• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.218-223
• /
• 2017

본 논문은 75톤급 액체로켓엔진의 상태진단을 위해 칼만 필터를 이용한 고장진단 연구를 수행하였다. 칼만 필터 설계를 위해 75톤급 액체로켓엔진 비선형 시뮬레이션 모델을 공칭 작동점에서 선형화하였으며, 정상 모델의 상태량 변수 4가지를 이용하여 측정값과 추정값 비교를 통해 칼만 필터의 성능을 확인하였다. 이를 이용한 고장진단 알고리즘의 성능을 확인하기 위하여 터보펌프 고장을 모사하였으며 정상 모델의 잔차 변화를 비교하여 칼만 필터를 이용한 고장진단이 가능함을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.408-411
• /
• 2004

Color filter is a fundamental and necessary component to make a full-color TFT-LCD, its quality intensively influence the performance of TFT-LCD in the application of Notebook Computer, Monitor and Television. Color filter in chromaticity also make an effect for human visual system and video enjoyment. Recently, mother glass size is enlarged for demand of large-size panels and new generation color .filter technology for large-size liquid crystal cell panels is also developed. Here, latest generation color filter technology in TFT-LCD will be discussed.

• 유기물자원화
• /
• 제25권1호
• /
• pp.5-13
• /
• 2017

기존 국내 여과판의 재질은 주로 polypropylene 소재의 여과판을 사용하였으며 그 이유는 성형성이 좋고, 가격이 저렴하며 매우 보편적으로 보급된 소재이기 때문이다. 그러나 고압에 의해 한번 뒤틀려진 polypropylene 소재 여과판은 재사용이 어려우며 가압형 고액분리모듈의 연속 운전에 문제를 야기할 수 있다. 따라서 기존 polypropylene 소재보다 성능이 뛰어난 TPU(Thermoplastic Poly Urethane) 소재개발을 위해 새로운 소재에 대해 설계된 여과판의 구조적 안정성을 해석적 기법을 통해 예측하였다. 20 bar의 압력하중 하에서 TPU를 적용한 여과판은 최대 변형량이 27.85 MPa로 나타났으며 이 값은 TPU 응력-변형률(Stress-Strain) 한계치 이하 값으로 여과판 재질에 대한 구조적 안정성을 확보하였다.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1102-1114
• /
• 2002

An electret filter is composed of permanently charged electret fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using poly-disperse particles when submicron particles were loaded. Long-term experiments were conducted by applying two different charging states, which were spray electrification and charge equilibrium by bipolar ionization. In order to investigate the effect of particle loading in filter media, NaCl particles were generated from 0.1% and 1% solutions by an atomizer. Liquid DOS particles were used to evaluate the effect of liquid particles on the collection efficiency of an electret filter. The results show significant effect of charge amount and size distribution of loading particles on the collection performance of a filter media in submicron region. Smaller particles loaded in electret fibers cause a more rapid degradation in collection efficiency and have lower minimum efficiency with time. The pressure drop of a filter media do rarely increase when the collection efficiency decreases to the minimum value. For the larger particles charged by spray electrification, which have charge amounts more than that of Boltzmann equilibrium charge distribution, the pressure drop of a filter media slowly increases in comparison with that of equilibrium charged particles. For DOS particles it is shown that the charging level of an electret filter severely decreases and the collection efficiency is below 10% in some particle size range.

• 한국인쇄학회지
• /
• 제13권1호
• /
• pp.13-24
• /
• 1995

The color filter os made in four methods ; dyeing, printing electrodisposition and pigment dispersed method. Among technologies for color filter manufacture, pigment-dispersed and hybrid method are dominant over all others in commercial manufacture of large scale, fine resolution color filter for liquid crystal display. In this paper to investigate the possibility of the color filter manufacture for LCD by screen printing method, we synthesyzed PVA/sbQ screen emulation for high resolution, estimated image of printed fine pattern and manufactured color filter by screen printing. Results of the study are as follow and found the screen printing method os useful and valid from it. 1. Fine pattern is formed due to photocyclodomerization of -C=C- bond at 342nm, on the other hand unexposured parts are removed in water. 2. sharpness and resolution of fine pattern is improved at mesh streching angle 22.5 and 45 than 0 degree. It is expected due to resistance between inks and mesh streching angles. 3. Spectral characteristics of sample inks were R(640nm), G(535nm), B(470nm), transmittance were R(92%), G(79%), B(70%) and chromaticity coordinate values were R(0.62,0.33), G(0.32,0.59), B(0.14,0.17)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.549-554
• /
• 2002

Recently, interest in hygiene has been arouse in the health care field. Consequently, Filters with antibacterial agent applied to improve air quality by sterilizing bacteria, fungi, etc. We actually installed antibacterial air filter containing 2.5wt%Ag zeolite on the air intake route to air-conditioner in passenger cu, and evaluated filter's performance on antibacterial effect. By the microbe liquid spattering method, we found that the antibacterial air filter has notably sufficient antibacterial efficiency against standard strains and wild type strains. Antibacterial effect was observed at whole area of filter media by zone of inhibition test. The evaluation of microbe quantity was conducted through mixing dilution plate culture method. In comparison with ordinary filter, the amount of germs attached on antibacterial air filters was larger. The amount of germs attached on ordinary filters was very small since ordinary filters contained less dust. In comparison in antibacterial air filter with thickness, the amount of germs attached on 9mm filter was smaller than that of on 6mm filter. i.e. thicker filter, superior efficiency.

• 한국식품영양과학회지
• /
• 제31권4호
• /
• pp.636-641
• /
• 2002

인공재배한 상황버섯 원료의 영양성분은 탄수화물의 함량이 80.9%로 가장 많았고, Na, K, Ca, Fe의 무기질 4종도 비교적 풍부하게 함유되어 있었으나 비타민 B$_1$, B$_2$, C와 같은 수용성비타민은 검출되지 않았다. 가장 바람직한 추출조건은 5% 농도의 원료를 10$0^{\circ}C$의 온도에서 3시간 이내에 추출하는 것으로 나타났다. 추출물의 청정화를 위해서 depth filter pad를 이용한 여과법, 원심분리법 및 여과조제 첨가법 등을 적용한 결과 원심분리와depth filter pad를 이용했을 때 가장 우수한 청정효과를 나타내었고, 7주간 항온저장실험으로 탁도를 비교한 결과에서도 청정도의 변화가 거의 없었다. 결론적으로 상황버섯 추출물은 6,000 rpm이상에서의 원심분리나 8$\mu\textrm{m}$ 이하의 pore size를 지닌 filter system을 이용할 때 청정도를 가장 효과적으로 유지할 수 있었다

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.34-37
• /
• 2007

액체산소를 작동유체로 하여 추진제 공급배관에 대한 충진 및 대기 시험을 수행하였다. 추진제 공급 시스템은 추진제 탱크의 출구에 필터가 장착된 형상이다. 추진제의 충진이 완료된 후 대기 과정동안 액체산소의 증발과 이것이 시스템의 재순환 성능에 미치는 영향을 살펴보았다. 추진제의 충진 속도와 탱크 얼리지의 압력이 배관 내 액체산소의 상태에 영향을 미치는 것을 확인하였다. 필터의 장착 위치로 인해 대기 과정동안 배관 내부에서 geysering 현상은 발생하지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권1호
• /
• pp.3-9
• /
• 1990

Expression is on operation of separating liquid from solid liquid mixtures which has long been used on a universal scale in widely divergent fields. In fruit pulps processing and fermentation industries. removal of a portion of the liquid in filler cake is essential to the maximum yields of products. In sewage sludge treatments, dewatering of filter cakes is important to disposal by incineration. transportation. and landfill. In the chemical process industries, drying of wet cakes increases cost, and it is desirable to eliminate as much liquor as possible by non-thermal methods. This paper is mainly concerned with the development of a simplified equation for constant-pressure expression.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.