• 제목/요약/키워드: liquid consumptions

검색결과 10건 처리시간 0.027초

충남 공주지역 대학생의 식사행동 및 액체섭취실태 조사 (A Survey on Dietary Behaviors and Liquid Consumptions of University Students in Kongju of Chungnam Province in Korea)

  • 김선효
    • Journal of Nutrition and Health
    • /
    • 제42권4호
    • /
    • pp.327-337
    • /
    • 2009
  • University students tend to have various dietary problems including undesirable dietary behaviors, inadequate intakes of nutrients and biased habits of liquid consumption. This study was conducted to find dietary behaviors (n = 357) by questionnaire survey and to examine dietary nutrient intakes (n = 60) and liquid consumption (n = 853) by food record method for 3-days among university students attended in K University of Chungnam province in Korea. Most subjects lived in the dormitory or self-boarding house, and they skipped breakfast most frequently and took breakfast most irregularly among three meals. Dietary mean intakes of energy, Ca, vitamin B2 and folate were lower than the KDRI (37-85%), and those of males were poorer than those of females. Ratios of energy intake among three meals and snacks were not distributed evenly, so the mean energy intake from snacks was higher and that from breakfast was lower than the ideal ratio, respectively. Daily mean consumption of liquid was 1,526.4 mL/d for males and 1,151.5 mL/d for females, and these intakes were more than the KDRI (1,300 mL/d for males and 1,100 mL/d for females). However, their sources of liquid consumption were not desirable because alcohol, soda, juice of fruit or vegetable and beverage mixed with fruit juice and/or vegetable juice were major sources of liquid as well as drinking water. These findings show that university students have poor dietary behaviors including frequent skipping of breakfast, irregularity of meals, inadequate intakes of nutrients and undesirable pattersirablliquid consumption including high portion of alcohol and soda as alliquid source, and these trends were stronger for males than for females. Therefore, we should endeavor to correct their meal problems id ated to dietary behaviors, nutrient intakes and liquid consumptions through nutrition education.

Dimethyl Sulfoxide와 Ethylene Glycol을 이용하여 에탄올 수용액으로부터 고순도 에탄올을 생산하기 위한 추출증류공정 (Extractive Distillation Process for the Production of Highly Purified Ethanol from Aqueous Solution using Dimethyl Sulfoxide and Ethylene Glycol)

  • 노상균
    • 청정기술
    • /
    • 제22권4호
    • /
    • pp.241-249
    • /
    • 2016
  • 본 연구에서는 디메틸설폭사이드(dimethyl sulfoxide, DMSO)와 에틸렌글리콜(ethylene glycol, EG)을 이용하여 에탄올 수용액으로부터 99.7 wt% 이상의 고순도 에탄올을 생산하기 위한 추출증류공정에 대해서 2기의 증류탑 배열과 3기의 증류탑 배열 사이의 공정을 비교하였다. 두 가지 용매를 사용한 3기의 증류탑 배열에 대해서는 총 재비기의 heat duty의 합이 최소가 되는 농축기 상부에서의 에탄올의 조성을 최적화 작업을 통해서 결정하였다. 열역학 모델식으로는 NRTL 액체활동도계수 모델식을 사용하였으며 Schneider electric 사의 PRO/II with PROVISION 9.4를 사용하였다. 용매의 성능은 EG보다는 DMSO가 더 좋은 것으로 나타났으며, 전체적인 유틸리티 소모량에 있어서는 농축기 하부에서 원료 중에 포함되어 있는 액상의 물의 일부를 액상으로 제거하기 때문에 3기의 증류탑 배열이 2기의 증류탑 배열보다 더 우수한 것을 알 수 있었다.

구동장치 및 열교환기 변경에 따른 냉매가열식 열펌프의 성능특성 (Performance of a Refrigerant Heating Type Heat Pump by Changing of Driving Devices and Heat Exchangers)

  • 박윤철;김상혁;김지영
    • 설비공학논문집
    • /
    • 제20권1호
    • /
    • pp.49-56
    • /
    • 2008
  • When the outdoor air temperature decreased less than the freezing temperature, frost forms at the surface of heat exchangers and it makes the performance degradation of a heat pump system. In this study, a heat pump system has been developed which has a refrigerant heating device as an auxiliarly heating equipment. To reduce power consumptions of the system, a liquid pump, rather than a compressor, was used to drive refrigerant in the heat pump cycle. Ratio of refrigerant mass flow between a refrigerant heating heat exchanger(GHX) and a outdoor plate heat exchanger(PHX) was varied and the system performance was measured and analyzed. As results, when the refrigerant flow rate to the GHX was decreased, the system performance is decreased due to heat absorption capability restriction of the GHX and small variation of the power consumption in the compressor. The effect on the evaporating and condensing pressure by the distribution ratio of the refrigerant to the each heat exchanger is small compare to the effect by the frequency change in the compressor. When the compressor was replaced by the liquid pump, the capacity of the system decreased a little, however the power consumption decrease approximately 80% compare with the power used in the compressor.

공기 슬릿 구조를 이용한 공기 부상 컨베이어의 공기 소모량 감소 (Reduction of the air consumption in the air conveyor with the air slit)

  • 이학구;이대길
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.231-236
    • /
    • 2004
  • The area of flat glass panel displays such as LCD (Liquid crystal display) and PDP (Plasma display panel) has been increased more than 2 $\times$ 2 m$^2$ for productivity improvement. However, such a large panel area incurs large panel deflection during panel transfer using robots or AGV (Automated guided vehicle) systems. Therefore, electronic industries are making an effort to find an alternative transfer system for the large glass panels with small deflection. The air conveyor with porous pads is one plausible solution, but it becomes expensive because the large porous pads cost much and air consumption increases as the panel area increases. In this work, a simple air slit levitating conveyor was devised to lower the equipment cost and to reduce the air consumption of system. The air flow model between the LCD glass panel and conveyor was constructed and its validity was verified by experiments. To minimize the air consumption, the conveyor dimensions were optimized, and the air consumptions between the air conveyors with the air slit and that with the porous pad were compared.

  • PDF

넙치 양식장에서 발생하는 온실가스 배출량 산정 (Estimation of Green-House-Gas emissions from domestic aquaculture farm for flounders)

  • 양용수;임한규;이경훈;이동길;신형호
    • 수산해양기술연구
    • /
    • 제51권4호
    • /
    • pp.614-623
    • /
    • 2015
  • This study aims to estimate the Green-House-Gas emissions from domestic farmed flounder in the southern sea and Jeju-Do, where is mainly produced, by the assessment of energy consumptions and GHG emissions from domestic fish farms for establishing reduce standards of greenhouse gas from a sustainable perspective. It needs to analyze such GHG emission components as feed, electricity, fuel, fixed capital, fish respiration, and liquid oxygen in two locations by 4 stage running water type farm size of small, small and medium, large and medium, large scale. The result showed that the mean GHG emissions were $36.83kg{\cdot}CO_2/year$ in the southern sea and $24.33kg{\cdot}CO_2/year$ in Jeju-Do, respectively, in the stage of production per fish 1kg at 2 locations and farm size from domestic farmed flounders, and it will give to be useful for policy, planning, and regulation of aquaculture development with establishing GHG reduction standards.

터보 팽창기를 활용한 NGL 회수공정에서 최적의 탈메탄탑의 운전압력 결정을 통한 냉동 소요동력 최소화에 대한 연구 (A Study on the Minimization of the Refrigeration Power Consumptions Through the Determination of Demethanizer Top Pressure in the NGL Recovery Process Using Turbo-expander)

  • 김유미;조정호
    • 한국산학기술학회논문지
    • /
    • 제12권2호
    • /
    • pp.1032-1037
    • /
    • 2011
  • 본 연구에서는 전처리 공정을 거친 천연가스로부터 에탄 이상의 성분을 회수하기 위한 탈메탄탑에 대한 전산모사와 공정 최적화를 수행하였다. 전처리된 천연가스는 탈메탄탑 상부의 차가운 기상류와의 열교환 및 프로판 냉동 사이클이 포함된 예냉공정을 거친 후에 기상과 액상이 분리된다. 기상은 터보 팽창기를 거치면서 생산되는 동력을 residue gas의 압력을 높이기 위한 압축기에 전달한 후에 부분적으로 응축되어 탈메탄탑 상부로 주입된다. 액상류는 줄-톰슨 팽창 밸브를 거친 후 더욱 냉각되어 탈메탄탑의 중간부로 주입된다. 원료 대비 에탄의 회수율은 80% 이상으로 정하였으며, 탈메탄탑의 탑저에서 에탄에 대한 메탄의 몰비는 0.0119로 정하였다. 한편 프로판 냉동 사이클의 heat duty를 최소화시키기 위해서 원료를 분리하여 side reboiler와 열교환시킴으로써 냉열의 일부를 회수할 수 있었다.

전기자동차 배터리팩 열관리시스템에서 상변화물질 적용에 관한 고찰 (A Study on the Application of Phase Change Material for Electric Vehicle Battery Thermal Management System using Dymola)

  • 최철영;최웅철
    • 전기학회논문지
    • /
    • 제66권12호
    • /
    • pp.1889-1894
    • /
    • 2017
  • Global automobile manufacturers are developing electric vehicles (EVs) to eliminate the pollutant emissions from internal combustion vehicles and to minimize fossil fuel consumptions for the future generations. However, EVs have a disadvantage of shorter traveling distance than that of conventional vehicles. To answer this shortfall, more batteries are installed in the EV to satisfy the consumer expectation for the driving range. However, as the energy capacity of the battery mounted in the EV increases, the amount of heat generated by each cell also increases. Naturally, a better battery thermal management system (BTMS) is required to control the temperature of the cells efficiently because the appropriate thermal environment of the cells greatly affects the power output from the battery pack. Typically, the BTMS is divided into an active and a passive system depending on the energy usage of the thermal management system. Heat exchange materials usually include gas and liquid, semiconductor devices and phase change material (PCM). In this study, an application of PCM for a BTMS was investigated to maintain an optimal battery operating temperature range by utilizing characteristics of a PCM, which can accumulate large amounts of latent heat. The system was modeled using Dymola from Dassault Systems, a multi-physics simulation tool. In order to compare the relative performance, the BTMS with the PCM and without the PCM were modeled and the same battery charge/discharge scenarios were simulated. Number of analysis were conducted to compare the battery cooling performance between the model with the aluminum case and PCM and the model with the aluminum case only.

1-프로판올과 벤젠 혼합물의 압력변환 증류공정을 통한 전산모사 및 공정 최적화 (Computer Simulation and Optimization Study on the Pressure-Swing Distillation of 1-propanol-benzene Mixture)

  • 박회경;조정호
    • 한국산학기술학회논문지
    • /
    • 제19권6호
    • /
    • pp.88-97
    • /
    • 2018
  • 압력변환 증류공정(Pressure-Swing Distillation, PSD)을 통해서 1-프로판올과 벤젠 이성분계 혼합물의 분리공정에 대한 전산모사 및 공정 최적화를 수행하였다. Schneider Electric사의 PRO/II with PROVISION V10.0을 사용하였으며, 열역학 모델식으로는 NRTL 액체 활동도계수 모델식을 적용하였다. 고압에서 저압 증류탑 배열 공정과 저압에서 고압 증류탑 배열공정에 대한 재비기의 총 heat duty의 소모량의 합을 서로 비교하였다. 유틸리티 소모량을 최소화하기 위해서 각 공정의 저압 증류탑과 고압 증류탑 상부 벤젠의 조성, 이론단수와 원료 주입단의 위치를 최적화하였으며, 각각의 증류탑의 환류비를 조절하였다. 공정 최적화 수행결과, 총 재비기 heat duty 값은 각각 고압에서 저압 증류탑 배열 공정의 경우 $3.10{\times}10^6kcal/h$ 이었으며, 저압에서 고압 증류탑 배열 공정의 경우 $2.75{\times}10^6kcal/h$로 나타났다. 또한, 저압-고압 증류탑 배열 공정에 열통합 공정(heat integration)을 적용한 경우 재비기의 총 heat duty 값이 고압-저압 증류탑 배열 공정에 비해서 약 57.36%정도 적게 추산되었다.

헬륨 냉동사이클을 이용한 수소액화 공정모사 연구 (Simulation Study of Hydrogen Liquefaction Process Using Helium Refrigeration Cycle)

  • 박회경;박진수
    • 공업화학
    • /
    • 제31권2호
    • /
    • pp.153-163
    • /
    • 2020
  • 액체 수소는 기체 수소 부피의 약 1/800로 감소시킬 수 있어 동일 압력에서 기체 수소 대비 800배의 체적 에너지 밀도를 가지고 있고, 기체 수소에 비해 폭발 위험성이 낮고 수송이 용이하다는 장점이 있다. 하지만 수소 액화를 위해서는 대규모 시설투자가 필요하고, 단순 압축 저장방식에 비해 많은 에너지가 필요함으로써 경제성 문제가 수반된다. 따라서 에너지 절감형 수소액화공정 연구는 매우 중요하다고 볼 수 있다. 본 연구에서는 수소 액화를 위한 주요 공정으로 헬륨/네온(몰 비 80 : 20) 냉동사이클을 선정하고 화학공정모사기 AVEVA 사의 PRO/II ver. 10.2를 이용하여 공정모사 및 에너지 사용량을 도출하였다. 수소 액화를 위해 헬륨/네온 냉동사이클만을 사용하는 경우, SMR+헬륨/네온 냉동사이클을 사용하는 경우, C3-MR+헬륨/네온 냉동사이클을 사용하는 경우 에너지 사용량을 상호 비교하였다. 그 결과 수소 1 kg을 액화하는데 소요되는 압축기 총 소요 동력은 각각 16.3, 7.03, 6.64 kWh이었다. 헬륨/네온 냉동사이클만을 사용하는 것보다 상용화되어 있는 SMR 공정이나 C3-MR 공정을 사용하여 예냉하는 경우 에너지를 크게 절감할 수 있는 것을 확인하였다.

목련(Magnolia kobus DC.)에서 분리한 흰비단병균(Sclerotium rolfsii Sacc.)에 관한 연구 (Studies on Sclerotium rolfsii Sacc. isolated from Magnolia kobus DC. in Korea)

  • 김기청
    • 한국응용곤충학회지
    • /
    • 제13권3호
    • /
    • pp.105-133
    • /
    • 1974
  • 본 연구는 목련에서 분리한 흰비단병균 Sclerotimu rolfsii Sacc.의 분화형을 밝히고 균계생장 및 균핵형성에 대한 영양생리를 구명코저 vitamin, 질소원, 탄소원의 효과를 검토했으며 또 본 균과 Penicillium sp.와의 생태적 관계를 해명하기 위한 기초적인 연구로서 본 균의 균계생장 및 균핵형성에 대한 Penicillium 배양여액의 촉진효과와 그 요인을 밝히려고 시도하였다. 본 연구결과를 종합해서 적요하면 다음과 같다. 1. 목연에서 분리한 흰비단병균 제1형, 축2형은 배지상의 성상이나 생리적 성질 펄 병원성이 상이하였다. 특히 목연 아카시아에 대한 병원성은 양자 동일하나 콩이나 오이에 대해서는 제2형균이 제1형균보다 더 강하였다. 2. 공시된 14종의 질소원중 $KNO_2$와 glycine을 제외하고는 모두 thiamine hydrochloride 10r/l가 첨가되었을 때 비로소 공시균의 균계생장 및 균핵형성에 이용되었다. 질소의 형태별로 보면 균계생장에 있어서는 $NO_3-N$보다는 $NH_4-N$이 훨씬 더 효과적이며 organic N은 화합물에 따라 상이하였다. 그러나 균핵형성에 있어서는 이와 반대로 $NO_3-N$이 효과적이었다. $NO_2-N$은 균계생장이나, 균핵형성에 전혀 효과가 없었다. 3. 공시 탄소원 7종도 대체적으로 thiamine이 존재하지 않는 한 균계생장이나 균핵형성에 아무런 효과가 없었다. thiamine이 첨가될 경우 균계생장에 있어서 glucose와 saccharose가 가장 효과적이고 maltose와 soluble starch는 효과가 적었으며 xylose, lactose, glyceline은 전혀 효과가 없었다. 균핵형성에 있어서는 loctose를 제외하고는 전구에서 균핵형성을 보였으며 모두 비슷한 효과를 나타냈다. 4. 배지중의 질소원이 동일수준이면 탄소원이 증가함에 따라 균계생장량이 증가하였다. 그러나 질소원의 량에는 한도가 있는 것으로 질소 0.5g/l이상에서는 오히려 균계생장이 억제되었다. 그러나 균핵형성에 있어서는 탄소원의 증가에 따라 균핵형성량이 저하하였다. 5. 공시균은 thiamine 결핍균으로서 균계생장 최적 thiamine 농도는 20r/l이고 이 농도를 초과하면 오히려 균계생장이 억제되는데 150r/l에서는 무첨가구와 거의 같은 정도로 억제되었다. 6. 공시균의 생장에 있어서 thiamine의 첨가에 따른 질소원리용도는 $NH_4NO_3>(NH_4)_2SO_4>asparagine>KNO_3$의 순위이며 질소원별 thiamine 최적요구량은 $KNO_3$인 경우 12r/l, asparagine인 경우 16r/l 정도였다. 균핵형성량에 있어서는 $KNO_3>NH_4NO_3>asparagine>(NH_4)_2SO_4$의 순위로서 thiamine 최적량은 $KNO_3,\;NH_4NO_3$인 경우 8r/l에서 전균핵생산량의 대부분이 형성되나 asparagine인 경우에는 16r/l 정도였다. 7. 배양액의 pH는 공시균이 생장을 개시하자마자 3.5정도로 급격히 떨어지나 그 이후부터는 생장량이 증가함에 따라 완만하게 떨어졌다. 그러나 pH2.2 이하로는 더 내려가지 않았다. 8. 공시균의 균계생장에 대한 각종 vitamin의 상호효과는 thiamine, biotin, pyridoxine, inositol의 4가지 조합에 있어서도 thiamine이 첨가되지 않은 곳에서는 거의 효과가 나타나지 않았다. 그러나 thiamine+pyridoxine, thiamine+inosital, thiamine+biotin+pyridoxine, thiamine+pyridoxine+inositol구에 있어서는 thiamine 단독 첨가구와 동등 혹은 그 이상의 효과를 나타내지만 thiamine+biotin과 thiamine+biotin+inosital구는 오히려 떨어졌다. 균핵형성에 있어서는 thiamine 단독구에 비하여 각구 모두 약간씩 증가하였다. 9. Penicillium 배양여액중에는 공시균의 균계생장을 촉진하는 물질이 존재하며 배양여액 6-15ml/50ml 배양액의 농도에서 거의 최고균계생장량에 달하였다. 10. 질소원으로서 첨가한 $NH_4NO_3$ 혹은 asparagine은 균계생장에 있어서 배양여액농도 여가에 관계없이 $NH_4NO_3$가 더 유효하였다. 11. 배양여액에 대한 일련의 처리에 있어서 휘발성물질분획, 비휘발성물질분획, 휘발산분획, ether 가용성유기산분획, ether 불용성물질분획, cation 흡착물질분획, cation 비흡착물질분획, anion 흡착물질분획 및 비흡착물질분획의 9분획중 비휘발성물질분획, ether 불용물질분획, cation 흡착물질분획 및 anion 비흡착물질분획에서만 균계가 잘 자랐다. 그러나 균핵은 오직 cation 흡착물질분획에서만 형성되었다. 12. 이 결과는 배양여액중에 균계생장물질, 균핵형성물질 및 균핵형성억제물질이 존재하며 이들 물질은 각각 별개의 물질로서 전2자는 비휘발성이고 ether 불용성이며 cation교환수지에는 흡착되지 않는 물질이며 후자는 비휘발성이고 ether 불용성이며 cation 및 anion 교환수지에 흡착되지 않는 물질임을 암시한다. 13. DNP-aminoacids paper chromatography에 의하여 cation 교환수지흡착분획중에서 aspartic acid, cystine, glycine, histidine, lycine, tyrosine 및 dinitroaniline 7종의 아미노산이 검출되었다. 14. S. rolfsii의 균계생장 및 균핵형성은 glutamic acid, aspartic acid, cystine, histidine 및 glycine의 단독첨가나 혼합첨가에 의해서 촉진되지 않았고 다만 tyrosine에 의해서 약간 촉진되었다. 15. 균핵의 습열에 대한 저항성은 균핵의 수분함유량에 따라 다르며 수분함유량이 적은 것이 보다 더 강하였다. 배지에서 채취한 균핵은 제1,2형균 모두 $52^{\circ}C$에서 5분에 사멸하거나 155일간 $26{\circ}C$에서 건조시킨 것은 $52^{\circ}C$에 있어서 제1형균은 15분, 제2형균은 10분, $57^{\circ}C$에 있어서는 제1형균은 5분, 제2형균은 10분처리에 사멸하였다. 16. 배양균핵을 132일간 $26^{\circ}C$에서 건조시킨 것은 제1,2형균 모두 전부 발아하였고 기건상태에서 283일간 방치한 천연균핵도 제1,2균형 모두 발아하였으며 443일간처리한 것도 아직 제1형균 $20\%$, 제2형균 $16$의 발아율을 보지하고 있었다. 17. 저온에 대한 저항성은 균계, 균계괴, 균핵의 순으로 강하였는데 균계는 $-7--8^{\circ}C$ 1주간 처리에서 완전 사멸하였으나 균계괴는 $-17--20^{\circ}C$ 3주에서도 아직 사멸치 않은 것이 있었으며 균핵은 $-17--20^{\circ}C$ 3주에서 대부분 생존하였다. 18. 약제저항력은 승괴수 $0.05%$에 있어서 제1형균은 180분 제2형균은 240분, $0.1\%$에 있어서는 제1형균 60분, 제2형균 30분에 각각 사멸하였고, Uspulun 800배에 있어서는 제1형균은 120분에 사멸하나 제2형균은 180분에도 사멸치 않으며 500배에 있어서는 제1,2형균 모두 90분에 비로소 사멸하였다. 그러나 유산동 $5\%$ 240분, Ceresan 석탄, Mercuron 각 500배 80분처리에도 아무런 영향이 없었다. 19. Benlate와 Tachigaren의 농도가 증가함에 따라 균계생장 억제효과도 증가하였다. 처리 6째에는 Benlate 0.5ppm을 제외하고는 전농도에서 뚜렷한 억제효과를 나타내었으나 12일째에는 농도에 따라 현저한 차이를 나타냈다. Benlate 0.5ppm 처리는 대조구에 비하여 $66\%$, 2.0ppm은 $92\%$의 억제효과를, Tachigaren은 1ppm $54\%$, 1.5ppm과 2.0ppm은 $77\%$의 억제효과를 나타냈다. 양자 모두 500ppm에서는 거의 완전히 균계생장을 억제시켰다. 균핵형성은 Benlate 500ppm과 Tachigaren 500ppm 및 1000ppm에서 $100\%$ 억제되었다. 20. 일반적으로 균계생장량이 증가함에 따라 배지중의 glucose나 $NH_4-N$의 소비량도 증가하였으나 Benlate나 Techigaren을 처리할 경우 그 농도의 증가에 따라 이들의 소비량이 억제되었다. 그러나 Benlate 저농도(0.5ppm 및 1ppm)에 있어서는 $NH_4-N$의 소비가 무처리구보다 많았다. 21. glucose와 $NH_4-N$의 흡수이용효과 즉 glucose나 $NH_4-N$ 1mg을 소비하여 생산된 균계량은 Benlate나 Techigaren의 처리로 말미암아 크게 저하되었다. 그 정도는 농도에 관계없이 처리 3일째에 가장 심했고 이후 시일이 경과함에 따라 높아졌다. Benlate 처리의 glucose를 제외하고는 대체로 농도가 증가함에 따라 흡수이용효과가 저하되었다. 22. 토양배양에 있어서 $CO_2$ 배출량으로 측정한 균계생장은 어느 농도에서나 저지되지 않았고 다만 Tachigaren 100mg/g 토양에서만 현저하게 억제되었다. 균핵형성은 Benlate나 Tachigaren 10mg/g 토양에서 완전히 억제되었다. 23. Benlate와 Tachigaren 0.1, 1.0, 10, 100, 1000ppm에 10분 및 20분간 침지처리한 결과 균핵의 발아억제효과를 인정할 수 없었다.

  • PDF