• Mass Spectrometry Letters
• /
• v.5 no.2
• /
• pp.42-48
• /
• 2014

A specific and sensitive liquid chromatography-electrospray ionization tandem mass spectrometry method (LC-ESI-MS/MS) was developed and validated for the simultaneous quantification of porphyrins (coproporphyrin, pentacarboxylporphyrin, hexacarboxylporphyrin, heptacarboxylporphyrin, and uroporphyrin) in human plasma and urine. Acidified plasma samples and urine samples were prepared by using liquid-liquid extraction using ethyl acetate and protein precipitation with acetonitrile, respectively. The separation was achieved onto a Synergi Fusion RP column ($150mm{\times}2.0mm$, $4{\mu}m$) with a gradient elution of mobile phase A (0.1% formic acid in 2 mmol/L ammonium acetate, v/v) and mobile phase B (20% methanol in acetonitrile, v/v) at a flow rate of $450{\mu}L$/min. Porphyrins and the internal standard (IS), coproporphyrin I-$^{15}N_4$, were detected by a tandem mass spectrometer equipped with an electrospray ion source operating in positive ion mode. Multiple reaction monitoring (MRM) transitions of the protonated precursor ions and the related product ions were optimized to increase selectivity and sensitivity. The proposed method was validated by assessing selectivity, linearity, limit of quantification (LOQ), precision, accuracy, recovery, and stability. The calibration curves were obtained in the range of 0.1-100 nmol/L and the LOQs were estimated as 0.1 nmol/L for all porphyrins. Results obtained from the validation study of porphyrins showed good accuracy, precision, recovery, and stability. Finally, the proposed method was successfully applied to clinical studies on the autism spectrum disorder (ASD) diagnosis of 203 Korean children.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.370-374
• /
• 2007

An analytical method for the simultaneous determination of four tetracycline (oxytetracycline, tetracycline, chlortetracycline, doxycycline) in egg samples was developed and validated using liquid chromatography with ultraviolet detection. Egg samples were extracted by the liquid-liquid extraction based on acetonitrile. The chromatographic separation was achieved on a reverse phase C8 column with gradient elution using a mobile phase of 20 mM oxalic acid (pH 1.5)/acetonitrile. The procedure was validated according to the Food Drugs Administration guideline determining accuracy, precision, and limit of detection. Mean recovery of tetracyclines from spiked egg samples (50, 100, 200, 400, and $800{\mu}g/kg$) were 78.8-109.3%. Linearity in concentration range of $50-800{\mu}g/kg$ was obtained with the correlation coefficient $(r^2)$ of 0.994-0.999. The intra- and inter-day precision (relative standard deviation; RSD) was between 0.3-12.8 and 0.2-11.7%, respectively. Limit of detection (LOD) and limit of quantification (LOQ) for the investigated tetracyclines were 30 and $50{\mu}g/kg$ depending on egg samples, respectively. This method was reliable, sensitive, economical and suitable for routine monitoring of tetracycline residues in dairy egg.

• Korean Journal of Veterinary Research
• /
• v.42 no.2
• /
• pp.171-181
• /
• 2002

Simultaneous multiresidue analysis using liquid chromatography determination for five benzimidazole anthelmintics(thiabendazole, oxibendazole, albendazole, mebendazole and fenbendazole) in bovine muscle, liver and omasum has been described. Blank or benzimidazole-fortified samples(0.5g) were blended with bulk $C_{18}$($40{\mu}m$, 18% load, endcapped, 2g). A column made from the resultant $C_{18}$/animal tissue matrix was first washed with hexane($8m{\ell}$), following which the benzimidazoles were eluted with acetonitrile($8m{\ell}$). Analytes of extracted sample were determined by liquid chromatography with UV detector at 290nm. Correlation coefficients of standard curves for individual benzimidazole isolated from fortified samples, using internal standardization, were linear($0.991{\pm}0.007$ to $0.996{\pm}0.005$) with average relative percentage recoveries from $62.1{\pm}3.8(%)$ to $92.3{\pm}7.5(%)$ for the concentration range($0.2{\sim}6.4{\mu}g/g$), respectively. Recoveries rates of TBZ, MBZ in liver, OBZ, MBZ in muscle and TBZ, MBZ in omasium from fortified benzimidazole were 92.%, 87.3%, 74.5%, 82.7%, 75.2% and 83.5% at condition II, respectively. Condition II showed higher recoveries rates than condition I. These results indicated that the matrix solid phase dispersion(MSPD) methodology is acceptable for the determination of 5 benzimidazole anthelmintics and may also suitable for other matrixes of food animal origin.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.324-329
• /
• 2008

An analytical method for the simultaneous determination of nine quinolones (QNs) namely, marbofloxacin, norfloxacin(IS), ciprofloxacin, danofloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, and flumequine in flatfish and egg was developed and validated using liquid chromatography with fluorescence detection (LC-FD). The samples were extracted using a traditional liquid-liquid extraction process; deproteinization was accomplished by the addition of trichloroacetic acid and acetonitrile (ACN), and defatting was performed with hexane. Chromatographic separation was achieved on a reverse phase C8 column with gradient elution using a mobile phase of 200 mM ammonium acetate buffer (pH 4.5) and ACN. The proposed method was validated according to the CODEX guideline. Mean recoveries of QNs from flatfish and egg were 89.6-106.5% with relative standard deviations (RSDs) below 15% at three different concentrations of 50, 100 and $500{\mu}g/kg$. Linearity was obtained with a correlation coefficient ($r^2$) of 0.9989-1.0000. The LOD for the investigated QNs was $1-16{\mu}g/kg$ depending on flatfish and egg. The present method can be applied simultaneously to determine QNs in muscle of flatfish and egg.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.418-423
• /
• 2017

An analytical method for the determination of dexamethasone (DM) in bovine milk samples was developed and validated using liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Milk samples were extracted by the liquid-liquid extraction based on acetonitrile. The chromatographic separation was achieved on a reverse phase $C_{18}$ column with gradient elution using a mobile phase of 0.1% formic acid in 95% acetonitrile. The procedure was validated according to the Ministry of Food and Drug Safety guideline determining accuracy, precision, limit of detection (LOD), and limit of quantification (LOQ). Mean recoveries of DM from spiked milk samples (25, 125, and 1,250 ng/mL) were 98.9-109.6%, and the relative standard deviation was between 1.7 and 4.4%. Linearity in concentration range of 12.5-1,250 ng/mL was obtained with the correlation coefficient ($r^2$) of 0.9997. LOD and LOQ for the investigated DM were 0.15 and 0.5 ng/mL depending on milk samples, respectively. This method was reliable, sensitive, economical and suitable for routine monitoring of DM residues in bovine milk.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.105-112
• /
• 1985

This research was carried out to investigate the optimal conditions ssociated with the RIA procedures such as a bridging phenomena, prozone effects and a new separation methods etc. The results obtained were summarized as follows: 1. The lgG fractions of donkey anti-rabbit IgG sera were purified by Protein-A-Sepharose affinity column, which indicates that Protein-A an affinity for IgG class of donkey antiserum. 2. In coating the IgG fraction on polystryene tubes, incubation conditions made no differences between 2 hr at room temperature and overnight at 4$^{\circ}C$. 3. There were no significant differences between 1st antibody-coated tube and 2nd antibody-coated tube as a separation method when compared in terms of reproducbility. A better reproducibility may be expected if the titers of 1st antibody for the progesterone to be assayed and of corresponding 2nd antibody are reasonably high. 4. The titers of anti-progesterone antibody for 3H-progesterone and progesterone-11HS-125I were 1:300 and 1:700 in liquid-phase, and 1:100 and 1:300 in solid-phse for the separation methods. 5. A bridging phenomena in which a standard curve is long and shallow were observed when progesterone-11HS-125I was used for the tracer, but not in 3H-progesterone. 6. A prozone effect in a solid-phase system, especially 1st antibody-coated tube method was observed which the degree of inhibition was significantly different although zero bindings look the same. In this case, the titration curve should be made both in the absence and in the presence of a, pp.opriate amount of competiter, standard, respectively.

• Analytical Science and Technology
• /
• v.36 no.1
• /
• pp.32-43
• /
• 2023

This study reports for the first time about a stability indicating RP-HPLC method for qualitative and quantitative determination of acalabrutinib in bulk and dosage form and in presence its impurities 1, 2 and 3. The chromatographic separation was carried on Zorbax XDB-C18 (250×4.6 mm; 5 µ id) as stationary phase, Phosphate buffer pH 6.4 and methanol 80:20 (v/v) as mobile phase at a flow rate of 1.0 mL/min, UV detection was carried at wavelength of 238 nm and the analysis was completed with a run time of 15 min. In these conditions the retention time of acalabrutinib and its impurities 1, 2 and 3 was observed to be 3.50, 4.83, 8.40 and 9.93 min respectively. The method was validated for system suitability, range of analysis, precision, specificity, stability and robustness. Spiked recovery at 50 %, 100 % and 150 % was carried for both standard and impurities and the acceptable % recovery of 98-102 was observed for acalabrutinib and both impurities studied and the % RSD in each spiked level was found to be less than 2. Stability tests were done through exposure of the analyte solution to five different stress conditions i.e expose to 1N hydrochloric acid, 1 N sodium hydroxide, 3 % peroxide, 80 ℃ temperature and UV radiation at 254 nm. In all the degradation condition, standard drug acalabrutinib was detected along with both the impurities studied and the degradation products were successfully separated. In the formulation analysis there is no other chromatographic detection of other impurities and formulation excipients. Hence the developed method was found to be suitable for the quantification of acalabrutinib and can separate and analyse impurities 1 and 2.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.1
• /
• pp.51-55
• /
• 2005

A high-performance liquid chromatographic method was employed for the determination of bumetanide in human plasma. After addition of internal standard (IS, naproxen) and acidification of the plasma with 1 M hydrochloric acid, the drug and IS were extracted into dichloromethane. The organic phase was back-extracted into 1 M sodium bicarbonate solution and 50 ${\mu}l$ of the aqueous phase was injected onto a reversed-phase C18 column with a mobile phase consisting of methanol: water: glacial acetic acid = 65 : 35 : 1. The samples were detected utilizing a fluorescence detector (excitation wavelength 235 nm, emission wavelength 405 nm). The method was specific and validated with a lower limit of 5 ng/mL. Intra- and inter-day precision and accuracy were acceptable for all quality control samples including the lower limit of quantification. The applicability of the method was demonstrated by analysis of plasma after oral administration of a single 2 mg dose to 24 healthy subjects. From the plasma bumetanide concentration vs. time curves, the mean AUC was $246.5{\pm}73.8\;ng{\cdot}hr/mL$ and $C_{max}$ of $132.1{\pm}40.9$ ng/mL reached 1.2 hr after administration. The mean biological half-life of burnet ani de was $1.1{\pm}0.2$hr. Based on the results, this simple and validated assay method could readily be used in any pharmacokinetic or bioequivalence studies using humans.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.202-206
• /
• 1992

The $CeO_2$-added Y-Ba-Cu-O oxides were prepared by the partial melt process involving the peritectic reaction, liquid + 2-1-1 phase ${\rightarrow}$ 1-2-3 phase, to investigate the effect of the dopant on microstructure and superconductivity. During the peritec reaction, all the added $CeO_2$ was converted to $BaCeO_3$ particles which were finely dispersed in large 1-2-3 grains. Superconducting transition temperature($T_{c}R=0$ point) of the partial-melted samples was as high as 90K regardless of $CeO_2$ content up to 5wt%, which is owing to the separation of the second phase from the 1-2-3 superconducting phase.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.616-624
• /
• 2018

In this study, a previous DNPH (2,4-dinitrophenylhydrazine) coupled with high performance liquid chromatography (HPLC) method to measure the concentration of formaldehyde in ambient and source environments has been improved. To improve the disadvantage of the previous HPLC method, an appropriate composition ratio of mobile phase (water: acetonitrile (ACN)) was determined and an isocratic analysis was conducted. Furthermore, limit of detection (LOD), limit of quantitation(LOQ), accuracy, and precision were investigated to verify the reliability of the analytical conditions determined. Finally, samples of exhaust gases from five different industrial facilities were applied to HPLC analytial method proposed to determine their formaldehyde concentrations. The appropriate composition ratio of the mobile phase under the isocratic condition was a mixture of water(40%) and ACN(60%). As the volume fraction of the organic solvent ACN increases, retention time of the formaldehyde peak was reduced. Detection time of formaldehyde peak determined using the proposed isocratic method was reduced from 7 minutes(previous HPLC method) to approximately 3 minutes. LOD, LOQ, accuracy, and precision of the formaldehyde determined using standard solutions were 0.787 ppm, 2.507 ppm, 93.1%, and 0.33%, respectively, all of which are within their recommended ranges. Average concentrations of the formaldehyde in five exhaust gases ranged from 0.054 ppm to 1.159 ppm. The lowest concentration (0.054 ppm) was found at samples from waste gas incinerator in a bisphenol-A manufacturing plant. The highest was observed at samples from the absorption process in manufacturing facilities of chemicals including formaldehyde and hexamine. The analytical time of the formaldehyde in ambient air can be shortened by using the isocratic analytical method under appropriate mobile phase conditions.