• The Korean Journal of Mycology
• /
• v.23 no.2 s.73
• /
• pp.129-138
• /
• 1995

DNA fragment being able to restore in vitro activity of ${\beta}-1,3-glucan$ synthase was cloned by transformation of the Saccharomyces cerevisiae LP353 mutant strain with genomic library constructed in the YCp50. For the selection of transformants which showed no detectable phenotype linked to recovery of the defect in ${\beta}-1,3-glucan$ synthase activity, the colony autoradiography was succesfully applied. The restriction map of the cloned DNA fragment, which is 8.5-kb in length, was constructed. Both the YEplac195 and the YCp50 carrying the 8.5-kb fragment increased ${\beta}-1,3-glucan$ synthase activity of LP353 by two fold. Neither the YEplac195 nor the YCp50 carrying the 8.5-kb DNA fragment, however, complemented the temperature-dependent osmotic sensitivity which is another distinctive phenotype of LP353. Subcloning experiments indicated that a functional region was located in 4.8-kb BglII-KpnI fragment. The 4.8-kb fragment was also able to increase the level of ${\beta}-1,3-glucan$ content in cell wall as well as the resistance of cells to cell wall lytic enzyme, ${\beta}-1,3-glucanase$. The growth rate of the LP353 with 4.8-kb fragment was almost same as that of wild type strain in liquid medium with 1.2 M sorbitol at nonpermissive temperature. Taken these results together, the 4.8-kb fragment seemed to contain the BGS2 gene for ${\beta}-1,3-glucan$ synthase activity in yeast S. cerevisiae.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.27-31
• /
• 2007

Trifloxystrobin standard was analyzed by high performance liquid chromatography (HPLC). The recovery of the trifloxystrobin and it's metabolite CGA321113 were $84.6{\sim}95.3%$ and $86.4{\sim}87.3%$ and their detection limits for both of them were 0.04 mg $kg^{-1}$. In case of foliar application in the chinese cabbage (Brassica campestris L. ssp pekinnensis (Lour.) Rupr.), the amount of the residue of trifloxystrobin was above the maximum residue level (temporary MRL, 0.5 mg $kg^{-1}$) when it was treated either two times three to five days before harvest or three times three to seven days before harvest. Whereas in case of drenching the mount of the residue was below the temporary MRL, the residues in the cabbage in both the cases where the recommended amount (150 mL of the solution diluted 1500 times) and double of the amount were treated were 0.16 and 0.31 mg $kg^{-1}$, respectively. In conclusion, it should be safe to apply the trifloxystrobin (22% WP) in the soil of cabbage field abiding by the tentative recommendation level, but for the foliar application it appeared inappropriate.

• Journal of Veterinary Clinics
• /
• v.23 no.2
• /
• pp.164-168
• /
• 2006

The residue depletion of ampicillin was investigated in the olive flounder (Paralichthys olivaceus), rockfish (Sebastes schlegeli), and red sea bream (Pagrus major) after 5 days treatment with medicated feed at a dose of 100 mg/kg bw/day. Fishes were sampled for muscle on 1st, 2nd, 3rd, and 4th day after treatment. Ampicillin concentrations were determined by high performance liquid chromatography after SPE column extraction. The recovery rates of ampicillin in muscle samples ranged 94-98% and 83-88% for the concentration of 0.05 mg/kg and 0.1 mg/kg, respectively. Ampicillin concentrations detected on 1st day after treatment were 0.143, 0.138, and 0.187 mg/kg in the muscle of olive flounder, rockfish, and red sea bream, respectively. After a withdrawal of 3 days, muscle concentrations were 0.016, 0.012, and 0.021 mg/kg in the olive flounder, rockfish, and red sea bream, respectively. Ampicillin was not detectable in muscle samples on 4 days following withdrawal of the medicated feed. From results of the present study, a withdrawal period of ampicillin is proposed on 5 days after 5 days treatment with medicated feed at a dose of 100 mg/kg bw/day to avoid the presence of excessive residues of the edible muscles of olive flounder, rockfish, and red sea bream.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.37-41
• /
• 2012

The current standard for testing tetrodotoxin (TTX) in foodstuffs is the mouse bioassay (MBA) in Korea as in many other countries. However, this test suffers from potential ethical concerns over the use of live animals. In addition, the mouse bioassay does not test for a specific toxin thus a sample resulting in mouse incapacitation would need further confirmatory testing to determine the exact source toxin (e.g., TTX, STX, brevotoxin, etc.). Furthermore, though the time of death is proportional to toxicity in this assay, the dynamic range for this proportional relationship is small thus many samples must be diluted and new mice be injected to yield a result that falls within the quantitative dynamic range. Therefore, in recent years, there have been many efforts in this field to develop alternative assays. High performance liquid chromatography (HPLC) coupled with mass spectrometry (MS) has been emerged as one of the most promising options. A LC-MS-MS method involves solid-phase extraction (SPE) and followed by analysis using an electrospray in the positive ionization mode and multiple reactions monitoring (MRM). To adopt LC-MS-MS method as alternative standard for testing TTX, we performed a validation study for the quantification of TTX in puffer fish. This LC-MS-MS method showed good sensitivity as limits of detection (LOD) of $0.03{\sim}0.08{\mu}g/g$ and limits of quantification (LOQ) of $0.10{\sim}0.25{\mu}g/g$. The linearity ($r^2$) of tetrodotoxin were 0.9986~0.9997, the recovery were 80.9~103.0% and the relative standard deviations (RSD) were 4.3~13.0%. The correlation coefficient between the mouse bioassay and LC/MS/MS method was higher than 0.95.

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.277-281
• /
• 2011

A rapid and very sensitive high-performance liquid chromatography/atmospheric-pressure chemical-ionization mass spectrometry method to detect ethylenethiourea (ETU) fungicide residues in fruits was developed. Methylene chloride was used as the surface extraction solvent for the target component. Recovery rates improved when cysteine hydrochloride and sodium carbonate were added to product prior to fortification. The limits of detection and quantification were approximately 0.006 and 0.02 mg/kg, respectively, from mandarin oranges. Recoveries from mandarin oranges, oranges, bananas, and pears, spiked in the range of 0.05-0.5 mg/kg, averaged 80-100%. The proposed method was used to monitor the presence of ETU in commercial fruits purchased from different markets in Seoul, Korea. ETU was found in four orange peels and in three mandarin orange peel samples. The highest ETU residue levels were $73.6{\mu}g/kg$ and $29.8{\mu}g/kg$.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.632-636
• /
• 2010

The level of ${\gamma}$-aminobutyric acid (GABA) in pigmented rice was quantitatively and qualitatively determined by high pressure liquid chromatography/fluorescence detection (HPLC/FLD). In this study, the recovery rate and limit of detection (LOD) of GABA were 122.4${\pm}$2.4% and 0.23 ${\mu}g/g$, respectively. The geminating pigmented rice samples, which were harvested in Paju, Korea, were soaked in water at $18^{\circ}C$ for 20 hr. After soaking, the samples were germinated at $30^{\circ}C$ for about 24 hr. GABA content was highest (293.0 ${\mu}g/g$) in the germinated red rice. Furthermore, GABA levels in the germinated rice increased significantly by up to 11.1 and 24.7-fold as compared to non-germinated rice and milled rice, respectively. The GABA concentrations of non-germinated rice, with the exception of red rice, were significantly higher than those of milled rice by 7.6-20.6-fold.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.234-241
• /
• 2016

The approach presented in this article refers to the bioanalytical method validation for the detection and quantitative determination of arsenic species including arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) in dog plasma by high-performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP/MS). The arsenic species were separated using an agilent As speciation column by a mobile phase of 2 mM sodium phosphate monobasic, 0.2 mM ethylenediaminetetraacetic acid disodium salt dehydrate, 10 mM sodium acetate, 3 mM sodium nitrate and 1 % ethyl alcohol at pH 11 (adjusted with 1M NaOH). The method validation experiment was obtained selectivity, linearity, accuracy, precision, matrix effect, recovery, system suitability, dilution integrity and various stabilities. All calibration curves showed good linearity (R²>0.999) within test ranges. The lower limit of quantitation (LLOQ) was 5 ng/mL for As(III), As(V) and DMA, and 20 ng/mL for MMA. The system suitability and dilution values were within 6.5 % and 7.7 %. Subsequently, the developed and validated HPLC-ICP/MS method was also successfully applied to determine the arsenic speciation in dog plasma samples, and the recoveries for the spiked samples were in the range of 91.5–102.2 %. Therefore, this method could be applied to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies in biological samples.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.2
• /
• pp.130-137
• /
• 2020

BACKGROUND: Mefentrifluconazole and triticonazole are the triazole fungicides. The maximum residue levels for agricultural products need to be set up. Therefore, development of the official analytical method for determination of mefentrifluconazole and triticonazole residues from agricultural crops was necessary due to safety management, and then a simultaneous analytical method was developed for the determination of mefentrifluconazole and triticonazole in agricultural crops. METHODS AND RESULTS: Samples were extracted using acetonitrile and purified using dispersive solid phase extraction, and then detected with liquid chromatograph-tandem mass spectrometry (LC-MS/MS). Matrix-matched calibration curves (0.0025-0.25 ㎍/mL) were linear into a sample extract with r²>0.99. For validation, the recovery test was carried out at three fortification levels (LOQ, 10 LOQ and 50 LOQ) from agricultural samples. The results for mefentrifluconazole and triticonazole ranged between 92.3 to 115.3% and 91.4 to 108.5%, respectively and RSD (relative standard deviation) values were also below 6.0%. Furthermore, inter-laboratory was conducted to validate the method. CONCLUSION: All values were corresponded with the criteria ranges requested by both the CODEX (CAC/GL 40-1993, 2003) and MFDS guidelines (2016). Therefore, the proposed method can be used as an official analytical method for determination of mefentrifluconazole and triticonazole (triazole fungicides) in the Republic of Korea.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.517-520
• /
• 2006

The leaching behaviors of zinc and manganese oxides of spent alkaline manganeses battery in sulfuric acid solution by using $H_{2}O_{2}$ as a reducing agent were investigated according to the concentration of $H_{2}SO_{4}$, temperature, reaction time, and the amount of $H_{2}O_{2}$. The experimental results of zinc and manganeses dissolution rates obtained without a reducing agent at 100 g/L solid/liquid ratio, 3.0 M $H_{2}SO_{4}$, $60^{\circ}C$ and 200 r.p.m. were 97.7% and 43.5%, respectively. On the other hand, zinc and manganeses dissolution rates obtained by adding 30 mL reducing agent at $60^{\circ}C$ were 99.6% and 97.1%, respectively. The addition of the reducing agent increased the leaching of manganese by two-fold compared to the absence of a reducing agent. In case of adding over 30 mL $H_{2}O_{2}$, however, the leaching rates of zinc and manganeses were independent of reducing agent amounts.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1164-1173
• /
• 1996

Treating methods and characteristics of waste from a nuclear fuel powder conversion plant were studied. To recovery or treat a trace uranium in liquid waste, the ammonium uranyl carbonate(AUC) filtrate must be heated for $CO_2$ expelling, essentially. Uranium content of final treated waste solution from fuel powder processes for a heavy water reactor(HWR) could be lowered to 1 ppm by the lime treatment after the ammonium di-uranate(ADU) precipitation by simple heating. Otherwise, in case of the waste from fuel powder processes for a pressurized light water reactor(PWR), it is result in 0.8 ppm as a form of uranium peroxide such as $UO_4{\cdot}2NH_4F$ compounds. Optimum condition was found at $101^{\circ}C$ by the simple heating method in case of HWR powder process waste. And in case of PWR powder process waste, optimum condition could be obtained by precipitating with adding hydrogen peroxide and adjusting at pH 9.5 with ammonia gas at $60^{\circ}C$ after heating the waste In order to expelling $CO_2$. As the characteristics of recovered uranium compounds, median particle size of ADU was increased with pH increasing in case of HWP waste. Also, in case of uranium proxide compound recovered from PWR waste, the property of $U_3O_8$ power obtained after thermal treatment in air atmosphere was similar to that of the powder prepared from AUC conversion plant.