• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.372-378
• /
• 2015

Growing crops under different soil textures may affect crop growth and yield because of soil N availability, soil N leaching, and plant N uptake. The objective of this study was to evaluate effects of three different soils (sandy loam, loam, and clay loam) on cucumber (Cucumis sativus L.) yield, nitrogen (N) use efficiency (NUE), and water use efficiency (WUE) by subsurface drip fertigation in the greenhouse. Three different soil textures are sandy loam, loam, and clay loam with 3 replications. The dimension of each lysimeter was $1.0m(W){\times}1.5m(L){\times}1.0m(H)$. Cucumber was transplanted on April $8^{th}$ and Aug $16^{th}$ in 2011. The subsurface drip line and tensiometer was installed at 30 and 20 cm soil depth, respectively. An irrigation with $100mg\;NL^{-1}$ concentration was automatically applied when the tensiometer reading was 10 kPa. Volumetric soil water content for cucumber cultivation was the highest in 30 cm soil depth regardless of soil texture and was lowered when soil depth was deeper. The volumetric soil water contents at soil depths of 10, 30, 50, and 70 cm were the highest at clay loam, followed by loam, and sandy loam. The growth of cucumber at the $50^{th}$ day after transplanting was the lowest at sandy loam. Cucumber fruit yields were similar for all three soil textures. The highest amount of water use at sandy loam was observed. Nitrogen and water use efficiencies for cucumber were higher for clay loam, followed by loam and sandy loam, while the amount of N leaching was the greatest under sandy loam, followed by loam, and clay loam. Overall, growing cucumber on either loam or clay loam is better than sandy loam if subsurface drip fertigation is used in the greenhouse.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.367-367
• /
• 2017

Crimson clover, a legume crop, is a landscape crop and green manure crop that can be sowing in spring and autumn. Its red flower blooms in May, and serves various roles such as landscape composition, weeds suppressing, prevention of soil loss and nutrient on sloping land and supplying nitrogen and organic matter in soil. Thus, in order to utilize this crop in agriculture land, we evaluated the growth characteristics of crimson clover cultivated in four different soil textures, sand, sandy loam, loam, and clay loam. The nitrogen content of crimson clover was 15.8 g kg-1 and C/N rate was 20.3. Its growth was good in sandy loam and loam. Its plant height was 42.5 cm in sandy loam and 49.5 cm in loamy, respectively, which are approximately 20 cm longer than the sand and clay loam. The crimson clover in sandy loam and loam bloomed about seven days earlier than those in sand and clay loam. Regarding number of flower per hill and flower length, there were no difference between soil textures. Dry weight of crimson clover was 2.5 Mg ha-1, 2.3 Mg ha-1 each in sandy loam and loam. Therefore, it was approximately 0.8 ~ 1.1 Mg ha-1 higher than dry weight of sand and sandy loam. Plant height and dry weight of crimson clover was increased late harvest time. Nitrogen contribution were higher in loam and clay loam, when it was respectively 51.3 kg ha-1, 53.5 kg ha-1. Therefore, according to flowering properties and dry weight, the growth and development of crimson clover was finest in sandy loam and loam.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.245-252
• /
• 2008

The growth characteristics and the Germanium (Ge) uptake of rice plant (Hopyungbyeo) in soil with Ge were investigated under different soil textures to obtain the basic information for agricultural utilization of Ge. This study was carried out in the Wagner pot ($15,000^{-1}a$). Ge concentration in soils such as clay loam, silt loam, loam and sandy loam for rice plant cultivation was treated at $8mg\;kg^{-1}$. The growth status of rice plant was almost similar in all soil texture, and rice yield was higher in the order of silt loam > clay loam > loam > sandy loam. In rice bran, the Ge uptakes in silt loam, clay loam, loam and sandy loam were 980, 868, 754 and $803{\mu}g\;pot^{-1}$, respectively. The Ge uptakes of brown rice and polish rice were greater in the order of silt loam > sandy loam > clay loam > loam. In silt loam, the Ge uptake rates in leaf, stem, root, rice bran and brown rice were 19.7, 2.3, 0.03, 3.1 and 0.44%, respectively. Therefore, under the given experimental condition the optimum soil texture for production of functional rice with Ge is a silt loam.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.705-711
• /
• 2016

Crimson clover, a legume crop, is a landscape crop and green manure crop that can be sowing in spring and autumn. Its red flower blooms in May, and serves various roles such as landscape composition, weeds suppressing, prevention of soil loss and nutrient on sloping land and supplying nitrogen and organic matter in soil. Thus, in order to utilize this crop in agriculture land, we evaluated the growth characteristics of crimson clover cultivated in four different soil textures; sand, sandy loam, loam, and clay loam. The nitrogen content of crimson clover was $15.8g\;kg^{-1}$ and C/N ratio was 20.3. Its plant height was 42.5 cm in sandy loam and 49.5 cm in loamy, respectively, approximately 20 cm longer than the sand and clay loam. The crimson clover in sandy loam and loam bloomed about seven days earlier than those in sand and clay loam. Regarding number of flower per hill and flower length, there were no difference among the soil textures. Dry weight of crimson clover for sandy loam and loam was $2.5Mg\;ha^{-1}$ and $2.3Mg\;ha^{-1}$, respectively, $0.8{\sim}1.1Mg\;ha^{-1}$ higher than that of sand and sandy loam. Plant height and dry weight of crimson clover increased with delaying harvest time. Nitrogen contribution in loam and clay loam was $51.3kg\;ha^{-1}$ and $53.5kg\;ha^{-1}$, respectively. Therefore, in terms of flowering properties and dry weight, the proper soil texture for the growth and development of crimson clover was sandy loam and loam.

• The Korean Journal of Mycology
• /
• v.10 no.3
• /
• pp.119-124
• /
• 1982

The characteristics of the six different agricultural soil from Michigan were as follows. Colwood and Capac soil were loam, Gilford and Ceresco were sandy clay loam, Sission was clay loam, and Spinks was sandy loam. pH of Gilford sandy clay loam was 6.6 whereas that of the soil ranged $5.4{\sim}5.9$. Gilford sandy loam found to contain a relatively higher amount of organic matters as compared to other soils. Furthermore, the numbers of bacteria in Gilford sandy clay loam were significantly higher than those in other soils. The populations of fungi in Gilford sandy clay loam and Colwood loam soils were significantly greater than those in other soils. On the other hand, the densities of actinomycetes in Gilford sandy clay loam and Ceresco sandy clay loam soils were significantly different from those in other soils. The population of anaerobic bacteria varied depending on the soils; Ceresco sandy clay loam, Capac loam, Colwood loam soils have higher numbers of bacteria, whereas Gilford sandy clay loam was very lesser than the other soils. In the $^{14}C-glucose$ respiration by soil microorganisms after 10 hrs, the respiration rate was decreasing in the order of Ceresco sandy clay loam, Spinks sandy loam, Colwood loam, Sission clay loam, Capac loam and Gilford sandy clay loam. Germination of test propagules on natural soil soil was $0{\sim}5%$, and it was germinated $90{\sim}98%$ on autoclaved soil and PDA. The propagules differed in thier germination response to nutrients added to the soils. In general, more nutrients were required to promote germination on Capac loam and Gilford sandy loam soil than Spinks sandy loam soil. Especially Mortierella n. sp. required more nutrients for germination to obtain the same ratio as Helminthosporium victoriae.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.2
• /
• pp.47-58
• /
• 1984

The study results of the mosture consumption character and irrigation effect of tomato, red pepper and chinese cabbage, in case the soil moisture is kept with different moisture content by the soil properties(loam, sandy loam, sand), are summarized as follows: 1. The available rainfall under bare soil condition had an order of sand>sandy loam> loam and their average was 64.2%. 2. Total moisture consumption under bare soil condition had an order of loam>sandy loam>sand and their average was 4.2mm. 3. The amount of irrigated water to keep certain soil moisture under bare soil condition showed minimum in sand and maximum in loam. It is considered because the capillary phenomenon was more developed in loam. 4. Total moisture consumption of tomatoes under premature cultivation showed 925mm in maximum and had on order of loam>sandy loam>sand. In the aspect of re-irrigation point, it had an order of PF 1.5> PF 1.7>PF 2.1. In case the twenty years's drought frequency was taken into account, the target amount of irrigation water meeded for premature cultivation was 916mm and its average daily moisture consumption was 10.8mm. 5. Total moisture consumption of red pepper under open cultivation showed 1145mm in maximum and had an order of loam>Sandy loam>sand. In the aspect of re-irrigation frequency was taken into consideration the target amount of irrigation water was 1,174.8mm and its average daily moisture consumption was 8.0mm. 6. Total moisture consumption of autumn chinese cabbages was 349mm in maximum and had an order of loam>sandy loam>sand. In the aspect of re-irrigation point, it had an order of PF 1.5>PF 2.1>PF 2.7. In case the twenty year's drought frequency was taken into account, the target amount of irrigation water needed for chinese cabbage cultivation was 259.5mm and its average daily moisture consumption was 6.5mm. 7. It is effective to keep the soil moisture of tomato from PF 1.5 to PF 2.1 in loam and the soil moisture control was effective in sandy loam than red pepper and chinese cabbage. In sand, the production was severaly decreased and the re-irrigation point of PF 1.5 was effective.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.51-55
• /
• 1997

Three soils, sandy loam, loam and silty clay loam, were selected and three inches soil cores with 4 bulk density(BD) levels were made by compressing the soils wetted with 3 levels water. Mechanical and water characteristics were measured and analyzed the mechanical resistance limiting water, available water and least-limiting water range. Mechanical resistance limiting water(MRLW) were appeared at higher bulk density than $1.6Mg/m^3$ in sandy loam, and $1.4Mg/m^3$ in loam and silty clay loam. The least-limiting water ranges were sharply decreased at the bulk density $1.6Mg/m^3$ in sandy loam and loam, $1.4Mg/m^3$ in silty clay loam. There were big deferences between available water contents and least limiting water ranges in finer texture and higher bulk density soils.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.4
• /
• pp.97-105
• /
• 2011

A wide diversity of liquid fertilizers and composts produced from the livestock manure in Korea is commonly applied to agricultural lands as an alternative of chemical fertilizers. However, their effects on the crop production and environmental impacts are still vague. The current study was investigated the property changes of paddy soils in sandy loam and silty loam treated with 1) control (no treatment), 2) chemicals, 3) storage liquid fertilizer and 4) SCB liquid fertilizer located in Gyeong-gi province, Korea. The chemical properties of soils in sandy loam and silty loam before the treatment were similar with the ones in the average paddy fields in Korea. Contrary to this, the amount of available phosphorus in sandy loam was higher than the one in the average paddy fields. The number of living organisms in sandy loam and silty loam treated with storage liquid fertilizer and SCB liquid fertilizer were higher than the ones in sandy loam and silty loam with no-treatment and chemicals. Significant difference (P<0.05) among the treatments and no-treatment was observed in sandy loam rather than in silty loam. The amounts of heavy metals were the highest in both sandy loam and silty loam treated with storage liquid fertilizer and SCB liquid fertilizer. The comparison of heavy metals showed that the ones in silty loam were little bit higher than sandy loam. The leaf lengths and dry weights of rices were increased over time, however, no significant difference was observed among each treament. In addition, the rice yield in sandy loam treated with SCB liquid fertilizer was higher than the ones in sandy loam. The highest rice yield was obtained from sandy loam treated with chemicals, but there was no significant difference between storage liquid fertilizer and SCB liquid fertilizer. While the rate of nutrient absorption by rices was the highest in sandy loam and silty loam treated with chemicals, there was no significant difference in sandy loam and silty loam treated with livestock liquid manure.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.399-404
• /
• 2014

Soil moisture is an important factor for the availability and circulation of nutrients in arable soil. The purpose of this study was to set thresholds moisture content on soil nitrate concentration in the solution for real-time diagnosis. Sandy loam, silt loam, and sandy loam was filled with $1.2g\;cm^{-3}$ at Wagner pots, 0, 100, and $200mg\;L^{-1}$ of $KNO_3$ was saturated. Nitrate in standard solution was recovered about 95% by passing the porous cup. Nitrate concentrations in sampling of soil solution were examined by using a porous cup. The soil solution was higher in accordance with sandy loam> silt loam> clay loam, limited water filled pore space for sampling soil solution was 33.7, 56.4, and 62.2%, respectively. Nitrate concentration in the soil solution was negligible at sandy loam and silt loam during sampling periods, which was decreased about 50~82% in clay loam compared to the initial $NO_3$-N concentration in the saturated $KNO_3$ solution. Over limitation of soil solution sampling, soil EC and $NO_3$-N content were increased with the saturated $NO_3$-N concentration, regardless of soil texture (p<0.05). Conclusively, soil solution by using a porous cup was possible, regardless of the soil texture, which was useful for the diagnosis in nitrate concentration of soil solution. However, because nitrate concentration of soil solution in a clay loam changes, it was necessary for careful attention in order to take advantage for the real-time diagnosis of nitrogen management in soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.249-255
• /
• 1995

This study was conducted to investigate the effects of some soil conditioners, such as polyacrylamide(PAM), polyvinylalcohol(PVA) and Bitumen emulsion, on aggregate formation and stability, wetting angle, sorptivity and penetrability of the soil with different textures : sand, sandy loam, loam and clay loam. A pot experiment was carried out to find out the effect of treatment on the germination and growth of lettuce with three textures : sand, sandy loam and silt loam. Soil aggregates larger than 2mm in untreated soils at dry condition were naught in sand, 45% in sandy loam, 80% in loam and 90% in clay loam. Treatments of soil conditioners tended to increase the occurrence of soil aggregate larger than 2mm, which were 20~25% in sand, 55~75% sandy loam, but not affected greatly aggragate occurence in loam and clay loam. The aggregate instability was decreased by the soil conditioner treatment. The wetting angles of the soils were greatly changed by hydrophobic of Bitumen, but those were changed slightly by PVA and PAM application. The sorptivity and penetrability data indicated that the effects of different materials on these parameters differed depending upon soil texture. Application of PVA and PAM were no effect exceptive in sand. Application of Bitumen revealed that water movement was not showed in all soils. The germination rate, root weight and top plant weight of lettuce were increased in all soils by PAM treatment as compared to untreated soils. Particularly the greater effect was occurred in sand soil than in sandy loam and silt loam. PAM increased greatly the moisture content and air phase of soils.