• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.245-253
• /
• 2017

The relative displacement of a piping system installed between isolated and nonisolated structures in a severe earthquake might be larger when without a seismic isolation system. As a result of the relative displacement, the seismic risks of some components in the building could increase. The possibility of an increase in seismic risks is especially high in the crossover piping system in the buildings. Previous studies found that an elbow which could be ruptured by low-cycle ratcheting fatigue is one of the weakest elements. Fatigue curves for elbows were suggested based on component tests. However, it is hard to find a quantitative evaluation of the ultimate state of piping elbows. Generally, the energy dissipation of a solid structure can be calculated from the relation between displacement and force. Therefore, in this study, the ultimate state of the pipe elbow, normally considered as failure of the pipe elbow, is defined as leakage under in-plane cyclic loading tests, and a failure estimation method is proposed using a damage index based on energy dissipation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.525-528
• /
• 1999

In this study, the new testing method for PSC-Beam will be proposed and performed. Transferable loading tester has many advantage compared with other testing method for PSC-Beam. Numerical analyses are performed and the results are compared with those of experimental studies for PSC-beam. Based on the results of this study, an improved testing method is usable for the assessment of load carrying capacity of PSC-Beam.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.335-341
• /
• 1998

In this study, the dynamic characteritics in various loading methods for wear tester were investigated experimentally. As for the dead-weight, the pneumatic, and the hydraulic method, the load control performance against external disturbances was estimated under the several loading conditions like the different sliding speed, the varied normal load, and the misaligument. The hydraulic loading method showed the most stable loading performance of all the loading methods in the experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.484-487
• /
• 2005

In order to get the surface characteristics of the HDI of HDD, the surface damage mechanisms must be totally understood. Particle contamination in hard disk drives is a big concern in today's magnetic recording industry since they are major sources of reliability problems. Namely upon contact with the slider or a contaminant particle, the disk may be scratched or the particles may be embedded into the disk surface. In this work, comparison of scratches was made between those found on actual hard disks and those created using a scratch tester. It was found that ramp loading method is an effective way to make similar scratches as the actual ones. From the ramp loading condition, the relationship between the pressure and the scratch track width could be identified.

• 열처리공학회지
• /
• 제12권4호
• /
• pp.294-302
• /
• 1999

Evaluation of Brinell standard hardness tester was carried out to secure its application as a national standard for Brinell hardness. Accuracies and reliabilities in load application, indenter diameter and indentation measurement were tested through evaluation of these components. The accuracies of load application for various loading conditions were within the limit of ISO and KS specifications. Errors in the indentation measurement due to the difference in personnel characters were successfully removed by utilising automatic indentation measurement system. In overall, the tester and the indentation measuring system were found to be eligible as a national standard of Brinell hardness.

• 콘크리트학회지
• /
• 제11권5호
• /
• pp.59-65
• /
• 1999

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.253-259
• /
• 2007

A new material tester has been developed to measure mechanical properties of thin film specimens at high temperature. It is useful for observing oxide film growth or local deformation on the surface, and for measuring creep strength. Main characteristics of the tester is as follows; First, high temperature is achieved by Joule heating generated by electricity passing through the specimen, which does not need to enclose the specimen by a furnace or a heating chamber. The exposed specimen enables one to observe the surface during the test. Because the overall size of the test rig is compact, the whole test rig can be placed in a chamber for environmental controlled tests. The loading device is from a level scales. Not only static load with fixed counter weight, but also variable load by moving counter weight controlled remotely can be applied for an ordinary creep test and creep-fatigue test, respectively. The detail of the construction, operation principle, and the specification are described. And also, an example of test result obtained using the creep tester is presented.

• 한국도로학회논문집
• /
• 제11권1호
• /
• pp.135-144
• /
• 2009

본 연구는 마샬 시험기를 이용하여 아스팔트 혼합물의 균열저항성을 평가할 수 있는 보다 간편하고 합리적인 측정시스템을 개발하는데 목적이 있다. 균열저항성 평가를 위한 파라메타로서 파괴에너지를 이용하였다. 마샬 시험기는 기본적으로 공시체 외부에 거치한 LVDT를 이용하여 수직변형률을 측정하는 시스템이며, 이 같은 외부 수직변형률 측정방식은 하중 스트랩 부분에서 발생하는 국부적인 변형으로 인해 측정오차를 야기할 가능성이 있다. 따라서 추가적인 계측 시스템을 설치하지 않고 기본적인 마샬 시험기를 이용하여 혼합물의 파괴에너지를 측정하기 위해서는 공시체 외부에 거치한 LVDT를 이용한 수직변형률 측정값이 파괴에너지 산정에 적용가능한지 여부를 검증하여야 한다. 이를 위해 본 연구에서는 공시체 중앙부분에서의 수평변형률과 외부에 거치한 LVDT를 이용한 수직변형률을 측정하는 두 가지 방식의 간접인장강도실험을 수행하여 그 차이를 비교 분석하였다. 실험결과, 외부 수직변형률 측정의 문제점으로 지적되었던 하중 스트랩 부분에서 발생하는 국부적인 변형은 파괴시점 이전에는 극히 적은 것으로 나타나 파괴에너지 계산에 오차를 유발하지 않음을 보여주었다. 또한 외부 수직변형률 측정의 실험변동성을 확인한 결과, 변동계수가 15% 이하로 마샬시험기를 이용한 균열저항성 평가시스템에 이용 가능함을 알 수 있었다.

• 한국측량학회지
• /
• 제27권6호
• /
• pp.711-721
• /
• 2009

본 연구에서는 철도 판형교의 변형량을 측정하기 위해, 수치근접 사진측량 기법을 제안하였다. 제안방법에 의한 변형측량의 비교를 위해 기존 재하시험 방법을 동시에 수행하였다. 그 결과, 제안방법과 재하시험에 의한 측정값 차이는 1~2mm 정도였으며, 열차의 반복하중으로 인한 I형거더의 처짐과 비틀림 현상을 동시에 파악할 수 있었다. 따라서 수치사진측량으로 I형거더의 변형측정 가능성을 확인할 수 있었으며. 이 방법은 정밀안전진단과 인력점검의 대안적 방법이 될 수 있을 것이다.

• 공업화학
• /
• 제3권1호
• /
• pp.81-87
• /
• 1992

폴리에틸렌에 아라미드단섬유를 보강시킨 복합재료를 roll mill을 사용하여 제조하였다. 섬유배향과 물리적 성질의 이방성을 주사전자현미경과 인장시험기로, 유변특성을 RDS 를 사용하여 측정하였다. 섬유의 배향은 roll 작업으로 어느 정도 이루어 졌으며, 섬유 loading 이 증가할수록 기계적강도의 이방성도 증가하였다. 섬유 loading 에 따른 복합점도의 상승은 저주파수 영역에서 뚜렷이 관찰되었으며, 특히 섬유 loading 이 작은 범위에서 현저하였다.