samples, collected over 6 local area in Korea. When the hydrolytic activity in the supernatant was determined, 131 strains produced PLD more than 0.3U/$m\ell$. Among 131 culture broths tested, 23 ones had transphosphatidylation activity higher than 20% and finally one strain (Actinomycetes KF923), which had highest hydrolytic and transphophadylation activity, was selected. Actinomycetes KF923 showed the highest hydrolytic activity (13U/$m\ell$) and phosphatidylation activity (95%) after 48 h fermentation using the P medium (yeast extract 1%, peptone 1%, glucose 1.5%, glycerol 1%, $CaCO_3$ 0.4%, pH 7.2). PLD was purified from the culture broth of Actinomycetes KF923 and the specific activity of purified PLD was 567U/mg. The molecular weight of PLD was about 55kD and the optimum pH and temperature were pH 6.0 and $60^{\circ}C$, respectively. The stability of PLD toward pH and temperature were high around pH 8.0 and below $40^{\circ}C$ Special metal ions were not necessary to the PLD activity.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.859-872
• /
• 2015

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to $1100^{\circ}C$ at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.4
• /
• pp.526-532
• /
• 2020

A bacterial strain, designated B301^T and isolated from raw chicken meat obtained from a local market in Korea, was characterized and identified using a polyphasic taxonomic approach. Cells were gram-negative, non-motile, obligate-aerobic coccobacilli that were catalase-positive and oxidase-negative. The optimum growth conditions were 30℃, pH 7.0, and 0% NaCl in tryptic soy broth. Colonies were round, convex, smooth, and cream-colored on tryptic soy agar. Strain B301^T has a genome size of 3,102,684 bp, with 2,840 protein-coding genes and 102 RNA genes. The 16S rRNA gene analysis revealed that strain B301^T belongs to the genus Acinetobacter and shares highest sequence similarity (97.12%) with A. celticus ANC 4603^T and A. sichuanensis WCHAc060041^T. The average nucleotide identity and digital DNA-DNA hybridization values for closely related species were below the cutoff values for species delineation (95-96% and 70%, respectively). The DNA G+C content of strain B301^T was 37.0%. The major respiratory quinone was Q-9, and the cellular fatty acids were primarily summed feature 3 (C_16:1 ω6c/C_16:1 ω7c), C_16:0, and C_18:1 ω9c. The major polar lipids were phosphatidylethanolamine, diphosphatidyl-glycerol, phosphatidylglycerol, and phosphatidyl-serine. The antimicrobial resistance profile of strain B301^T revealed the absence of antibiotic-resistance genes. Susceptibility to a wide range of antimicrobials, including imipenem, minocycline, ampicillin, and tetracycline, was also observed. The results of the phenotypic, chemotaxonomic, and phylogenetic analyses indicate that strain B301^T represents a novel species of the genus Acinetobacter, for which the name Acinetobacter pullorum sp. nov. is proposed. The type strain is B301^T (=KACC 21653^T = JCM 33942^T).

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.3-20
• /
• 1987

With regard to the Quaternary formations in the Korean Peninsula, very few studies have been done specially from a stratigraphic viewpoint. The alluvial sediments filling in the valleys have often been considered as the only formation of Quaternary age (more precisely of the Holocone) and so the Pleistocene was regarded as an erosional or nondepositional episode. This is apparently evident from a quick look at the general geological maps of the Peninsula, which show a lithological sequence of Mesozoic or Paleozoic substrata immediately overlain by Holocene alluvium. Likewise, the Pleistocene period was described in terms of unconformity in most local or regional stratigraphical successions of the Peninsula. Recently several different types of Quaternary formation, besides the so-called Holocene alluvium in the valley plain have been found around the Peninsula. They consist of coastal deposits, marine or fluviatile terrace deposits, ancient valley fill deposits or slope deposits. Some parts of the volcanic sediments in Jeju Is. are also known as the Quaternary sequence. Thus the Quaternary deposits in the Peninsula are far more developed than previously known to gelolgists. Moreover the importance of Quaternary research became recently apparent in Korea due to the shortage of raw materials and to the policy of an optimum land-use. Advanced constructions and land reclamation have required more precise engineering parameters of loose materials and an estimation of land stability. This does not imply only the engineering, or the structural properties of the loose material, but at the same time the basic study of the sediments from the stratigraphical and environmental viewpoints has been necessary. In this connection, Quaternary outcrops specially along the coastal fringe of the Peninsula have been mapped, profiled and sampled for sedimentological, clay-mineralogical and palaeomagnetic studies. All these results are compiled for the core of the Quaternary stratigraphy of the Peninsula.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.