• 한국도서관정보학회지
• /
• 제51권1호
• /
• pp.115-143
• /
• 2020

4차 산업혁명 시대의 도래로 데이터 중심의 융합 연구가 증가하고 있다. 이러한 연구는 정보의 식별 및 연계의 중요성을 증가시키고 있어, 이를 지원하기 위한 학술정보의 효과적인 관리 및 유통을 위한 방안 모색이 필요하다. 이에 본 연구는 국내외 주요 학술정보서비스 12개의 식별체계 현황과 연계 가능한 정보를 분석하여 학술정보를 식별하고 연계할 수 있는 방안을 제안하고자 하였다. 현황 분석은 2차에 걸쳐 진행되었으며, 각 서비스가 제공하고 있는 학술정보의 유형과 검색 가능한 항목, 연계 정보 유형, 사용 중인 식별체계 등을 살펴보았다. 분석 결과, 국내외 주요 학술정보서비스들은 영구 식별자와 더불어 자체 식별자를 중심으로 평균 3~4개의 정보를 직·간접적으로 연계하고 있다. 또한, 기계학습 방법론을 기반으로 하여 동일 학술정보를 반자동으로 식별하고, 해당 데이터를 수집, 구축하고 있다. 상기 분석 결과를 바탕으로 실무적인 측면에서 영구 식별자 중심의 학술정보 연계 방안과 사회적인 측면에서 기관 협력 네트워크 기반의 연계 방안을 제안하였다.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.147-158
• /
• 2011

This study analyzed the linkage characteristics between road runoff and the nearest streams in mountain regions using a discriminant analysis. The road-to-stream linkage is an important characteristic to evaluate whether the contaminant on road surface is transported directly into the nearby channel system. This study evaluated a total of 51 drainage outlets of mountain roads near the Soyanggang Dam. The linkage between road and stream, slope and width of road, and other information necessary for the discriminant analysis have been collected by in situ investigation and by analyzing the Digital Elevation Model. Finally, as independent variables in the discriminant analysis, the contributing road representing the road characteristics (similar to the runoff from the road drainage outlet) and the distance and slope of the connecting channel between road and nearest stream were selected. Among these three, the distance was found to have the highest discriminant power, the contributing road the lowest. Using the discriminant function derived, 40 out of 51 cases (78.4%) were correctly discriminated and the remaining 11 cases (21.6%) were wrongly discriminated. Reasons of wrongly discriminated cases were mainly due to change in drainage outlet direction, excessive runoff, change in road-to-stream path, etc. This result also indicates that the road-to-stream linkage can be introduced or prohibited by exactly the same way.

• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.1093-1099
• /
• 2016

현재 우리나라의 수도권 전철역이 499개가 있지만 철도역과 연계수단간의 연계영향권에 대한 연구가 많지 않다. 대부분 진행된 연구들은 연계영향권보다는 접근영향권에 대한 연구가 주를 이루고 있다. 또한 연계영향권의 연구들은 설문조사와 기초통계자료를 이용하여 연계영향권의 설정에 대한 이론적기반과 분석기법에 한계를 가지고 있다. 본 논문에서는 새로운 연계영향권을 설정 방법론을 정립하고 이를 빅데이터인 교통카드 이용자들의 철도역 이용 공간자료와 GIS 기반 연계영향권 분석 기법을 접목하여 수단별 네트워크 통행시간기반 연계영향권 설정 연구를 수행 하였다. 연구결과 마을버스 15분이내, 지선버스 20분이내, 간선버스 25분 이상 등의 연계영향권이 네트워크 접근시간의 차이에 따라 명확히 구분됨을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권3호
• /
• pp.309-312
• /
• 2004

We performed exon trapping in order to locate functional genes on chicken chromosomes (GGA) and to identify functional gene sequences from chicken cosmids. Sequence analysis of 100 clones revealed 17 putative exons, five of which were identified with known sequences in a gene database search: thymopoietin beta (TMPO), U5 snRNP-specific 40 kDa protein (HPRP8BP), dihydropyridine receptor alpha 1 subunit (CACNL1A3), cystein string protein (CPS) and C15orf4. We attempted to map the genes to chicken chromosomes by using FISH and linkage analysis. The chromosomal localizations were GGA1 (TMPO), GGA10 (C15orf4), GGA23 (HPRP8BP) and GGA28 (CPS) by FISH and linkage analysis, while that of CACNL1A3 was predicted to be on a microchromosome by FISH but not by linkage analysis. Comparative mapping analyses between chickens and humans for the genes revealed both known and new synteny. The syntenic conservation between GGA1 and human chromosome (HSA) 12q23 (TMPO) and between GGA10 and HSA15q25 (C15orf4), were consistent with a recent publication, while two new syntenies were observed between GGA28 and HSA20q13.3 in CPS and between GGA23 and HSA1p34-35 in HPRP8BP. The information of presently mapped genes can contribute as anchor markers based on functional genes and the construction of a comparative map.

• 무역학회지
• /
• 제47권1호
• /
• pp.115-130
• /
• 2022

In this study, I focus on analyzing how the effects of implementing ETS are different depending on whether Korean ETS linking with carbon markets in other countries. The global computable general equilibrium (CGE) model built in this study analyzes the chages in the production and trade of industrial sectors according to the international linkage of ETS compared to the reference scenario of emissions reduction targets and implementation of ETS. From the analysis of internatioanl linkage of carbon markets scenarios, Annex B countries-South Korea carbon market linkage with individual ETS in China worse the economic outcomes in South Korea the most. This means South Korea lose the international competitiveness compared to China in this scenario. On the other hand, Annex B-China carbon market linkage with Korean individual ETS implementation reduce the decreases in production and trading. The most effective way is to join a global emissions trading market with China. The results are consistent in most industries of South Korea. These results are caused by that the supply of emission allowance is increased and the price of emissions allowances is dropped by China's participation to the carbon market, which can be understood to reduce the carbon reduction cost for industrial sectors. In addition, it can be also concluded that the determinant of the negative impact of ETS on changes in production and trade is more sensitive to the price of emissions allowances than to the characteristics of production and trade structure.

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.83-98
• /
• 2010

In this paper, the mass optimization of four bar linkages is carried out using genetic algorithms (GA) with single and dual constraints. The single constraint of bending stress and the dual constraints of bending and buckling stresses are imposed. From the movement response of the bar linkage mechanism, the analysis of the mechanism is developed using the combination of kinematics, kinetics, and finite element analysis (FEA). A penalty-based transformation technique is used to convert the constrained problem into an unconstrained one. Lastly, a detailed comparison on the effect of single constraint and of dual constraints is presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.812-815
• /
• 1997

A dynamic model of air circuit breaker with a spring-actuated linkage is derived, and its validation for analysis and design, particularly appropriateness for an analysis of high-speed motion behavior are checked through experiments. The dynamic model is developed through the modeling process based on ADAMS and Pro/Engineer. The simulation results of derived dynamic models for the rapid closing and opening operations are compared with actual responses using a high-speed camera and investigated to validate their usefulness.

• Molecular & Cellular Toxicology
• /
• 제2권1호
• /
• pp.7-10
• /
• 2006

We performed comprehensive SNP validation and linkage disequilibrium (LD) analysis of the c-fos induced growth factor (Figf) gene in Korean population. Out of 32 SNPs, only 9 SNPs were polymorphic in Korean population. Validated SNPs formed a single extended haplotype block with strong LD through the entire length of the gene. Tagging SNP analysis picked only 2 SNPs to represent most of the genetic variation information of the Figf gene. Our results demonstrate the utility of LD block and tagging SNP analysis for an efficient way of performing a candidate gene based association study.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.317-325
• /
• 2011

본 연구의 목적은 소아마비, 하지 근력약화 등의 장애인이 사용하는 잠금형 보조기무릎관절을 대체하기 위하여, 4절 연쇄 방식의 입각기조절형 보조기무릎관절을 개발하는 것이다. 본 연구에서 개발한 4절 연쇄 보조기무릎관절은 기존의 입각기조절형 보조기무릎관절과 달리, 기하학적으로 잠금상태가 제어되어 전기제어 부품 등이 필요하지 않으며 부피를 최소화하였다. 평가를 위하여, 소아마비로 진단받고 잠금형 보조기무릎관절을 사용해온 소아마비자가 대상자로 참여하였다. 대상자의 걸음걸이를 3차원으로 분석한 결과, 4절 연쇄 보조기무릎관절을 착용했을 때 입각기 동안 무릎관절의 신전이 유지되고 유각기 동안 무릎관절이 굴곡되며 자연스러운 걸음걸이를 보여주었다.