• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.921-927
• /
• 1996

The liquid-phase concentration from the interior to the surface region and its influence on the microstructural changes were investigated in pressureless sintered $\beta$-SiC Surface reaction-layer was formed by reaction of packing powder and volatile components on the surface during sintering which was induced the concentration of liquid-phase in the surface regions. The microstructural changes between the surface region and the interior were appeared in sintered specimen which was resulted from the difference of liquid-phase content during sintering. Microstructural changes were observd with the depth of about 250${\mu}{\textrm}{m}$ from he surface. The grain size and aspect ratio of SiC in the interior are larger than those in the surface region and the rate of transforma-tion of $\beta$-to $\alpha$-SiC during sintering is higher in the interior than that in the surface region.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1700-1716
• /
• 1996

The two-dimensional, unsteady, laminar conservation equations for mass, momentum, energy and species transport in the gas phase and mass, momentum and energy in the liquid phase are solved simultaneously in spherical coordinates in order to study heating and vaporization of a droplet entrained in the oscillating flow. The numerical solution gives the velocity and temperature distribution in both gas and liquid phase as a function of time. When the gas flow oscillates around an vaporizing droplet, the liquid flow circulates in the clockwise or counterclockwise direction and the temperature distribution in the liquid phase changes its shapes, depending on the gas fow direction. When the gas flow changes its direction of circulating liquid flow is opposite to the gas flow, forming two vortex circulating in the opposite direction. During the heating period, the difference in the maximum and minimum temperature is large, followed by the almost uniform temperature slightly below the boiling temperature. The mass and heat transfer from the droplet depend on the droplet temperature, droplet diameter and the magnitude of relative velocity, giving the droplet lifetime different from the d$^{2}$-law.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.425-425
• /
• 1995

The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.426-433
• /
• 1995

The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2097-2102
• /
• 2011

Discharge analysis technique for dielectric liquid was presented by using the Finite Element Analysis (FEA) under a lightning impulse incorporating two-phase flow phenomena which described gas and liquid phases in discharge space. Until now, the response of step voltage has been extensively explored, but that of lightning impulse voltage was rarely viewed in the literature. We, therefore, developed an analyzing technique for dielectric liquid in a tip-sphere electrode stressed by a high electric field. To capture the bubble phase, the Heaviside function was introduced mathematically and the material functions for the ionization, dissociation, recombination, and attachment were defined in liquid and bubble, respectively. By using this numerical setup, the molecular dissociation and ionization mechanisms were tested under low and high electric fields resulted from the lightning impulse voltage of 1.2/50 ${\mu}s$. To verify our numerical results, the velocity of electric field wave was measured and compared to the previous experimental results which can be viewed in many papers. Those results had good agreement with each other.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.373-379
• /
• 2019

One of the real issues of the recent years is water contamination because of harmful synthetic dyes. Liquid Membranes (LM) resemble a promising alternative to the current separation processes, demonstrating various points of interest as far as effectiveness, selectivity, and operational expenses. The improvement of various Liquid Membranes designs has been a matter of examination by few researchers, particularly for the expulsion of dyes from aqueous solutions. The choice of organic surfactants plays an essential role in the efficiency of the dye removal. In LM design, the most significant step towards productivity is the decision of the surfactant type and its concentration. Liquid emulsion membrane (LEM) was used to remove safranin from aqueous solutions in which the emulsion was made with the help of D2EHPA as carrier, kerosene was used as a diluent and Span 80 (Sorbiton monooleate) was used as an emulsifying agent or surfactant. Various sorts of internal stages were utilized, to be specific sulphuric acid and sodium hydroxide. The impact of parameters influencing extraction efficiency such as pH of feed solution, concentrations of surfactant and emulsifying agent in membrane phase, volume ratio of internal phase to membrane phase, internal phase concentration, agitation speed and time of extraction were analyzed.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.1-7
• /
• 2020

In this study, a multichannel gas-liquid microextraction system is designed by integrating the automatic elution of extraction line and multichannel gas-purging liquid phase microextraction. The system uses an injection pump and inert gas to push the extraction solvent to a sample bottle of a gas-phase color autosampler and then implements multichannel gas-liquid microextraction and gas chromatography-mass spectrometry. The system also employs a three-way integrated micro-high-temperature heater, syringe pump, and microflow controller to realize the simultaneous processing of multiple groups of samples, thus improving the sample pretreatment speed and reproducibility and reducing human error. Autoinjection experiments were implemented with polycyclic aromatic hydrocarbon standard samples. The experiments show that the average recovery rate of the system exceeds 70%, and the relative standard among the channels is less than 15%.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.371-376
• /
• 2014

A novel three-phase hollow fiber liquid phase microextraction was developed for the determination of malachite green (MG) in environmental waters, which selected [BMIM][$PF_6$] mixed with 1% trioctylphosphine oxide (TOPO) as supported phase. Several parameters (accepter phase pH, sample pH, supported phase membrane, volume of accepter phase, salinity, extraction time) that could affect extraction performance were investigated. Under the optimal extraction conditions, the established approach showed excellent characters as: high enrichment factor (212), wide linear range ($0.20-100{\mu}gL^{-1}$), low detection limit ($0.01{\mu}gL^{-1}$), good reproducibility (RSD, 8.9%, n=5) and satisfactory recovery (84.0-106.2%). The method was applied to detect MG at Yangtze River and pond waters in Zhenjiang, Jiangsu province, and 4 sites among 15 sampling sites were found MG with the concentration of $1.73-11.06{\mu}gL^{-1}$, which confirmed that the proposed environmentally friendly method was simple and effective for monitoring MG in aquatic system.

• 대한기계학회논문집B
• /
• 제32권7호
• /
• pp.529-535
• /
• 2008

The characteristics of combustion process in an internal combustion engine are affected by the mixing process between injected fuel and ambient gas. Therefore, it is necessary to understand the mixture formation process of diesel spray. In this study, the spray structure was visualized by the exciplex fluorescence method, which can provide the simultaneous 2-D images of vapor and liquid phase in inner spray. For accurate investigation, the liquid-phase images were recorded with a 35mm still camera and CCD camera. Consequentially, it could be confirmed that the high-concentration vapor phase is formed in the region of spray tip and the edge of the liquid phase where droplets exist in the evaporating diesel spray, and the formed vapor is spread by diffusion. Also, the distribution of vapor is determined by the motion of droplets that exist in the edge of the liquid phase and the spray-tip region.

• 해양환경안전학회지
• /
• 제15권1호
• /
• pp.63-69
• /
• 2009

가스상의 체적분율과 압력강하는 기액이상류에 대한 이해와 예측에 있어서 매우 중요한 인자이다. 또한 그것들은 산업용 대용량의 열교환시스템 및 선박에 설치되는 보일러 및 냉동시스템의 설계에 있어서 필수적인 항목이다. 따라서 본 논문에서는 파이프의 모든 경사각도에서 기액이상류 가스상의 체적분율과 압력손실을 예측할 수 있는 이론적 해석 방법을 제시한다. 여기서의 이론적 해석은 2유체 층상류 모델을 기초로 하고 있다. 또한 이론적 해석결과와 기존의 실험결과와 비교한 결과에 대해서도 제시한다.