• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.56-63
• /
• 2013

In this study, paper mill applicability of two kinds of cotton pulps which have different initial freeness, fiber length and intrinsic fiber strength were investigated. Basic properties such as CED viscosity, fiber length, and crystallinity of major two kinds of cotton pulps were analyzed, and beatability of cotton pulps and physical properties of handsheet made from two kinds of cotton pulps were compared. Laboratory beating was performed at different refining conditions such as refining loads and freenesses. Relationship between beating degree and physical properties of handsheet were compared to seek optimum condition of refining for different cotton pulps application to paper mill.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.157-167
• /
• 2011

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.348-355
• /
• 2000

The study was conducted to determine physicochemical parameters in various physical fractions (linter, hull, kernel, oil and meal) of cottonseed of different varieties (MNH 147, CIM 240, NIAB 78, FH 87, CIM 109, MNH 93, FH 682, GOHAR 87, SLS 1 and B 557). Average components of linter, hull, and kernel in different varieties of cotton were 12.21, 28.24 and 70.42%, respectively. Average percentage of meal and oil was 48.97 and 22.09% in seed, and 69.28 and 30.72% in kernel, respectively. Maximum percentage of meal was recovered from variety CIM 240 and lowest in variety CIM 109. Statistical analysls revealed variety differences (p<0.05) in seed and it's components. Average contents of crude protein, crude fiber and ash was 22.31, 17.74 and 4.27% in seed, 2.85, 56.50 and 2.61% in hull; 32.62, 3.45 and 4.01 % in kernel; 47.15, 5.00 and 5.78% in meal, respectively. Average contents of Ca, p, Mg, K, Na and Cl were 0.09, 0.22, 0.26, 0.65, 0.009 and 0.035% in seed; 0.12, 0.07, 0.09, 0.51, 0.020 and 0.034% in hull and 0.16, 0.59, 0.32, 1.01, 0.03 and 0.07% in meal of different varieties of cotton, respectively. Fe, Zn, Cu and Mn were 141.35, 24.55, 186.50 and 27.12 mg/kg in seed; 158.48, 2.06, 74.60, and 22.17 mg/kg in hulls; and 167.62, 20.30, 185.83 and 20.67 mg/kg in meal, respectively. Significant varietal differences were observed in proximate composition and mineral contents of cottonseeds and derived products. Cottonseeds and their products of varieties FH 87, CIM 109 and MNH 93 showed higher nutrient density while lower was observed in varieties CIM 240, SLS I and FH 682.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.9 no.14
• /
• pp.49-58
• /
• 1986

Those facts I have studied on the theoretical characteristics of stock price earning ratio related with firm evaluation are as followings. First, I have investigated stock valuation analysis under certainty in view of Miller's, Modigliani's and Linter's theories in Chapter Ⅱ, and it is found that stock valuation under uncertainty to which the basic model of MM theory and the concept of capitalization ratio are applied is the same output, as in the case under certainty. And I have examined the stock valuation of growth corporations in which net investment, total capitals and operating profits are expected. Second, I have reexamined the fact that stock price profits are the erotical indices of firm valuation and the firm valuation on the basis of stock price earning ratio in Chapter III. As a whole, I have surveyed the stock price earning ratio theory of the growth stocks and there have been found some problems as such scholars as Malkiel and others have suggested focusing on the stock price structure of growth stocks. To conclude, there must be incessant efforts for the study of security analysis to make it develop ideally.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.11a
• /
• pp.49-56
• /
• 1988

자동차의 동력전달 수단으로 사용되는 클러치는 그 기능에 따라 수동식과 자동식으로 구분된다. 전자의 경우 transmission과 engine의 동력을 dry contact mechanism으로 단속 제어하는 반면 후자는 hadraulic torque drive와 engine의 동력을 transmission box내의 기어유에 의한 wet contact mechanism으로 단속 제어한다. 자동식 클러치에 사용되는 paper facing은 cellulose fiber를 기본으로 하여 열경화성 수지 및 무기충진제등을 함유하고 있으나, 특히 무기충진제의 종류 및 첨가량이 paper facing의 마찰특성에 크게 영향을 미친다. 본 연구는 목재펄프(wood pulp), 린터펄프(linter pulp)등의 펄프를 주체로 하고 열경화성 수지와 무기충지제등을 첨가한 마찰재를 제조하여 무기충진제들의 마찰특성에 미치는 영향을 조사함으로써 paper facing의 기초 자료를 얻는데 그 목적이 있다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.1
• /
• pp.64-74
• /
• 2001

This study is to find the effect of the molecular weight distribution of components on the freeness and physical properties of paper by observing the change of properties according the modification of fibers by using production technology and process technology together to develop additives which can effectively control according to the purpose of paper-making process and by combining low molecular weight cellulase (below MW 20,000; CMC activity 400 unit) with different enzyme's molecular weight and activity and high molecular weight cellulase(MW 20,000∼80,000;CMC activity 90,000 unit) and then process them in Sw-BKP(Softwood Bleached Kraft Pulp) and Hw-BKP(Hardwood Bleached Kraft Pulp) and Cotton Linter Pulp and OCC(Old Corrugated Container) with different properties of pore of surface of fibers respectively, since it is judged that making the appropriate composition ratio of components is necessary in consideration of the properties of fibers and paper-making process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.240-247
• /
• 2012

Dietary supplementation with conventional linted cottonseed hulls (LCSH) is a common practice in livestock production all over the world. However, supplementation with mechanically delinted cottonseed hulls (DCSH) and cottonseed linter residue (CLR) is uncommon. Cottonseed by-products, including LCSH, DCSH and CLR, were assessed by chemical analysis, an in situ nylon bag technique, an in vitro cumulative gas production technique and in vitro enzyme procedure. The crude protein (CP) content of CLR (302 g/kg dry matter (DM)) was approximately 3 times that of LCSH and 5 times that of DCSH. The crude fat content was approximately 3 times higher in CLR (269 g/kg DM) than in LCSH and 4 times higher than in DCSH. Neutral detergent fibre (311 g/kg DM) and acid detergent fibre (243 g/kg DM) contents of CLR were less than half those of DCSH or LCSH. Metabolisable energy, estimated by in vitro gas production and chemical analyses, ranked as follows: CLR (12.69 kJ/kg DM)>LCSH (7.32 kJ/kg DM)>DCSH (5.82 kJ/kg DM). The in situ degradation trial showed that the highest values of effective degradability of DM and CP were obtained for CLR (p<0.05). The in vitro disappearance of ruminal DM ranked as follows: CLR>LCSH>DCSH (p<0.05). The lowest digestibility was observed for DCSH with a two-step in vitro digestion procedure (p<0.05). The potential gas production in the batch cultures did not differ for any of the three cottonseed by-product feeds. The highest concentration of total volatile fatty acids was observed in CLR after a 72 h incubation (p<0.05). The molar portions of methane were similar between all three treatments, with an average gas production of 22% (molar). The CLR contained a higher level of CP than did LCSH and DCSH, and CLR fermentation produced more propionate. The DCSH and LCSH had more NDF and ADF, which fermented into greater amounts of acetate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.356-359
• /
• 2000

The study was conducted to evaluate the nutritional value of seeds and various seed fractions of different varieties of cotton (MNH 147, CIM 240, NIAB 78, FH 87, CIM 109, MNH 93, FH 682, GOHAR 87, SLS I and B 557). Linter, hull, kernel and meal were obtained from cottonseed by physical and chemical methods. Free gossypol and available lysine contents of seed and it's fractions were determined. In vitro protein digestibility of cottonseed meal was also determined. Free gossypol and available lysine contents ranged between 0.22-2.26% and 0.64-1.32% in seed, and 0.03-0.29% and 1.38-2.36% in meal, respectively. FH 87 was highest both in free gossypol and available lysine content, and NIAB 78 was lowest in free gossypol content and FH 862 was lowest in available lysine content. In vitro protein digestibility of cottonseed meal ranged between 66,02-79,96%. Statistical analysis revealed significant (p<0.05) varietal differences in free gossypol, available lyslne and in vitro protein digestibility of cottonseed and derived products.