• Food Science of Animal Resources
• /
• v.41 no.2
• /
• pp.335-342
• /
• 2021

Vitamin B12 deficiency may lead to serious health issues in both infants and adults. A simple analytical method involving sample pretreatment with enzyme, followed by cyanide addition under acidic conditions; separation on an immunoaffinity column; and high-performance liquid chromatography (HPLC) was developed for the rapid detection and quantitation of vitamin B12 in powdered milk. Detection limit and powdered milk recovery were determined by quantitative analysis. The limits of detection and quantitation were 2.71 and 8.21 ㎍/L, respectively. Relative standard deviations of the intra-day and inter-day precisions varied in the ranges of 0.98%-5.31% and 2.16%-3.90%, respectively. Recovery of the analysis varied in the range of 83.41%-106.57%, suggesting that the values were acceptable. Additionally, vitamin B12 content and recovery in SRM 1849a were 54.10 ㎍/kg and 112.24%, respectively. Our results suggested that the analytical method, including the sample pretreatment step, was valid. This analytical method can be implemented in many laboratory-scale experiments that seek to save time and labor. Therefore, this study shows that immunoaffinity-HPLC/ultraviolet is an acceptable technique for constructing a reliable database on vitamin B12 in powdered milk containing starch as well as protein and/or fat in high amounts.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.150-151
• /
• 2006

Laser pyrolysis is a very suitable method for the synthesis of a wide range of nanoparticles. A pilot unit based on this process has been recently developed at CEA. This paper reports results showing the possibility to produce SiC and $TiO_2$ nanoparticles at rates of respectively 1 and 0.2 kg/h and also the possibility to adjust the mean grain size of the particles and their structure by changing the laser intensity and reactants flow rates. First tests of liquid recovery have been also successfully performed to limit the risks of nanoparticles dissemination in the environement during their recovery.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.109-122
• /
• 2018

This work highlights extraction and removal of Lignosulfonate using sunflower oil-Tri-n-octylamine (TOA) system in bulk liquid membrane transport. Maximum extraction and recovery percentages of 92.4% and 75.2% were achieved. Optimum manifold operating conditions were: 4 vol.% TOA, $2{\pm}0.1$ feed phase pH, 300 rpm stirring speed, at $40^{\circ}C$ with 0.2 (M) $Na_2SO_4$ solution. 1:2 (organic/aqueous) and 1:1 (aqueous/aqueous) phase ratios produced best results. Extraction (36.85 kJ/mol) was found to be intermediate controlled and stripping (54.79 kJ/mol) was chemical reaction controlled. Kinetic estimation of data with higher rate constants for stripping vis-${\grave{a}}$-vis extraction showed latter to be rate determining.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.313-320
• /
• 2019

Extraction/separation of cobalt by supported liquid membrane has been reviewed. The review discusses various directions associated with the supported liquid membrane process, such as the kind of supported liquid membrane, the principle of supported liquid membrane, transport mechanism involved, and the advantages and disadvantages of the supported liquid. Finally, extraction and separation of cobalt from other metals using extractant through supported liquid membrane have been reviewed. Separation of cobalt using various reagents and cobalt recovery from scrap using commercial extractant can be a potential perspective from the application of supported liquid membrane application.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.275-276
• /
• 2017

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.164-170
• /
• 2019

The absorption and release capacities, survival efficiency, and recovery rates of five kinds of transport media were evaluated based on the swab elution method (Quantitative) of CLSI (Clinical and Laboratory Standards Institute) M40-A2. Liquid media showed mostly better results than semi-solid media in the three evaluations. The flocked swabs had better ability to absorption and discharge bacteria than the standard swabs. The liquid medium (S4) had the best survival efficiency. Pneumococcal strains with poor growth had a higher survival efficiency and recovery rate in liquid media (S4, S5). The results of microbial recovery showed that S. pyogenes met all the CLSI standards in all media. S. pneumoniae was inadequate in the semi- solid media (S2, S3) and all the remaining media met the criteria. H. influenzae was unsuitable in semi-solid media (S1, S3) and met the criteria in semi-solid medium (S2) and liquid medium (S4, S5). The viability of the H. influenzae, pneumococcal strain causing respiratory disease, was poor in most media. Overgrowth of P. aeruginosa was observed at room temperature. The combination of liquid medium and flocked swab confirmed the best results in the three evaluation methods.

• Membrane and Water Treatment
• /
• v.3 no.4
• /
• pp.243-252
• /
• 2012

Tri-n-butyl phosphate (TBP) was used as carrier for the transport of Golden yellow and Cibacron LSG dyes through a hexane bulk liquid membrane. The transport efficiency of dyes by TBP was investigated under various experimental conditions such as pH of the feed phase (dyes solution), concentration of the receiving phase (NaOH solution), concentration of TBP in membrane, rate of stirring, effect of transport time, type of solvent, dye concentration in feed phase, effect of temperature.. The maximum transport dyes occurs at ratio of 1:1 TBP-hexane At pH 3.0 0.1 (feed phase) the transport dyes decreased. At high stirring speed (300 rpm) the dyes transport from the feed phase to the strip phase was completed within 60 minutes at $27^{\circ}C$. Under optimum conditions: Feed phase 100 mg/L dyes solution at pH 1.0 0.1, receiving phase 0.1 mol/L NaOH solution, membrane phase 1:1 TBP-hexane , Stirring speed 300 rpm and temperature $27^{\circ}C$, the proposed liquid membrane was applied to recover the textile effluent.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.441-453
• /
• 1994

Two extraction methods, liquid-liquid extraction(LLE) and solid-phase extraction(SPE), coupled with GC/MS were compared as preconcentration procedures for priority pollutants in water. Among the semi-volatile priority pollutants, 11 acid and 44 base/neutral compounds were spiked in reagent water. With LLE, which is a modification of EPA Method 625, the overall mean recovery of the 54 compounds was 91% with a mean relative standard deviation(RSD) of 4.6%. With SPE, the overall mean recovery of the 52 compounds was 53% with a mean RSD of 8.9%. The detection limits of both methods were in the range of $1{\sim}5{\mu}g/l$.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.82-91
• /
• 1992

The examination of the pollutants originated from domestic sewage, industrial and agricutural activities the existences of some toxic heavy metals, organic matters and pathogenic microorganisms. A recent report of WHO brought out that such pollutants are in existence with above roughly 2,000 kinds of chemical substances and amongst them about 750 chemicals have been indentified by drinking water. And above 600 kinds of them are organic pollutants and in addition these include carcinogenic mutagenic and poisonous substances. This is not intended to embody a study of broad confined to various approaches on organic materials, and therefore will be THM produced on injection of chlorine at water filtration plant. To specify the relations between THM and factors having an effect upon THM such as TOC, Cl$_{2}$, Temperature, pH and reaction time, first of all the recovery ratio for analytical methods of THM (Head sapce, purge and trap, Liquid/ Liquid Extraction methods) was investigated. Provided that by using it,the correction coefficients are obtained, the accuracy of data might be able to be enhanced through analysis.The result of the experiments are given in the followings. 1) Among three kinds of analytical methods, recovery rate was higher in order of purge and trap Liquid/Liquid Extraction, Head space. There is no great difference in recovery rate among three methods. 2) The higher the concentration of TOC, the more the amount of THM. 3) The higher the reaction temperature, the more the amount of THM. 4) The longer the reaction time, the more the amount of THM. 5) The higher the pH, the more the amount of THM. 6) The higher the concectration of chlorine, the more the amount of THM.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.222-229
• /
• 2020

Membrane assisted condenser is an innovative membrane operation that exploits the hydrophobic nature of microporous membranes to promote water vapor condensation and recovery. It can be used for water and chemicals recovery from waste gaseous streams. In this work, the testing of membrane condenser for water and ammonia recovery from synthetic streams (i.e., a saturated air stream with ammonia) simulating the plume of cooling tower is illustrated. The modeling of the process was carried out for predicting the membrane-based process performance and for identifying the minimum operating conditions for effectively recovering liquid water. The experimental data were compared with the results achieved through the simulations showing good agreement and confirming the validity of the model. It was found that the recovery of water can be increased growing the temperature difference between the plume and the membrane module (DT), the relative humidity of the plume (RH^plume) and the feed flow rate on membrane area ratio. Moreover, the concentration of NH₃ in the recovered liquid water increased with the growing DT, at increasing NH₃ concentration in the fed gaseous stream and at growing relative humidity of the feed.