• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.87-94
• /
• 1991

This study was carried out to determine the optimal seeding rate of Korean lawngrass in three different soil textures. The results obtained are summarized as follows;1.In early development, there were not significant differences in leaf length and width except for leaf width in mean seeding rates. And there was significant difference in tillering number. Tillering number of Korean lawngrass grown in sandy clay loam soil was more abudant than that grown in sandy clay and sandy loam soils.2.The rate of ground cover of Korean lawngrass grown in sandy clay loam soil was faster than that in other soils. The ground cover rate was faster in the following order: 15, 12, 10, 7, 5, 3 kg/10a. But in sandy clay loam soil, it was showed that the plot seeded at 12kg/10a be faster than that at l5kg/10a. Plots seeded from 5 to 15kg/10a in sandy clay loam soil and 15kg/10a in sandy clay soil were showed the 100% ground cover during the period of the year seeded.3.There were not significant differences in dry weight of each part measured at 11 and l4months after seeding. But there were significant differences in dry weight of shoot and total dry weight. Total and shoot dry weight of Korean lawngrass grown in sandy clay loam soil were heavier than that in others. 4.It was revealed that the optimal seeding rate in sandy clay loam soil was 12 kg/10a. But it was suggested that the optimal seeding time and rate in each soil textures be undertaken in future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.582-587
• /
• 2015

This study was conducted to compare the plant growth and fruit quality of blueberries grown in different soil textures of Korea, in order to utilize the results for stable production and soil improvement. Rabbiteye blueberry cultivars 'Tifblue' and 'Baldwin' were planted and grown for three years from 2013 in wagner pot (1 $2000a^{-1}$) in a greenhouse of Namhae Sub-station, Institute of Horticultural and Herbal Science. The plants were grown in four soil textures, sand, sandy loam, loam and silt loam, and nutrient uptake and growth characteristics of plants were investigated. Leaf nitrogen and phosphorus contents of two cultivars grown in different soil textures ranged between 8.6 to $10.5gkg^{-1}$, which was lower than appropriate level for rabbiteye blueberry. However, the contents of potassium, calcium and magnesium in leaves were appropriate levels as $2.29{\sim}3.62gkg^{-1}$, $4.46{\sim}5.46gkg^{-1}$ and $1.45{\sim}2.12gkg^{-1}$, respectively. Nitrogen and phosphate contents in leaves were higher in the two cultivars grown in silt loam soil. There was no significant difference in plant volume and root dry weight among four soil textures in two cultivars. However, dry weight of leaves and branches were highest in loam soil. Fruit production was highest in loam and silt loam soil in two cultivars, showing negative correlation with the amount of sand in soil. However, sugar and acidity showed no correlation with sand content in soil. These results show the limit to the blueberry growth in soil that has no nutrient holding capacity; however, most of Korean soils that have good nutrient holding capacity can produce competitive fruits if the drainage is improved.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.144-150
• /
• 2006

Chemical characteristics and their interrelationships of 156 soils included by 74 sandy loam and 82 loam soils collected from plastic film house in Chungbuk area were investigated from 1998 to 2001. Seventeen chemical properties including pH, organic matter (OM), electrical conductivity (EC), inorganic nitrogen, available phosphorus, exchangeable cations, CEC, etc., were analyzed by correlation, standardized partial regression coefficient, and principal factor analysis. Standardized partial regression coefficients of chemical properties were estimated to determine the degree of contribution of EC and OM contents in soils. Principal factor analysis was applied to classify the studied chemical properties into different groups having similar chemical properties. The pH of experimental soils ranged from 4.24 to 7.14 and 4.95 to 7.35 for loam and sandy loam soils, respectively. The EC of soils varied from 0.93 to $15.65dS\;m^{-1}$ for loam and $0.91{\sim}22.30dS\;m^{-1}$ for sandy loam soils, respectively with significant differences among them. The EC measured by 1:5 $H_2O$ dilution method and saturation method were significantly related with 8.163 and 8.599 as the slopes of regression equation for loam and sandy loam soils, respectively. These slopes more than 8.0 in this regression equation was higher than the slope of 5.0 that is estimated from dilution coefficient suggesting that EC measured by 1:5 dilution method might be erratic. The standardized partial regression coefficient of different chemical properties for the estimation of EC was in the order of $NO_3{^-}$ > $Cl^-$ > OM > exchangeable Mg for loam soils and $NO_3{^-}$ > exchangeable Mg > $Cl^-$ for sandy loam soils. Contribution order of the chemical properties based on standardized partial regression coefficient differed 1:5 dilution method and saturation method, indicating that different chemical compounds might be present in the extract solutions of these two methods. Consequently the measurement of EC by saturation method was thought be still better for estimation of chemical property because accuracy of EC measurement by 1:5 dilution method can't be improved by any specific coefficient for adjustment of EC. Regardless of differences in soil textures and extraction methods, correlation coefficients between EC and the other chemical properties were routinely in the order of $NO_3{^-}$ > $Cl^-$ > degree of base saturation > exchangeable Mg > exchangeable Ca > $SO{_4}^{2-}$. The principal factor analysis revealed four factor groups of the chemical properties studied. The groups for sandy loam were as follows; ; 1. salt components, 2. soil reaction components, 3. fixed and adsorption components, 4. CEC components. The groupings of loam soils were similar to sandy loam except that exchangeable Na substituted the CEC of sandy loam.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.162-169
• /
• 2008

To determine suitable composition of nutrient solution according to soil textures in fertigation culture of cucumber using three strengths (S) of Yamasaki cucumber recipe, chemical changes of soil, growth characteristics and yield of cucumber were investigated. Electric conductivity of drainage solution was risen in all treatments, pH of loam soil was generally optimum level and that of sandy soil was high level. Photosynthetic rate in loam soil supplied the 1/2 S and transpiration rate in sandy soil supplied the 1.0 S were most low. Diffusive resistance in sandy soil supplied the 1.0 S was high. Chlorophyll contents was higher concentrations by the kinds of soil. Amount of drainage solution in sandy loam soil supplied the 1/2 S and loam soil supplied the 1.0 S were most much and little, respectively. Water absorption rate was the opposition to amount of drainage solution. Nutrient contents in soil except calcium were most high in the 1.0 S by the kinds of soil. Nutrient contents in leaves, nitrogen in sandy soil supplied 1.0 S, phosphorus in loam soil supplied 1/2 S, potassium in two soil supplied 1.0 S, calcium in loam supplied 1/2 S and sandy loam soil supplied 1.0 S, magnesium in loam soil supplied the 1/2 S was high. The growth and yield of fruit were more in loam than in sandy loam soil. Therefore, the suitable compositions of macro-nutrients for fertigation culture of cucumber were determined in loam and sandy loam soils as follows: In loam soil, they were $NO_3$-N 12.3, $NH_4$-N 1.0, P 3.0, K 5.9, Ca 5.7, Mg $3.5\;me{\cdot}L^{-1}$, whereas in sandy loam soil $NO_3$-N 11.7, $NH_4$-N 1.0, P 3.0, K 5.9, Ca 4.9, Mg $3.2\;me\;L^{-1}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.336-341
• /
• 1996

This study was conducted to investigate the effects of compost application on the soil loss and physico-chemical properties at the slope land from 1990 to 1991. Lysimeters with 15% slope. 5m slope length. 2m width and 1.2m depth were constructed in 1984 and filled with sandy loam, loam, clay loam. and clay soils. Treatments were bare soil, compost(1.5ton/10a) and non-compost with soybean-barley cropping system from 1984. Losses of soil were increased with the order of sandy loam, clay, loam and clay loam. Run-off was increased with the order of sandy loam, loam, clay loam and clay, but leachate was decreased with the same order. Compost treatments decreased 33.6-44.6% of soil loss and 17.0-24.0% of run-off but increased 17.1-33.7.% of leachate as compared with the non-compost treatments. The amount of soil loss was positively correlated with the amount of run-off by Y = 12.125+0.063X (r=$0.970^{**}$)and negatively correlated with the leachate by Y=43.425-0.096X(r=$-0.917^{**}$). The application of compost increased soil pH, OM, CEC and extractable cations. Application of compost decreased bulk density but increased porosity, water stable aggregate and available water. These results provide that the compost application plays an important role in conserving soil and water, and improving soil physico-chemical properties.

• Korean Journal of Organic Agriculture
• /
• v.21 no.1
• /
• pp.69-78
• /
• 2013

This study was carried out to evaluate nitrogen availability of applied fertilizer and to investigate yield and growth of Korean kimchi cabbage as affected by amount of fertilizer and soil fertility in organic farming applied various fertilizers in rainshelter. The head weight of Korean kimchi cabbage cultured in infertile soil (sand loam) with no amendments was very low. and that in fertile soil (clay loam) was higher than in infertile soil (sand loam). The head weight of Korean kimchi cabbage as affected by amount of fertilizer was more variable in infertile soil (sand loam) than in fertile soil (clay loam). Nitrogen availability of applied fertilizer by Korean kimchi cabbage was lower in fertile soil (clay loam) than in infertile soil (sand loam) and the lower that was, the more fertilizer applied. By application of poultry manure compost 20Mg ha-1 and natural mineral materials such as guano, phosphate rock, and potassium magnesium rock equal to amount of fertilizer recommended in conventional farming, the yield of Korean kimchi cabbage in infertile soil (sand loam) with 1% organic matter came up to 90% of the yield in fertile soil (clay loam) with 6% organic matter. Therefore natural mineral materials such as guano for N source, phosphate rock for P source, and potassium magnesium rock for K source may be able to use as environmental-friendly fertilizers in organic Korean kimchi cabbage production in highland.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.400-406
• /
• 1998

To investigate the effect of simulated acid rain on the change in soil chemical properties, simulated acid rain of different pH was applied to the three soils of different texture. Simulated acid rain of pH 4.0 and 6.0 did not greatly change the soil pH, while simulated acid rain of pH 2.0 decreased greatly the soil pH. Decrease in soil pH were in the order of sandy loam > loam > clay loam, while increase in exchangeable acidity was in the order of clay loam > loam > sandy loam. Amount of nutrients leached downward due to the penetration of simulated acid rain into the soil was in the order of Ca > K > Mg. Exchangeable Al was not detected when soil acidity dropped to pH 5 and exchangeable acidity increased within a range of CEC. A total 1200mm of simulated acid rain(pH 3.0) can load $12kg\;ha^{-1}$ of $H^+$ ion, $128kg\;ha^{-1}$ of sulfur, $56kg\;ha^{-1}$ of nitrogen. The acidity of simulated acid rain pH 3.0 can be neutralized by addition of $444kg\;ha^{-1}$ of slaked lime. The amount of leached bases were equivalent to 923, 1731 and $1608kg{\cdot}ha^{-1}$ in sandy loam, loam and clay loam soil respectively.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.7-13
• /
• 2008

The tillage depth control system is one of the most salient control system of tractor implements. A contact-type height sensor was developed to measure ground clearance for the tillage depth control. The height sensor was fabricated in this study, and its efficacy in a tillage depth control system was evaluated. Experiments were conducted in order to determine both static and dynamic detection characteristics of the height sensor using soil bin system on the sampled soil (sandy loam, sand, clay loam). The results of the static detection characteristics showed that in the case, sandy loam soil despite and clay loam soil at a wet basis moisture content of 30%, large measurement errors were observed a due to penetration of a plastic puck into the sampled soil. The results of the dynamic detection characteristics showed that the height sensor detected the distance from the ground of sandy loam soil despite the uneven nature of the ground surface and the changes in traveling speed $1km/h{\sim}5km/h$ at a wet basis moisture content of 10%.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.97-105
• /
• 2009

Analysis was done on the particle size distribution of sediments flown into Saemangeum from the Mankyung and Dongjin River. The organic pollutants and heavy metal existing in the sediments were analyzed, which was further used to study the properties of pollution in the sediments according to the particle size distribution. Conclusions shown below were made from these analyses. The particle size distribution showed a big difference between the upriver areas of Mankyung and Dongjin River. Particles under $75{\mu}m$ showed to be around 85% at Dongjin River, while it showed to be around 70% at Mankyung River. This kind of distribution in particle size concluded in greatly affecting the contamination density of the sediments. From the analysis done on the soil type of sediments, deposition in Mankyung River categorized into Silty loam and Sandy loam, where Silty loam covered most of area and deposition in Dongjin River categorized into Sand, Loamy sand, Silty loam, Sandy loam. Considering the weight ratio, the density of contamination of the sediments by particle size at Dongjin and Mankyung River has been analyzed to show that organic pollutants and heavy metals occupy more than 70% of the whole contamination in the range under the particle size of $75{\mu}m$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.170-180
• /
• 2000

The surface-drainage system, which consists of bio-swale and detention-infiltration Basins and carries out the function of temporary detention-infiltration of runoff, is defined as the "natural drainage system". It is an environmentally sound and economically beneficial practice to reduce run-off by retaining it in swales as much as possible and letting run-off infiltrate into the ground. In order to estimate appropriate capacity of swales, it is necessary to know how long will it take for certain depths of water to infiltrate. The ponding times, or infiltration times, of various depths and of various soil textures, could be estimated with the Green-Ampt Infiltration Model. Included soil textures are loamy sand, sandy loam, loam, silty loam, sandy clay loam and clay loam. Ponding depths are from 10cm to 100cm intervals. Newton-Raphson method is used for the solution of the Green-Ampt equation by a computer program. The computer program was written with the FORTRAN Developer 4.0 v.. Selected ponding depth is acceptable when the sum of the ponding time and the breeding time of mosquitoes is less than the tolerance period of innundation of grasses and trees.and trees.