• 대한기계학회논문집A
• /
• 제41권8호
• /
• pp.703-709
• /
• 2017

본 논문에서는 재분배된 크리프 응력을 근사적으로 접근하기 위해 크리프 해석에 비해 비교적 간단한 탄성 및 탄성-소성 해석법을 사용하여 그 결과와 비교하였다. 탄성해석 결과를 이용하여 $M_{\alpha}-tangent$ method의 Primary Stress와 ASME 코드의 $P_L+P_b/K_t$를 구하였고 탄성-소성 해석 결과를 이용하여 R5 코드의 ${\sigma}^R_{ref}$ 를 구하였다. 용접 형상이 있는 십자 모양의 판 형상에 굽힘 하중, 단축인장 및 이축인장이 작용하는 경우와 r/t가 5, 20인 곡관에 굽힘 하중 및 내압이 작용하는 경우 등 여러 형상에 대한 해석을 수행하였다. 요소 민감도 확인을 위해서는 판 형상에 굽힘 하중이 가해 지는 경우 여러 요소 크기에 대한 해석을 수행하였다. 간략 해석 결과는 크리프 응력과 큰 차이를 보이지 않았지만, $M_{\alpha}-tangent$ method의 경우 요소 크기에 민감하고 ASME코드와 R5코드의 결과는 요소 크기에 민감하지 않았다.

• 농업과학연구
• /
• 제49권2호
• /
• pp.269-284
• /
• 2022

The development of radish collectors has the potential to increase radish yields while decreasing the time and dependence on human labor in a variety of field activities. Stress and fatigue analyses are essential to ensure the optimal design and machine life of any agricultural machinery. The objectives of this research were to analyze the stress and fatigue of major components of a tractor-mounted radish collector under dynamic load conditions in an effort to increase the design dependability and dimensions of the materials. An experiment was conducted to measure the shaft torque of stem-cutting and transferring conveyor motors using rotary torque sensors at different tractor ground speeds with and without a load. The Smith-Watson-Topper mean stress equation and the rain-flow counting technique were utilized to determine the required shear stress with the distribution of the fatigue life cycle. The severity of the operation was assessed using Miner's theory. All running conditions produced more than 10⁷ of high cycle fatigue strength. Furthermore, the highest severity levels for motor shafts used for stem cutting and transferring and for transportation joints and cutting blades were 2.20, 4.24, 2.07, and 1.07, and 1.97, 3.81, 1.73, and 1.07, respectively, with and without a load condition, except for 5.24 for a winch motor shaft under a load. The stress and fatigue analysis presented in this study can aid in the selection of the most appropriate design parameters and material sizes for the successful construction of a tractor-mounted radish collector, which is currently under development.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.667-671
• /
• 2010

Runs test is a mathematical tool to test the stationarity of electromyographic (EMG) signals. The purpose of this study is to investigate the effects of segmentation size on the stationarity of EMG signals in runs test. Six subjects participated in this experiment and performed isometric trunk exertions for twenty seconds at the load level of 25% and 50% MVC. The signals extracted from the erector spinae muscles were divided into the intervals of 1000ms and the stationarity of the signal in each interval was tested by the runs test. In this test, seven segmentation sizes such as 1.0, 2.0, 3.9, 7.8, 15.6, 31.3 and 62.5ms were applied. Additionally, two stationarity tests of reverse arrangements test and modified reverse arrangements test were used to verify the results of the runs test. In results, the segmentation size of 62.5ms showed the similar results with the other stationarity tests. However, the stationarity values among there tests were different each other when segmentation sizes other than 62.5ms were used. These results indicated the effect of segmentation size in runs test that needs to be considered to have consistent and sensitive result in stationarity test.

• 대한인간공학회지
• /
• 제29권2호
• /
• pp.183-188
• /
• 2010

The purpose of this study is to investigate the stationarity of the electromyographic signal in various flexion angles, loads, and window sizes, which influence the result of the mean power frequency (MPF) and median frequency (MNF) analysis. Six healthy subjects participated in the experiment. They were tested in the combination of 3-level flexion angles (0 degree, 22.5 degree, 45 degree) and 3-level loads (0Nm, 30Nm, 60Nm). Electromyographic data were collected for 20 seconds during isometric contraction. The stationarity of collected data were analyzed with four different window sizes including 250, 500, 1000 and 2000ms. Two test methods for stationarity such as Reverse Arrangements Test and Modified Reverse Arrangements Test were used. In order to show the effect of nonstationarity, the increasing/decreasing trend of MPF and MNF trend were discussed. In results, the stationarity of the electromyographic signal decreased as flexion angle increased and load decreased while window size decreased based on Reverse Arrangements Test. The highest stationarity was shown at 500 ms window in Modified Reverse Arrangements Test. The inclination of MNF and MPF indicated 3.6-6.3%, 3.8-5.1% discrepancy compared to the result from stationary data.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권3호
• /
• pp.225-229
• /
• 1990

Sixteen mature sheep were fed chaffed orchardgrass hay once a day. Jaw movement of the sheep was recorded for 24 hours before slaughter. Four sheep were slaughtered either prior to eating, 2, 8 or 16 hours after the commencement of eating to measure digesta pool size and particle size distribution in the reticulo-rumen. Eating time was restricted to 120 minutes. Rumination time and actual chewing time during rumination increased with time after the meal. Mean dry matter (DM) pool size before and 2 hours after the meal were 1.36 and 2.45 times of DM intake, respectively. The proportion of large particle (>1.18 mm; LP) in the DM ingested during the meal was caculated to be about 70%. The mean DM and LP pool sizes per DM intake and the mean proportion of LP in the DM pool decreased with time after the meal. There were close negative relationships between either DM or LP pool sizes per DM intake and the chewing activities either expressed as time spent rumination, actual chewing time during rumination or total actual chewing time(total of eating time and actual chewing time during rumination). The difference between DM intake and LP pool size were assumed to be LP degradation in the present experiment, and correlated positively with the chewing activities. A large proportion of the digesta load was comprised of small particles, in excess of the daily intake.

• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.25-31
• /
• 2016

Gaskets are usually used for the sealing of flange joints. The joint is usually composed of two flanges, a ring gasket and clamping bolts. The metal ring gasket is suitable for pipe flanges, pumps and valve joints in high temperature and high pressure environments. A very high surface stress is developed between a ring type joint gasket and the flange groove when the ring type joint is bolted up in a flange. The dimensions of flanges and ring joint gaskets for the pipe sizes that are in common use are specified in the ANSI codes. However, sometimes it is necessary to make a new design for the flange joint which is not specified in the codes, as the equipment is getting larger and larger in size. This paper presents the contact behavior of Class 600 ring joint gaskets with oval and octagonal cross sections. Five different sizes of gaskets are employed in the analysis, and one of them is newly designed on the basis of analysis results obtained from existing models. Three load steps are used to find the stress, stain and contact pressure etc., and to compare the contact characteristics among the models due to the bolt clamping force and the working surface pressure. ANSYS Workbench version15 is used to conduct the finite element analysis.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권9호
• /
• pp.434-441
• /
• 2003

This paper deals with the temperature characteristics according to the cooling medium and the duct size in model transformers. For the analysis and the temperature-rise tests, two 400kVA model transformers have been manufactured. One has been filled with the alpha oil as the cooling medium and constructed the duct sizes of $3\textrm{mm}$ and $5\textrm{mm}$ in the low-voltage and high-voltage windings respectively. The other has been filled the beta oil and the duct sizes were $4\textrm{mm}$ and $6\textrm{mm}$. The temperature-rise tests have been performed by the back-to-back method and the load factor has been controlled the range of 90%∼130%. The temperature values have been measured by the thermocouple and from the sixteen points in each transformer. A commercial CFD program "FLUENT" has been used for the analysis of temperature distribution. The geometry of transformer has been modeled to 3-dimensional by using the hybrid calculation mesh including the radiator. And also, the natural convection velocity has been measured at the oil top position, and compared with the calculated results.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.1-7
• /
• 2022

This paper aims to compare the mean object size of M/G/1/PS model with that of M/BP/1 model used in the web service. The mean object size is one of important measure to control and manage web service economically. M/G/1/PS model utilizes the processor sharing in which CPU rotates in round-robin order giving time quantum to multiple tasks. M/BP/1 model uses the Bounded Pareto distribution to describe the web service according to file size. We may infer that the mean waiting latencies of M/G/1/PS and M/BP/1 model are equal to the mean waiting latency of the deterministic model using the round robin scheduling with the time quantum. Based on the inference, we can find the mean object size of M/G/1/PS model and M/BP/1 model, respectively. Numerical experiments show that when the system load is smaller than the medium, the mean object sizes of the M/G/1/PS model and the M/BP/1 model become the same. In particular, when the shaping parameter is 1.5 and the lower and upper bound of the file size is small in the M/BP/1 model, the mean object sizes of M/G/1/PS model and M/BP/1 model are the same. These results confirm that it is beneficial to use a small file size in a web service.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권7호
• /
• pp.665-674
• /
• 2000

높은 캐쉬 구역성을 나타내는 데이터 병렬 프로그램들에서 그레인 크기의 선정은 캐쉬 성능에 커다란 영향을 마친다. 선택된 그레인 크기가 프로세서들 사이에 균등한 부하 배분을 제공하더라도 내재하는 캐쉬 효과를 무시한 그레인 크기는 하나의 프로세서에 할당된 그레인들 사이에 주소 간섭을 발생되게 한다. 이런 주소 간섭은 캐쉬 충돌 실패를 발생하기 때문에 캐쉬 구역성에 부정적 영향을 미치게 된다. 이러한 문제점을 해결하기 위해서 본 논문에서는 직접 사상 캐쉬의 특정을 바탕으로 캐쉬 크기와 프로세서 개수들로부터 최적 그레인 크기를 유도한다. 제안된 방법은 캐쉬 공간 내에서 그레인들이 동일한 주소로 사상 되지 않게 하므로 캐쉬 충돌 실패를 감소시킨다. 모의 시험 결과는 제안된 최적 그레인 크기는 직접 사상 캐쉬상에서 캐쉬 실패를 줄이므로 시험된 데이터 병렬 프로그램들의 성능을 개선시킴을 보인다.

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.224-228
• /
• 2016

PURPOSE. This study aimed to investigate whether dentin surface preparation with diamond rotary instruments of different grit sizes affects the shear bond strength of resin-bonded restorations. MATERIALS AND METHODS. The buccal enamel of 60 maxillary central incisors was removed with a low speed diamond saw and wet ground with silicon carbide papers. The polished surfaces of the teeth were prepared with four groups of rotary diamond burs with super-coarse (SC), coarse (C), medium (M), and fine (F) grit sizes. Following surface preparation, 60 restorations were casted with nickel-chromium alloy and bonded with Panavia cement. To assess the shear bond strength, the samples were mounted on a universal testing machine and an axial load was applied along the cement-restoration interface at the crosshead speed of 0.5 mm/min. The acquired data was analyzed with one way ANOVA and Tukey post hoc test (${\alpha}=.05$). RESULTS. The $mean{\pm}SD$ shear bond strengths (in MPa) of the study groups were $17.75{\pm}1.41$ for SC, $13.82{\pm}1.13$ for C, $10.40{\pm}1.45$ for M, and $7.13{\pm}1.18$ for F. Statistical analysis revealed the significant difference among the study groups such that the value for group SC was significantly higher than that for group F (P<.001). CONCLUSION. Dentin surface roughness created by diamond burs of different grit sizes considerably influences the shear bond strength of resin bonded restorations.