• Journal of Korea Multimedia Society
• /
• v.19 no.11
• /
• pp.1829-1836
• /
• 2016

Today, the application area and scope of FANET(Flying Ad Hoc Network) has been extended. As a result, FANET related research are actively conducted, but there is no decision yet as the routing protocol for FANET. In this paper, we propose the OLSR-Pds (Prediction with direction and speed) which is added a method to predict status of link for OLSR protocol. The mobility of nodes are modeled using Gauss-Markov algorithm, and relative speed between nodes were calculated by derive equation of movement, and thereby we can predict link status. An experiment for comparing AODV, OLSR and, OLSR-Pds was conducted by three factors such as packet delivery ratio, end to end delay, and routing overhead. In experiment result, we were confirm that OLSR-Pds performance are superior in these three factors. OLSR-Pds has the disadvantage that requires time-consuming calculations for link state and required for computing resources, but we were confirm that OLSR-Pds is suitable for routing to the FANET environment because it has all the characteristics of proactive protocol and reactive protocol.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.593-605
• /
• 2017

In applications which are covered wide range, it is possible that one or more number of Unmanned Aerial Vehicle(UAV) squadrons are used to perform a mission. In this case, it is most important to communicate seamlessly between the UAV squadrons. In this paper, we applied the modified OLSR(OSLR-Pds) which can prediction for state of the link for the communication in UAV squadron, and applied the modified AOMDV which can build multi-path for the communication between UAV Squadrons. The mobility of nodes are modeled using Gauss-Markov algorithm, and relative speed between nodes were calculated by derive equation of movement, and thereby we can predict link state for in a squadron and between squadrons. An experiment for comparing AODV, AOMDV and the proposed routing protocol was conducted by three factors such as packet delivery ratio, end to end delay, and routing overhead. In experiment result, we make sure that the proposed protocol performance are superior in these three factors. However, if the density of the nodes constituting FANET are too low, and if the moving speed of node is very slow, there is no difference to others protocols.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.342-347
• /
• 2003

It is essential to develop an algorithm for the estimate of link travel velocity and for the supply and control of travel information in the context of intelligent transportation information system. The paper proposes the fuzzy logic based prediction of link travel velocity. Three factors such as time, date and velocity are considered as major components to represent the travel situation. In the fuzzy modeling, those factors were expressed by fuzzy membership functions. We acquire position／velocity data through GPS antenna with PDA embedded probe vehicles. The link travel velocity is calculated using refined GPS data and the prediction results are compared with actual data for its accuracy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.40-46
• /
• 2010

DC link electrolytic capacitors are widely used in various PWM power converter system, such as adjustable speed driver(ASD) or DC/DC converter. Electrolytic capacitors, which is the most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. This objective of this paper is to propose a improvement method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC link of PWM power converter. The ESR detection scheme is based on the determination of the electrolytic capacitor AC losses calculated from voltage/current measurement using AC coupling. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity compare with BPF method. Simulation results show the veridity of the proposed on-line ESR estimation method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2484-2498
• /
• 2017

Various types of social media make the people share their personal experience in different ways. In some social networking sites. Some users post their reviews, some users can support these reviews with comments, and some users just rate the reviews as kind of support or not. Unfortunately, there is rare explicit negative comments towards other reviews. This means if there is a link between two users, it must be positive link. Apparently, the negative link is invisible in these social network. Or in other word, the negative links are redundant to positive links. In this work, we first discuss the feature extraction from social media data and propose new method to compute the distance between each pair of comments or reviews on social media. Then we investigate whether we can predict negative links via regression analysis when only positive links are manifested from social media data. In particular, we provide a principled way to mathematically incorporate multi-facet data in a novel framework, Constructing Negative Links, CsNL to predict negative links for discovering the hidden information. Additionally, we investigate the ways of solution to general negative link predication problems with CsNL and its extension. Experiments are performed on real-world data and results show that negative links is predictable with multi-facet of social media data by the proposed framework CsNL. Essentially, high prediction accuracy suggests that negative links are redundant to positive links. Further experiments are performed to evaluate coefficients on different kernels. The results show that user generated content dominates the prediction performance of CsNL.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.31-44
• /
• 2011

The applicability of network-based computing depends on the availability of the underlying network bandwidth. Such a growing gap between the capacity of the backbone network and the end users' needs results in a serious bottleneck of the access network in between. As a result, ISP incurs disadvantages in their business. If this situation is known to ISP in advance, or if ISP is able to predict traffic volume end-to-end link high-load zone, ISP and end users would be able to decrease the gap for ISP service quality. In this paper, simulation tools, such as ACE, ADM, and Flow Analysis, were used to be able to perceive traffic volume prediction and end-to-end link high-load zone. In using these simulation tools, we were able to estimate sequential transaction in real-network for e-Commerce. We also imported virtual network environment estimated network data, and create background traffic. In a virtual network environment like this, we were able to find out simulation results for traffic volume prediction and end-to-end link high-load zone according to the increase in the number of users based on virtual network environment.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.1-7
• /
• 2020

This paper proposes a link adaptation method for Underwater Internet of Things (IoT), which reduces power consumption of sensor nodes and improves the throughput of network in underwater IoT network. Adaptive Modulation and Coding (AMC) technique is one of link adaptation methods. AMC uses the strong correlation between Signal Noise Rate (SNR) and Bit Error Rate (BER), but it is difficult to apply in underwater IoT as it is. Therefore, we propose the machine learning based AMC technique for underwater environments. The proposed Modulation Coding and Scheme (MCS) prediction model predicts transmission method to achieve target BER value in underwater channel environment. It is realistically difficult to apply the predicted transmission method in real underwater communication in reality. Thus, this paper uses the high accuracy BER prediction model to measure the performance of MCS prediction model. Consequently, the proposed AMC technique confirmed the applicability of machine learning by increase the probability of communication success.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.31-44
• /
• 2004

The study of Estimation model for the short-term travel time prediction. There is a different solution which has predicted the link travel time to solve this problem. By using this solution, the link travel time is predicted based on link conditions from time to time. The predicated link travel time is used to search the shortest path. Before providing a dynamic shortest path finding, the prediction model should be verified. To verify the prediction model, three models such as Kalman filtering, Stochastic Process, ARIMA. The ARIMA model should adjust optimal parameters according to the traffic conditions. It requires a frequent adjustment process of finding optimal parameters. As a result of these characteristics, It is difficult to use the ARIMA model as a prediction. Kalman Filtering model has a distinguished prediction capability. It is due to the modification of travel time predictive errors in the gaining matrix. As a result of these characteristics, the Kalman Filtering model is likely to have a non-accumulative errors in prediction. Stochastic Process model uses the historical patterns of travel time conditions on links. It if favorably comparable with the other models in the sense of the recurrent travel time condition prediction. As a result, for the travel time estimation, Kalman filtering model is the better estimation model for the short-term estimation, stochastic process is the better for the long-term estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.34-45
• /
• 2013

Due to its self-configuring nature, the tactical mobile ad hoc network is used for communications between tactical units and the command and control center (CCC) in battlefields, where communication infrastructure is not available. However, when a tactical unit moves far away from the CCC or there are geographical constraints, the data link between two communicating nodes can be broken, which results in an invalid data route from the tactical units to CCC. In order to address this problem, in this paper we propose a hierarchical connectivity maintenance scheme, namely ADLCoM (Autonomous Data Link Connectivity Maintenance). In ADLCoM, each tactical unit has one or more GW (gateway), which checks the status of data links between tactical units. If there is a possibility of link breakage, GWs request ground or aerial unmanned vehicles to become a relay for the data link. The simulation results, based on tactical scenarios, show that the proposed scheme can significantly improve the network performance with respect to data delivery ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1248-1256
• /
• 2015

It is necessary to apply an exact data and a precise prediction model for a rain attenuation to design the link margin for a data link using Ku-band with the serious effect by rain. In this paper, we investigate the regional rainfall-rate distribution of Korea proposed in TTAK.KO-06.0122/R1 and compare it with the distribution provided by Rec. ITU-R PN.837-1 and Crane. And, the rain rate climate regions similar with the rainfall-rate distribution of Korea in Rec. ITU-R PN.837-1 and Crane model are selected. Finally, using Rec. ITU-R P.618-8 and Crane rain attenuation prediction model, we derive and analyze the rain attenuation for Ku-band frequency according to the time percentage of an average year and the distance of wireless communication link between unmanned aerial vehicle (UAV) and ground data terminal (GDT).