• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.15-22
• /
• 2008

The cdma2000 1xEV-DO system controls the data rates of mobile terminals based on a binary overload indicator from the base station and a simple probabilistic model. However, this control scheme has difficulty in predicting the future behavior of mobile terminals due to a probabilistic uncertainty and has no reliable means of suppressing the traffic overload, which may result in performance degradation of CDMA systems that have interference-limited capacity. This Paper proposes a new traffic control scheme that controls the data rates of mobile terminals effectively by predicting the future traffic load and adjusting the forward-link control channel. The proposed scheme is analyzed by modeling it as a multi-dimensional Markov process and compared with conventional schemes. The numerical results show that the maximum cell throughput of the proposed scheme is much higher than those of the conventional schemes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2010

It is difficult to predict the accurate fatigue life of the ship structure because of load uncertainty and load redistribution at the ship structure members. As one of studies for accurate evaluation and prediction of fatigue life, it is a promising way to detect the crack previously by attaching the Fatigue Indicator Sensor (FIS) at the crack prediction region. In order to predict the fatigue life of the ship structure by using FIS, it is required to know previously the crack propagation characteristics according to pre-notch shapes. In this study, we obtained the stress distribution phase, stress concentration factors and stress intensity factor of various pre-notch shapes through FEA. Additionally, we conducted the fatigue test and obtained the characteristics of crack propagation according to the pre-notch shapes through comparison between the fatigue test and the FEA. Consequently, we classified the pre-notch shape into 3 categories: Long, Medium, and Short life type. On the basis of the numerical and experimental results, the FIS can be developed.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.80-87
• /
• 2020

As the Arctic sea ice decreases due to various reasons such as global warming, the demand for ships and offshore structures operating in the Arctic region is steadily increasing. In the case of sea ice, the anisotropy is caused by the uncertainty inside the material. For most of the research, nevertheless, estimating the ice load has been treated deterministically. With regard to this, in this paper, a four-point bending strength analysis of an ice specimen was attempted using a stochastic finite element method. First, spatial distribution of the material properties used in the yield criterion was assumed to be a multivariate Gaussian random field. After that, a direct method, which is a sort of stochastic finite element method, and a sensitivity method using the sensitivity of response for random variables were proposed for calculating the probabilistic distribution of ice specimen strength. A parametric study was conducted with different mean vectors and correlation lengths for each material property used in the above procedure. The calculation time was about ten seconds for the direct method and about three minutes for the sensitivity methods. As the cohesion and correlation length increased, the mean value of the critical load and the standard deviation increased. On the contrary, they decreased as the friction angle increased. Also, in all cases, the direct and sensitivity methods yielded very similar results.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.481-493
• /
• 2009

This study was conducted to performance appraisal of Total Maximum Daily Loads (TMDLs), especially in terms of performance on development & reduction plan and water quality status of unit watershed. Because load allocations for pollution sources were predicted redundantly by uncertainty of prediction, TMDLs master plan has been frequently changed to acquire load allocation for local development. Therefore, It need to be developed more resonable prediction techniques of water pollution sources to preventing the frequent change. It is suggested that the reduction amount have to be distributed properly during the planning period. In other words, it has not to be concentrated on the specific year (especially final year of the planning period). The reason why, if the reduction amount concentrate on the final year of the planning period, allotment loading amount could not be achieved in some cases (e.g., insufficiency of budget, extension of construction duration). If the development plan was developed including uncertain developments, it is necessary to be developed reduction plan considered with them. However, some of the plans in the reduction plan could not be accomplished in some case. Because, it is not considered financial abilities of local governments. Consequently, development plan must be accomplished to avoid uncertain developments, and to consider financial assistance to support the implementation of effective plan. Water quality has been improved in many unit watersheds due to the TMDLs, especially in geum river and yeongsang/seomjin river.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.529-538
• /
• 2010

This paper presents a reliability-based topology optimization (RBTO) based on bidirectional evolutionary structural optimization (BESO). In design of a structure, uncertain conditions such as material property, operational load and dimensional variation should be considered. Deterministic topology optimization (DTO) is performed without considering the uncertainties related to the design variables. However, the RBTO can consider the uncertainty variables because it can deal with the probabilistic constraints. The reliability index approach (RIA) and the performance measure approach (PMA) are adopted to evaluate the probabilistic constraints in this study. In order to apply the BESO to the RBTO, sensitivity number for each element is defined as the change in the reliability index of the structure due to removal of each element. Smoothing scheme is also used to eliminate checkerboard patterns in topology optimization. The limit state indicates the margin of safety between the resistance (constraints) and the load of structures. The limit State function expresses to evaluate reliability index from finite element analysis. Numerical examples are presented to compare each optimal topology obtained from RBTO and DTO each other. It is verified that the RBTO based on BESO can be effectively performed from the results.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.168-180
• /
• 2018

In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.

• Environmental and Resource Economics Review
• /
• v.11 no.2
• /
• pp.211-231
• /
• 2002

This paper summarizes the results of a study that assess how a demand side management (DSM) system addresses key economic and environmental challenges facing in the Korean natural gas sector considering; ${\bullet}$ high discrepancies of seasonal consumption volume and of load factor in unmatured domestic LNG market, ${\bullet}$ unfavorable and volatile international LNG market, imposing with the contestable "take-or-pay" contract terms, ${\bullet}$ low profile of LNG and existence of market barriers against an optimal fuel mix status in the industrial energy sector. A particular focus of this study is to establish an 'extended' DSM system in the unmatured gas market, especially in industry sector, that could play a key role to assure an optimum fuel mix scheme. Under the concept of 'extended' DSM, a system dynamics modeling approach has been introduced to explore the option to maximize economic benefits in terms of the national energy system optimization, entailing different ways of commitments accounting for different DSM measures and time delay scenarios. The study concludes that policy options exist that can reduce inefficiencies in gas industry and end-use system at no net costs to national economy. The most scenarios find that, by the year 2015, it is possible to develop a substantial potential of increased industrial gas end-uses under more reliable and stable load patterns. Assessment of sensitivity analysis suggests that time delay factor, in formulating DSM scenarios, plays a key role to overcome various market barriers in domestic LNG market and provides a strong justification for the policy portfolios 'just in time' (time accurateness), which eventually contribute to establish an optimum fuel mix strategy. The study indicates also the needs of advanced studies based on SD approach to articulate uncertainty in unmatured energy market analysis, including gas.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.55-67
• /
• 2018

The objectives of this study were to monitor organic farming upland compared with conventional upland field and to evaluate nutrient loads reduction of surface cover effect with long-term historical climate data. APEX(Agricultural Policy Environmental eXtender) model was validated with experimental data and used for assessing surface cover scenarios for 30-year simulation periods. The validated values of RMSE(Root Mean Square Error), RMAE(Root Mean Absolute Error), $R^2$ and E(Nash-Sutcliffe efficiency) for runoff were 1.17-1.37 mm/day, 0.28-0.45 mm/day, 0.88-0.90 and 0.82-0.94 in two treatments, respectively. Those for water quality (nitrogen) were 0.05-0.16 kg/ha, 0.52-0.75 kg/ha, 0.67-0.72 and 0.32-0.70 in two treatments, respectively, and therefore the validated model showed good agreement with the observed runoff and nitrogen load for the study period. When decreasing the surface cover rate of organic farming field to 75%, 50%, 25%, and 0% (conventional field), average annual runoff increased by 7%, 15%, 23% and 31%, respectively. Under same condition of decreasing the surface cover rate, average annual nitrogen loads increased by 1.4 times, 1.7 times, 2.0 times, and 2.3 times compared with organic farming field, respectively. This study showed that it is possible to present an appropriate surface cover ratio to maintain conventional production and minimize nonpoint sources pollution for organic farming system, although long-term monitoring is needed to determine its effects on environmental concerns, crop competition, and other uncertainty.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.2
• /
• pp.89-99
• /
• 2019

In order to increase the seismic safety of nuclear power plant (NPP) structures, a technique to reduce the seismic load transmitted to the NPP structure by using a seismic isolation device such as a lead-rubber bearing has recently been actively researched. In seismic design of NPP structures, three directional (two horizontal and one vertical directions) artificial synthetic earthquakes (G0 group) corresponding to the standard design spectrum are generally used. In this study, seismic analysis was performed by using three directional artificial synthetic earthquakes (M0 group) corresponding to the maximum-minimum spectrum reflecting uncertainty of incident direction of earthquake load. The design basis earthquake (DBE) and the beyond design basis earthquakes (BDBEs are equal to 150%, 167%, and 200% DBE) of G0 and M0 earthquake groups were respectively generated for 30 sets and used for the seismic analysis. The purpose of this study is to compare seismic responses and seismic fragility curves of seismically isolated NPP structures subjected to DBE and BDBE. From the seismic fragility curves, the probability of failure of the seismic isolation system when the peak ground acceleration (PGA) is 0.5 g is about 5% for the M0 earthquake group and about 3% for the G0 earthquake group.