• Title/Summary/Keyword: liquid cell

Search Result 1,650, Processing Time 0.027 seconds

Cell gap measurement method far single-polarizer reflective liquid crystal cells (분광기를 이용한 반사형 TN LCD의 셀갭 측정)

  • 이기동;박경호;이서헌;윤태훈;김재창
    • Korean Journal of Optics and Photonics
    • /
    • v.12 no.6
    • /
    • pp.468-471
    • /
    • 2001
  • A novel method to measure the cell gap of a single-polarizer reflective twisted nematic liquid crystal (TN LC) cell by using a rotating polarizer technique is proposed. By rotating an LC cell, we can measure the cell gap of an LC cell as well as the wavelength dependence of retardation under the condition that the twist angle is known.

  • PDF

Studies on the Air-Liquid Interface Culture as an Experimental Model for Physiology and Pharmacology of Tracheal Epithelial Cells (기관(氣管) 상피세포 생리 및 약리 실험모델로서의 공기-액체 접면 일차배양법 연구)

  • 이충재;이재흔;석정호;허강민
    • Biomolecules & Therapeutics
    • /
    • v.10 no.4
    • /
    • pp.281-286
    • /
    • 2002
  • In this study, we intended to get a preliminary data for establishing rat tracheal surface epithelial(RTSE) cell culture system as an experimental model for physiology and pharmacology of tracheal epithelial cells. Primary culture on the membrane support and application of the air-liquid interface system at the level of cell layer were performed. The cell growth rate and mucin production rate were measured according to the days in culture. The results were as follows: this culture system was found to manifest mucocilliary differentiation of rat tracheal epithelial cells, the cells were confluent and the quantity of produced and released mucin was highest on culture day 9, the mucin was mainly released to the apical side and tbe free $^3{H}$-glucosamine which was not incorporated to process of synthesis of mucin was left on the basolateral side. Taken together, we suggest that air-liquid interface culture system can be used as a substitute for immersion culture system and as an experimental model for in vivo mucus-hypersecretory diseases.

A study on the total cell count variation of commercial liquid seed by adding PAC and PAS (PAC 및 PAS 첨가에 따른 상업용 액상 종균제의 총균수 변화에 관한 연구)

  • 박미자;박경식;김승재
    • Journal of environmental and Sanitary engineering
    • /
    • v.16 no.2
    • /
    • pp.79-90
    • /
    • 2001
  • Commercial liquid seeds are used for supplying active microbial flora to organic wastewater treatment plants of high feed-to-microorganism ratio and to maintain optimal microbial condition during unsteady state operation of the biological wastewater treatment plant. In addition to bacterial cells, the liquid weeds contain various additives for special purposes as well as organic substrates for energy supply. The additives give physical stability for the maintenance of microbial decomposition activity and ability to control the overgrowth of seed strains. In this work, the effects of addition of two kinds of typical substrate additives, poly aluminum chloride(PAC) and poly aluminum sulfate(PAS) on the consitutional total cell counts(CFU/ml) of four kinds of reorganization liquid seeds(RLS I, RLS II, RLS III and RLS IV) were studied experimentally. The addition of PAC and PAS gave negative effect on TCC constitution for the four seeds studied.

  • PDF

Recent Progress in Nanoparticle Synthesis via Liquid Medium Sputtering and its Applications

  • Cha, In Young;Yoo, Sung Jong;Jang, Jong Hyun
    • Journal of Electrochemical Science and Technology
    • /
    • v.7 no.1
    • /
    • pp.13-26
    • /
    • 2016
  • Nanoparticles (NPs), which have been investigated intensively as electrocatalysts, are usually synthesized by chemical methods that allow precise size and shape control. However, it is difficult to control the components and compositions of alloy NPs. On the other hand, the conventional physical method, sputtering with solid substrates, allows for facile composition control but size control is difficult. Recently, “liquid medium sputtering” has been suggested as an alternative method that is capable of combining the advantages of the chemical and conventional physical methods. In this review, we will discuss NP synthesis via the liquid medium sputtering technique using ionic liquid and low-volatile polymer media. In addition, potential applications of the technique, including the generation of oxygen reduction reaction electrocatalysts, will be discussed.

Electro-optical Properties of Twisted Nematic Liquid Crystal Cell with Silver Nanowire Network Electrodes

  • Jang, Kyeong-Wook;Han, Jeong-Min;Shon, Jin-Geun
    • Journal of Electrical Engineering and Technology
    • /
    • v.12 no.1
    • /
    • pp.284-287
    • /
    • 2017
  • This paper introduces liquid crystal (LC) alignment and its electro-optical properties in the LC cells with silver nanowire (AgNW) networks. The AgNW network was used as an electrode of LC cell as a substitute for an indium-tin-oxide (ITO) film. LC alignment characteristics in the LC cell using AgNW networks, which have two different sheet resistances of $60{\Omega}/m^2$ and $80{\Omega}/m^2$, were observed. The LC alignment characteristics including pretilt angle, LC alignment state, and thermal stability are similar irrespective of sheet resistance of AgNW network. However, twisted-nematic (TN)-LC cell normally operated when using AgNW network with sheet resistance of $80{\Omega}/m^2$. Electrooptical properties of TN-LC cell exhibited competitive performance compared to those of TN-LC cell based on conventional ITO electrode, which allow new approaches to replace conventional ITO electrode in display technology.

Fast Response Characteristics in Liquid Crystal Display in the High birefringence nematic liquid crystal (고굴절 네마틱 액정에서의 액정 디스플레이의 고속응답 특성)

  • Kim, Jong-Hwan;Hwang, Jeoung-Yeon;Seo, Dae-Shik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.498-501
    • /
    • 2003
  • We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$. The fast response time of TN cell using high birefringence with ${\Delta}nd=0.363$ on the rubbed PI surface was measured 5.1 ms.

  • PDF

Electro-optical performance using a PDT-VA cell (PDT-VA 셀을 이용한 전기광학 특성)

  • 김형규;황정연;서대식;한은주;김재형
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2000.11a
    • /
    • pp.133-136
    • /
    • 2000
  • We investigated the improvement of viewing angle using a patterned double twisted (PDT) vertical-alignment (VA) cell mode on a homeotropic alignment layer. Good voltage-transmittance curves for negative dielectric anisotropic nematic liquid crystal (NLC) using the PDT-VA cell without a negative compensation film were obtained. The viewing angle of the PDT-VA cell without a negative compensation film was wider than that of a conventional VA cell.

  • PDF

Electro-optical performance using a PDT-VA cell (PDT-VA 셀을 이용한 전기광학 특성)

  • 김형규;황정연;서대식;한은주;김재형
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.133-136
    • /
    • 2000
  • We investigated the improvement of viewing angle using a patterned double twisted (PDT) vertical-alignment (VA) cell mode on a homeotropic alignment layer. Good voltage-transmittance curves for negative dielectric anisotropic nematic liquid crystal (NLC) using the PDT-VA cell without a negative compensation film were obtained. The viewing angle of the PDT-VA cell without a negative compensation film was wider than that of a conventional VA cell.

  • PDF

Carbon nanotube effects on physical properties of liquid crystal and electro-optic characteristics of in-plane switching liquid crystal cell (카본나노튜브가 액정의 물성과 in-plane switching 셀의 전기광학 특성에 미치는 영향)

  • Jeon, Sang-Youn;Jeong, Seok-Jin;Jeong, Seok-Ho;Shin, Seung-Hwan;An, Kay-Hyok;Kang, Hoon;Kim, Kyoung-Jin;Lee, Seung-Hee;Lee, Young-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2006.11a
    • /
    • pp.47-48
    • /
    • 2006
  • Carbon nanotubes (CNTs)-doped homogeneously aligned nematic liquid crystal (LC) cells driven by in-plane field were fabricated and their electro-optic characteristics were investigated. Effective cell retardation values in an absence of an electric field between doped and undoped LC were the same each other. In the presence of an electric field, however, measured effective cell retardation value was smaller in the CNT-doped cell than in the undoped cell so that the transmittance was slightly smaller in the CNT-doped cell than in the undoped cell. In addition, the CNT-doped cell exhibited slight increase in driving voltage and decrease in response time compared to the undoped cell. The CNT effects on electro-optic characteristics of the cell were discussed.

  • PDF

A Study on the Characteristic of Twisted Nematic Liquid Crystal Cell by Three Dimensional Finite Element Method (3차원 유한요소법을 이용한 TN 모드 액정 셀 특성 분석 연구)

  • 정주식;윤상호;이철수;윤석인;원태영
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.12
    • /
    • pp.1071-1079
    • /
    • 2002
  • This paper reports a methodology and application lot calculating distribution of the director in a liquid crystal cell by a numerical technique. To calculate distribution of the director, we applied a three dimensional finite element method (FEM) and calculated the distributions of electric potential and director in the liquid crystal cell. We have considered the free-energy density in the bulk of liquid crystal cell and calculated the switching property by the Ericksen-Leslie equation and the Laplace equation. We have calculated the optical transmission with distribution of the director by Berreman's method and confirmed the threshold voltage and the response time.