• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.51-59
• /
• 2003

Real-Time applications on Grid environment have several problems in terms of resource management addressed as follows; (1) dynamic resource allocation to provide QoS objectives, (2) heterogeneous resources that is different scale, or capacity in same unit, and (3) resource availability, and resource needs. This paper describes the techniques of resource manager (RM) handling above problems to support QoS of dynamic real-time applications on Grid. The contributions of this paper to solve problems are as follows: unification of dynamic resource requirements among heterogeneous hosts, control of resources in heterogeneous environments, and dynamic load balancing/sharing. Our heuristic allocation scheme works not only 257% better than random, 142% better than round robin, and 36.4% better than least load in QoS sensitivity, but also 38.6% better than random, 28.5% better than round robin, and 31.6% better than least load in QoS.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.35-41
• /
• 1995

This paper proposes an adaptive methodology for setting of the underfrequency relays that is based on the initial rate of change of the frequency decline to protect for excess frequency decline of power system under large generator outage. The strategy of the load shedding is as follows : Let the load shedding of the first step occur when the frequency reaches 59.5 (Hz), and the load shedding power of this first and second step be one half of the total "Static Load Shed" value for any given disturbance size based on the initial rate of change of the frequency. As a results, it is verified that the use of the proposed method is more efficient than the conventional method in the characteristic of the frequency recovery. recovery.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.217-219
• /
• 2006

4G mobile networks are expected to support various multimedia services over IP networks and also satisfy high spectral efficiency requirement. In cellular systems including 4G networks, hotspot cells can occur when available wireless resources at some location are not enough to sustain the needs of users. The hotspot cell can potentially lead to blocked and dropped calls, which can deteriorate the service quality for users. In a 4G mobile network, a band of users enjoying multimedia services can move around, which may generate heavy flows of traffic load. This situation can generate the hotspot cell which has a short life span of only a few minutes. In this paper, we propose a handover-based scheme which can effectively manage hotspot cells in 4G mobile networks. With the scheme, the current serving cell can recognize the load status of the target cell in advance before handover execution. Adaptive handover time control according to the amount of traffic load of cells can effectively and flexibly manage the hotspot cell in the network. And, through our hotspot cell management scheme, acceptable service quality can be supported as users continuously maintain connections with the network. In the simulation results, we find that our scheme generates smaller number of hotspot cells and supports higher service quality than the compared schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3551-3567
• /
• 2016

The Low Earth Orbit satellite network has the unique characteristics of the non-uniform and time-variant traffic load distribution, which often causes severe link congestion and thus results in poor performance for delay-sensitive flows, especially when the network is heavily loaded. To solve this problem, a novel adaptive routing algorithm, referred to as the delay-oriented adaptive routing algorithm (DOAR), is proposed. Different from current reactive schemes, DOAR employs Destination-Sequenced Distance-Vector (DSDV) routing algorithm, which is a proactive scheme. DSDV is extended to a multipath QoS version to generate alternative routes in active with real-time delay metric, which leads to two significant advantages. First, the flows can be timely and accurately detected for route adjustment. Second, it enables fast, flexible, and optimized QoS matching between the alternative routes and adjustment requiring flows and meanwhile avoids delay growth caused by increased hop number and diffused congestion range. In addition, a retrospective route adjustment requesting scheme is designed in DOAR to enlarge the alternative routes set in the severe congestion state in a large area. Simulation result suggests that DOAR performs better than typical adaptive routing algorithms in terms of the throughput and the delay in a variety of traffic intensity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.81-90
• /
• 2000

Parallel manipulator is suitable for the high precise task because it than has higher stiffness, larger load capacity and more excellent precision, due to the closed-lop structure, than serial manipulator. But the controller design for parallel manipulator is difficult because the parallel manipulator has both the complexity of structure and the interference of actuators. The precision improvement of parallel manipulator using a classical linear control scheme is difficult because the parallel manipulator has the tough nonlinear characteristics. In this paper, firstly, the kinematic analysis of a parallel manipulator used at the experiments is performed so as to show the controllability. The analysis of internal singular configuration of the workspace is performed using the kinematic isotropic index so a sto show the limitation of control performance of a simple linear controller with fixed control gains. Secondly, a control scheme is designed by using an adaptive fuzzy logic controller so that active joints of the parallel manipulator track more precisely the desired input trajectory. This adaptive fuzzy logic controller so that active joints of the parallel manipulator track more precisely the desired input trajectory. This adaptive fuzzy logic controller is often used for the control of nonlinear system because it has both the inference ability and the learning ability. Lastly, the effeciency of designed control scheme is demonstrated by the real-time control experiments with IBM PC interface logic H/W and S/W of my won making. The experimental results was a success.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2563-2568
• /
• 2013

Recently, various solutions to support explosively growing mobile data traffic have attracted intensive attentions. However, the range of spectrum which can be exploited for mobile communications is very limited. Small cell networks are actively investigated because they can efficiently offload mobile data traffic from macro cells without using additional spectrum. In this paper, we developed a system-level simulator considering small cell networks in the indoor environments. We compare the performance of outage probability when a load-balancing algorithm is utilized or not. We can reduce the outage probability of congested BS with the load-balancing algorithm. In addition, overall outage probability of whole wireless systems can be reduced by using the proposed load-balancing algorithm.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.3
• /
• pp.95-106
• /
• 2000

The load frequency control of power system is one of important subjects in view of system operation and control. That is even though the rapid load disturbances were applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow one on each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation were given, the unstable phenomenal of power system can be often brought out because of the large frequency deviation and the unsuppressible power line one. Therefore, it is desirable to design the robust neuro-fuzzy controller which can stabilize effectively the given power system as soon as possible. In this paper the robust neuro-fuzzy controller was proposed and applied to control of load frequency over multi-area power system. The architecture and algorithm of a designed NFC(Neuro-Fuzzy Controller) were consist of fuzzy controller and neural network for auto tuning of fuzzy controller. The adaptively learned antecedent and consequent parameters of membership functions in fuzzy controller were acquired from the steepest gradient method for error-back propagation algorithm. The performances of the resultant NFC, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the load frequency control of multi-area power system, when the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbances of internal parameters and external stepwise load stepwise load changes, the superiorities of the proposed NFC in robustness and adaptive rapidity to the conventional controllers were proved.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.11
• /
• pp.549-560
• /
• 2001

Cluster system provides attractive scalability in terms of compution power and memory size. With the advances in high speed computer network technology, cluster systems are becoming increasingly competitive compared to expensive MPPs (massively parallel processors). Load balancing is very important issue since an inappropriate scheduling of tasks cannot exploit the true potential of the system and can offset the gain from parallelization. In parallel processing program, it is difficult to predict the load of each task before running the program. Furthermore, tasks are interdependent each other in many ways. The dynamic load balancing algorithm, which evaluates each processor's load in runtime, partitions each task into the appropriate granularity and assigns them to processors in proportion to their performance in cluster systems. However, if the communication cost between processing nodes is expensive, it is not efficient for all nodes to attend load balancing process. In this paper, we restrict a processor that attend load balancing by the communication cost and the deviation of its load from the average. We simulate various models of the cluster system with parameters such as communication cost, node number, and range of workload value to compare existing load balancing methods with the proposed dynamic algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.980-989
• /
• 2002

In this paper, we have proposed the sectorization method of the adaptive sector antenna and the new receiver structure for the CDMA wireless multi-media communication which uses multi-code and single-code. The sectorization and average BER performance of the adaptive sector antenna, which employs the proposed sectorization method, are obtained through simulation. The simulation results have shown that the sizes of sectors are properly controlled according to the distribution of the load and that the BER performance of the adaptive sector antenna is enhanced much more than that of the fixed sector antenna. Also, we have proposed two receivers, which are different from the positions to detect multi-code signals, for the multi-media communication. Each receiver has a simple cancellation scheme and two adaptive sector antennas, which are called the 1st adaptive sector antenna and the 2nd adaptive sector antenna, respectively. In this paper, the average BER performances of the receivers are compared through simulation. As the results of the simulation, we have recognized that all user' BER performances are greatly dependent on the positions to detect the multi-code signals. When we consider both system complexity and terget BERs of signals, we have concluded that the receiver, which detect multi-code signals in the 1st and the 2nd adaptive sector antenna, is appropriate for the CDMA wireless multi-media communication systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.389-395
• /
• 2013

Ethernet is the most widely deployed access network protocol around the world. IEEE 802.3az WG released the EEE standard based on LPI mode to improve the energy efficiency of Ethernet. This paper proposes improved adaptive power control mechanism that can enhance energy-efficiency based on EEE from small Ethernet switch. The feature of this mechanism is that it predicts the traffic characteristic of next cycle by measuring the amount of traffic flowing in during certain period and adjusts the optimal threshold value to relevant traffic load. Performance evaluation results indicate that the proposed mechanism improves overall performance compared to traditional mechanism, since it significantly reduces energy consumption rate, even though average packet delay increases a little bit.