• Geomechanics and Engineering
• /
• v.1 no.2
• /
• pp.143-154
• /
• 2009

Many factors influence occurrences of rock burst in coal mines, such as mining methods, control methods of the coal roof, lithological characteristics of the roof and floor, tectonic stress, groundwater and so on. Among those factors, lithological characteristics in the roof are the intrinsic controlling factors that affect rock burst during coal mining. Tangshan colliery is one of the coal mines that have suffered seriously from rock bursts in China. In this paper, based on the investigating the lithological characteristics of coal roofs and occurrence of rock bursts in Tangshan colliery, a numerical method is used to study the influence of roof lithological characteristics on rock burst potential. The results show that the lithological characteristics in the roof have an important impact on the distributions of stresses and elastic strain energy in coal seams and their surrounding rocks. Occurrences of rock bursts in this colliery have a close correlation with the thick-bedded, medium- to fine-grained sandstones in the roof. Such strata can easily cause severe stress concentration and accumulate enough energy to trigger rock bursts in the working face during mining operations.

• Korean Journal of Remote Sensing
• /
• v.35 no.4
• /
• pp.535-544
• /
• 2019

This study demonstrated the ability of a Landsat-8 OLI multispectral data to identify and delineate hydrothermal alteration zones around auriferous prospects within the crystalline basement, North-western Nigeria. Remote sensing techniques have been widely used in lithological, structural discrimination and alteration rock delineation, and in general geological studies. Several artisanal mining activities for gold deposit occur in the surrounding areas within the basement complex and the search for new possible mineralized zones have heightened in recent times. Systematic Landsat-8 OLI data processing methods such as colour composite, band ratio and minimum noise fraction were used in this study. Colour composite of band 4, 3 and 2 was displayed in Red-Green-Blue colour image to distinguish lithologies. Band ratio ${\frac{4}{2}}$ image displayed in red was used to highlight ferric-ion bearing minerals(hematite, goethite, jarosite) associated with hydrothermal alteration, band ratio ${\frac{5}{6}}$ image displayed in green was used to highlight ferrous-ion bearing minerals such as olivine, amphibole and pyroxenes, while ratio ${\frac{6}{7}}$ image displayed in blue was used to highlight clay minerals, micas, talc-carbonates, etc. Band rationing helped to reduce the topographic illumination effect within images. The result of this study showed the distribution of the lithological units and the hydrothermal alteration zone which can be further prospected for mineral reserves.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.03a
• /
• pp.139-145
• /
• 2005

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.459-472
• /
• 2015

Weathering hollows which develop on various rocks are the terrain whose lithological characteristics and formation of the bed rock is under active discussion. The shore in Dapyeong-ri, Sacheon-si has alternation of strata of pelite and sandstone, and the weathering hollows develop on the shore platform and the sea cliff where sandstone is exposed. To analyze the development characteristics of weathering hollows by development of joints, interpenetration of veins and physical and chemical features of the stone, the study conducted a topographic investigation, XRD analysis and an observation using a polarizing microscope. As the result of the investigation and analysis, tafoni and gnamma are spread in the same area and new tafoni is being formed as the existing weathering hollows are destroyed by the expansion and growth of the joint. The vein, which was found to be a quartz vein, may accelerate the development of weathering hollows combining with the joint but may also hamper their growth if the veins are penetrating perpendicularly. It is generally known that weathering hollows develop regardless of the type of rocks, however, the analysis on the lithological features show that the development is limited on the fractured and broken rocks.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.647-659
• /
• 2023

This study is to analyze the lithological similarities between railing stones of Gwanghwamun Woldae and stone blocks stored in Donggureung Royal Tombs, Guri, to interpret the provenance of the stones, and to suggest the most suitable quarry for a new stones supply among the rocks in the Seoul-Pocheon area in order to select stones for the restoration of the Gwanghwamun Woldae. The railing stones in Donggureung are medium to coarse-grained pink biotite granite, and their lithological characteristics, magnetic susceptibility(Average 5.20 ×10^-3 SI unit), and gamma spectrometer data(K 5.00~6.38%, U 4.92~8.56 ppm, Th 27.60~36.44 ppm) show similarities with the remaining railing stones in Gwanghwamun Woldae(Average 5.38). Therefore, the railing stones in Donggureung can be reused for the restoration of Gwanghwamun Woldae. They have similar lithological and geochemical charateristics to the pink biotite granite found the Suraksan Mt. and Buramsan Mr. areas in Seoul, suggesting that these areas are the source of the stone. However, since the Suraksan Mt. and Buramsan Mt. areas are currently unavailable for quarrying, lithological and geochemical analyses on granite from the Yangju and Pocheon areas are conducted to determine the suitability of the new stone for restoration. As a result, a pink biotite granite similar to the Woldae stones was identified in the Pocheon area, and it is suggested that the stones similar in grain size and colour to the railing stones of Gwanghwamun Woldae should be selected and used for the restoration of Gwanghwamun Woldae.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2013

We conducted the airborne magnetic and radiometric survey for the characterization of the black shale related and pyrometamorphic uranium deposits distributed in Geumsan area. For the successful characterization of the uranium deposits, the general geological and structural geological features were investigated based on the lithological and linear feature analysis to individual magnetic and radiometric data as the first step. Lithological analysis from the magnetic reduction to the pole and downward continuation map revealed that prominent positive anomalies caused by black and dark gray slate member were clearly recognized as magnetic sources. These results indicate that magnetic survey, even though it is not a direct method for the detection of uranium, can be a useful tool in uranium detection. By the linear feature analysis based on 2nd vertical derivative and curvature map, two linearments corresponded the gray hornfels and black slate member were extracted and in succession, the additional uranium potential zone was inferred. Final discrimination whether uranium-rich or not was confirmed by radiometric and uranium anomaly map. From these analysis, we finally concluded that uranium deposit originated by pyrometamorphic process was confined near the intrusive area only. On the contrary, it was found that black shale related uranium deposit is distributed and extended through out the entire survey area with south-west to north-east direction. In addition, from the linear feature analysis based on radiometric total anomaly map, the typical discontinuous characteristics were recognized in areas where uranium-contained linearments cross the faults. From the above discussion, we concluded that airborne magnetic and radiometric survey are complementary to each other. So it is preferable to carry out simultaneously for the efficient data processing and fruitful interpretation.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.43-53
• /
• 2012

Stability of cut-slope, the orientation and dimension of which are gradually changed, has been analyzed by employing the cross-section method capable of comprehensibly considering the lithological, structural and mechanical characteristics of slope rock. Lithological fragility is investigated by inspecting the drilled core logs and BIPS image has been taken to delineate the rock structure. Engineering properties of drilled-core including the joint shear strength have been also measured. Potential failure modes of cut-slope and failure-induced joints are identified by performing the stereographic projection analysis. Traces of potential failure-induced joints are drawn on the cross-section which depicts the excavated geometry of cut-slope. Considering the distribution of potential plane failure-induced joint traces blocks of plane failure mode are hypothetically formed. The stabilities and required reinforcements of plane failure blocks located at the different excavation depth have been calculated to confirm the applicability of the cross-section method for the optimum cut-slope design.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.299-310
• /
• 2016

The Stele for Buddhist Monk Wonjong at Godalsa Temple Site was destroyed a long time ago. Only the tortoise-shaped pedestal and the ornamental capstone in the form of a hornless dragon remain at the site and the broken stele body is stored at the National Museum of Korea today. The stele is made of two kinds of rocks that are coarse-grained biotite granite for the pedestal and the capstone, and fine-grained biotite granite including hornblende assemblages and feldspar phenocrysts for the stele body. The coarse-grained biotite granite of the pedestal and capstone showed same magnetic susceptibility and lithological characteristics with biotite granite outcrops in Yeoju area, whereas the fine-grained granite of the stele body did not. To find a provenance of the stele body stone, we investigated Korean granites in terms of magnetic susceptibility, lithology and old recordings about construction process of the stele. As a result, Haeju granite is the most likely to be a cognate rock of the stele body stone as it has same texture and lithological characteristics like color, hornblende assemblages, mineral composition and magnetic susceptibility. It is imported from Haeju (North Korea) to South Korea via China commercially, and the most suitable for a replica stone of the stele body.

• Geophysics and Geophysical Exploration
• /
• v.17 no.2
• /
• pp.49-57
• /
• 2014

3D magnetic inversion, based on the assemblage of 2D forward modeling and inversion as a practical technique to reflect the a priori information, was conducted to investigate the spatial distribution features of black-shale related and pyrometamorphic uranium deposit and several lithological units of Ogcheon Super Group in an area of Geumsan. By using the 3D visualization technique with suitable susceptibility interval and horizontal slice map, the spatial distribution of magnetic susceptibility corresponded to the black shale related uranium bearing lithological units, Black Slate member was well coincided with a information of uranium deposit. Also, even though it is indirect indicator for the detetction of uranium deposits interbedded in Gray Hornfels member, spatial susceptibility distribution which shows the south-east magnetic linearment corresponding to the Majeon-ri formation and Dark Gray Slate were matched well. From this investigation, we inferred that maximum depth extension which Black Slate member can be separately recognized with respect to adjacent Dark Gray Slate with strong magnetic susceptibility anomaly is about 150m with reference elevation level of 306m. In addition, Majeon-ri formation located south of Black Slate member revels relatively high magnetic susceptibility range but shows high spatial susceptibility fluctation. And, as an intrusive rocks, Jurassic Biotite Granite shows relatively low magnetic susceptibility characteristics. On the contrary, Cretaceous granite distributed in soutthern part of the study area shows the relatively high susceptibility distribution.

• Korean Journal of Remote Sensing
• /
• v.8 no.2
• /
• pp.105-123
• /
• 1992

A study was made on the feature extraction for non-metallic one deposits and their related geology using the Remote Sensing and Airborne Radiometric data. The area chosen is around the Haenam area, where dickite and Quarzite mines are distributed in. The geology of the area consists mainly of Cretaceous volcanics and PreCambrian metamorphic. The methods applied are study on the reflectance characteristics of minerals and rocks sampled in the study area, and the feature extraction extraction of histogram normalized images for Landsat TM and Airborne Radiometric data, and finally evaluation of applicability of some useful pattern recognition techniques for regional lithological mapping. As a result, reflectances of non-metallic minerals are much higher than rock samples in the area. However, low grade dickites are slightly higher than rock samples, probably due to their greyish colour and also their textural features which may scatter the reflectance and may be capable of capturing much hychoryl ions. The reflectances of rock samples may depend on the degree of whiteness of samples. The outcrops or mine dumps in the study area were most effectively extracted on the histogram normalized image of TM Band 1, 2 and 3, due to their high reflectivity. The Masking technique using the above bands may be the most effective and the natural colour composite may provide some success as well. The colour composite image of PCA may also be effective in extracting geological features, and airborne radiometric data may be useful to some degree as an complementary tool.