• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1889-1900
• /
• 1995

In this study, a large deflection analysis of a plane frame composed of a thin-walled tube in investigated. When bent, a thin-walled tube is usually controlled by local buckling and subsequent bending collapse of the section. So load resistance reaches the yield level in a thin-walled rectangular tube. This relationship can be divided into three regimes : elastic, post-buckling and crippling. In this paper, this relationship is theoretically presented to be capable of describing nonlinearities and a stiffness matrix is derived by introducing a compound beam-spring element. A numerical analysis uses a constant incremental energy method and the solution is obtained by modifying stiffness matrix at elastic/inelastic stage. This analytical results, load-deflection paths show a good agreement with the test results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.414-435
• /
• 2017

As network adaptive streaming technology becomes increasingly common, transport protocol also becomes important in guaranteeing the quality of multimedia streaming. At the same time, because of the appearance of high-quality video such as Ultra High Definition (UHD), preventing buffering as well as preserving high quality while deploying a streaming service becomes important. The Internet Engineering Task Force recently published Multipath TCP (MPTCP). MPTCP improves the maximum transmission rate by simultaneously transmitting data over different paths with multiple TCP subflows. However, MPTCP cannot preserve high quality, because the MPTCP subflows slowly increase the transmission rate, and upon detecting a packet loss, drastically halve the transmission rate. In this paper, we propose a new multipath congestion control scheme for high-quality multimedia streaming. The proposed scheme preserves high quality of video by adaptively adjusting the increasing parameter of subflows according to the network status. The proposed scheme also increases network efficiency by providing load balancing and stability, and by supporting fairness with single-flow congestion control schemes.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.375-380
• /
• 2011

Loading/unloading at sea is necessitated as larger container ships are being used. It is also unavoidable to load/unload at sea during military operations. An experimental cable array robot system, which can be used for loading/unloading at sea, consisting of four cables operated by four motors is designed and built. Even though it has simple structure, it has a large pay-load/robot-weight ratio, flexibility and wide workspace and can be easily built at low cost. In order to plan and control the paths of end-effector, two interpolation methods are introduced and compared. Since the robot is entirely based on cable tension, an analysis of tension is also presented for monitoring and planning purpose.

• Journal of Power Electronics
• /
• v.3 no.1
• /
• pp.24-32
• /
• 2003

The commutation and control in matrix converters is more complicated as in voltage source converters. Natural freewheeling paths do not exist and the theoretic absent storage elements result in a direct coupled system of load and line currents as well as voltages. The paper offers an overview about staggered commutation and control policies in matrix converters. Based on the knowledge about load current direction and the signs of the line to line input voltages different multi-step commutation policies were derived. This paper examines the application of that policies in the case of space vector modulation and direct control methods with the focus on the resulting effects to the reference output voltage deviation.

• Steel and Composite Structures
• /
• v.13 no.2
• /
• pp.157-169
• /
• 2012

Shell structures are very interesting from the design point of view and these are well recognized in the scientific literature. In this paper the analysis of the buckling loads and stability paths of a sandwich conical shell with unsymmetrical faces under combined load based on the assumptions of moderately large deflections (geometrically nonlinear theory) is considered and elastic-plastic properties of the material of the faces are taken into considerations. External load is assumed to be two-parametrical one and it is assumed that the shell deforms into the plastic range before buckling. Constitutive relations in the analysis are those of the Nadai-Hencky deformation theory of plasticity and Prandtl-Reuss plastic flow theory with the H-M-H (Huber-Mises-Hencky) yield condition. The governing stability equations are obtained by strain energy approach and Ritz method is used to solve the equations with the help of analytical-numerical methods using computer.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.65-74
• /
• 2021

This study aims to assess the effect of postulated seismic loads on the structural integrity of a spent nuclear fuel dry storage facility. Firstly, three-dimensional modal and response spectrum analyses were carried out. With regard to the latter analysis, the effect of incident angles against two horizontal and one vertical response spectra was also considered. Results showed that even though two critical locations were predicted at the longitudinal axis central part of upper flow path as well as the end discontinuity part of upper and lower flow paths connector, their maximum principal stress values were less than the tensile strength. Moreover, since the influence of vertical angle was 87% higher than that of horizontal angle in particular, which should be carefully handled to demonstrate integrity of the facility.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.515-532
• /
• 2016

The elastoplastic response of functionally graded material (FGM) beams resting on a nonlinear elastic foundation to an eccentric axial load is investigated by using the finite element method. The FGM is assumed to be formed from ceramic and metal phases with their volume fraction vary in the thickness direction by a power-law function. A bilinear elastoplastic behavior is assumed for the metallic phase, and the effective elastoplastic properties of the FGM are evaluated by Tamura-Tomota-Ozawa (TTO) model. Based on the classical beam theory, a nonlinear finite beam element taking the shift in the neutral axis position into account is formulated and employed in the investigation. An incremental-iterative procedure in combination with the arc-length control method is employed in computing the equilibrium paths of the beams. The validation of the formulated element is confirmed by comparing the equilibrium paths obtained by using the present element and the one available in the literature. The numerical results show that the elastoplastic post-buckling of the FGM beams is unstable, and the post-buckling strength is higher for the beams associated with a higher ceramic content. Different from homogeneous beams, yielding in the FGM beam occurs in the layer near the ceramic layer before in the layer near metal surface. A parametric study is carried out to highlight the effect of the material distribution, foundation support and eccentric ratio on the elastoplastic response of the beams.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.114-121
• /
• 2008

Multi-path routing has been studied widely in wired networks. Multi-path routing is known to increase end-to-end throughput and provide load balancing in wired networks. However, its advantage is not obvious in wireless multi-hop network because the traffic along the multiple paths may interfere with adjacent paths. In the paper, we introduce a new multi-path routing scheme, Cluster-Based Multi-Path Routing for multi-hop wireless networks. The main idea of the proposed routing scheme is to extend the hop-by-hop multi-path to a cluster-by-cluster multi-path. In cluster network, each cluster can work independently from other clusters and hence reduce interference. The purpose of the proposed scheme is to find a less interfering path for wireless multi-hop networks. We also showed the throughput improvement of the proposed scheme through simulations.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.595-607
• /
• 2004

Networks often evolve to provide a host with multiple access points to the Internet. In this paper, we propose a transport layer load distribution mechanism utilizing the multiple network interfaces simultaneously. We specifically propose an extension of Stream Control Transmission Protoco1 (SCTP) to have load sharing over multiple network interfaces. We named the particular service provided by the Proposed load sharing mechanism to be LS (Load Sharing) mode service. LS mode service is based on the following four key elements: (i) the separation of flow control and congestion control, (ii) congestion window based striping, (iii) redundant packet retransmission for fast packet loss recovery, (iv) a novel mechanism to keep track of the receiver window size with the SACKS even if they arrive out-of-order. Through simulations, it is shown that the proposed LS mode service can aggregate the bandwidth of multiple paths almost ideally despite of the disparity in their bandwidth. When a path with a delay of 100% greater is utilized as the second path, the throughput is enhanced about 20%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.215-221
• /
• 2012

To address the bottleneck problem in data center networks, there have been several proposals for network architectures providing high path-diversity. In devising new schemes to utilize multiple paths, one must consider the effects on TCP performance because packet reordering can make TCP perform poorly. Therefore most schemes prevent packet reordering by sending packets through one of multiple available paths. In this study we show that packet reordering does not occur severely enough to have a significant impact on TCP performance when scattering packets through all available paths between a pair of hosts in Fat-Tree. Simulation results imply that it is possible to find a low-cost solution to the TCP performance problem for Fat-Tree-like topologies.