• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.77-85
• /
• 2010

Recently, As increasing cleanroom size, Stocker system is trending the large size and long distance for LCD material transfer system In order to rise a rate of production, the manufacturer are on the decrease of total tact time with Stocker system And the manufacturer are requested to high speed of next generation Stocker system Also manufacturers for the high oil prices through energy-saving conservation to minimize plant operating costs are required. Therefore, this paper propose optimal design of high efficiency Contactless Power Supply(CPS) system about high speed and energy savings of next generation Stocker system This paper proposes CPS system is applied in the long distance and straight section with Stocker system for energy savings. The test results of input!output characteristic and efficiency of CPS system on operating pattern of Stocker system were analyzed, and proved the applicability on commercial use.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.308-311
• /
• 2015

Because worldwide interest in the health is increased, the real-time health monitoring system has been demanded to be more convenient non-contact and precise medical devices than conventional. Therefore we developed the blood pressure monitoring system using UWB(Ultra Wide Band) radio wave which contact to the human body through the radar and continuously collect a movement signal of the blood vessel. Then the collected data including pulse rate, systolic blood pressure, diastolic blood pressure is processed in real time. The system monitors and controls through a program-based embedded LCD(Liquid Crystal Display) using Qt GUI(Graphic User Interface) to be displayed in real time. We implement the system as a embedded system because of reducing the size of the limited resources. Existing PC GUI design mode is used relatively large memory, therefore it requires more CPU(Central Processing Unit) capacity and processing time.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2014

We propose the new fabrication method of a 70 nm half-pitch wire grid polarizer with high performance using magnetic soft mold. The device is a form of aluminium gratings on a PET(Polyethylene phthalate) substrate whose size of $3cm{\times}3cm$ is compatible with a TFT_LCD(Tin Flat Transistor Liquid Crystal Display) panel. A magnetic soft mold with a pitch of 70 nm is fabricated using two-step replication method. As a result, we get a NWGP pattern which has 70.39 nm line width, 64.76 nm depth, 140.78 nm pitch, on substrate. The maximum and minimum transmittances of the NWGP at 800 nm are 75% and 10%, respectively. This work demonstrates a unique cost-effective solution for nanopatterning requirements in consumer electronics components.

• Design & Manufacturing
• /
• v.2 no.5
• /
• pp.1-4
• /
• 2008

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50-200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.65-71
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD(Liquid Crystal Display) transfer system. In this paper, the $1^{st}$ DOE(Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six analysis are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The $2^{nd}$ DOE is conducted to obtain RSM(Response Surface Method) equation. The CCD(Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level quality, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Computers and Concrete
• /
• v.5 no.5
• /
• pp.491-501
• /
• 2008

The present study verifies compressive strength, ultrasonic pulse velocity, electrical resistance,permeable ratio, and shrinkage from waste glass controlled low strength materials (WGCLSM) and early-high-strength WGCSLM specimens, by replacing the sand with waste glass percentages of 0%, 10%,20%, and 30%. This study reveals that increasing amounts of waste LCD glass incorporated into concrete increases WGCLSM fluidity and reduces the setting time, resulting in good working properties. By increasing the glass to sand replacement ratio, the compressive strength decreases to achieve low-strength effects. Furthermore, the electrical resistance also rises as a result of increasing the glass to sand replacement ratio. Early-high-strength WGCSLM aged 28 days has twice the electrical resistance compared to general WGCSLM. Early-high-strength WGCSLM aged 7 days has a higher ultrasonic pulse velocity similar to WGCSLM aged 28 days. The variation of length with age of different compositions is all within the tolerance range of 0.025%. This study demonstrates that the proper composition ratio of waste LCD glass to sand in early-high-strength WGCSLM can be determined by using different amounts of glass-sand. A mechanism for LCD optical waste glass usage can be established to achieve industrial waste minimization, resource recycling, and economic security.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.158-163
• /
• 2002

최근 전자통신기기의 급속화된 발전과 함께 전자부품에 대한 초소형화, 고성능화가 요구되고 있다. 특히 노트북 컴퓨터나, PDA, LCD 모니터와 같이 박막 액정 표시장치(Thin Film Transistor Liquid Crystal Display, TFT-LCD)가 대표적인 예라 볼 수 있다. 이러한 박막 액정 표시장치는 그 내부에 냉음극 형광램프(Cold Cathode Fluroscent Lamp)가 있어서 백라이트의 역할을 하는데 냉음극 형광램프의 특성상 초기 고압의 구동전압을 인가시킬 수 있는 인버터가 필수적이라 하겠다. 본 논문에서는 18인치(4_CCFL), 20인치(6_CCFL) TFT-LCD 모니터용, 멀티램프 구동 인버터를 설계 제작하여 90%에 가까운 효율을 얻었다. 코일손실 및 전자유도의 장애가 없고 불연성의 장점을 가지고, 소형화가 가능한 적층형 압전 변압기를 제작하고 이 제작된 적층형 압전 변압기의 전기적 특성분석을 통한 방전램프 구동용 인버터의 승압용 변압기로써 적용이 가능함을 확인하였다.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.274-279
• /
• 2017

LCD(Liquid Crystal Display) panel cutting problem is a sort of two dimensional cutting stock problem. A cutting stock problem is problem that it minimizes the loss of the stock when a stock is cut into various parts. In the most research of the two dimensional cutting stock problem, it is supposed that the relative angle of a stock and parts is not important. Usually the angle is regarded as horizontal or perpendicular. In the manufacturing of polarizing film of LCD, the relative angle should be maintained at some specific angle because of the physical and/or chemical characteristics of raw material. We propose a mathematical model for solving this problem, a two-dimensional non-Guillotine cutting stock problem that is restricted by an arranged angle. Some example problems are solved by the C++ program using ILOG CPLEX classes. We could get the verification and validation of the suggested model based on the solutions.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.349-354
• /
• 2009

In this paper we have constructed three dimensional images and examined structural failure on thin film transistor (TFT) liquid crystal display (LCD) by using dual-beam focused ion beam (FIB) and IMOD software. Specimen was sectioned with dual-beam focused ion beam. Series of two dimensional images were obtained by scanning electron microscopy. Three dimensional reconstruction was constructed from them by using IMOD software. The short defect between Gate layer and Data layer was found from the result of three dimensional reconstruction. That phenomena made the function of the gate lost and data signal supplied to the electrode though the Drain continuously. That signal made continuous line defect. The result of the three dimensional reconstruction, serial section, SEM imaging by using the FIB will be the foundation of the next advanced study.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.10-14
• /
• 2007

LCD performance is generally evaluated in terms of luminance and color versus viewing angle. In the present paper, we show that this type of display can be favorably characterized in terms of polarization. We show that ELDIM EZContrast instrument which is routinely used for viewing angle measurements can be upgrade for measuring the polarization state of the light at each incidence and azimuth angle. More precisely, the degree of polarization of light, its ellipticity and polarization direction can be measured at each incidence angle between 0 and $88^{\circ}$ and for all the azimuth angles (from 0 to $360^{\circ}$). Important differences between the displays can be detected and related to their internal structures when luminance and color profiles are quite similar. The same setup can also be used to characterize optical components of the LCDs.