• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.143-146
• /
• 1987

Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

• International Journal of Reliability and Applications
• /
• v.3 no.3
• /
• pp.133-145
• /
• 2002

The traditional methods of evaluating the performance of a network by enumerating all possible states may quickly become computationally prohibitive, since the number of states grows exponentially as the number of components increases. In such cases, enumerating only the most probable states would provide a good approximation. In this paper, we propose a method which efficiently generates upper and lower bounds for coherent performance measures utilizing the most probable states. Compared with Yang and Kubat's method, our procedure significantly reduces the complexity and memory requirement per iteration for computing the bounds and thereby, achieves the given degree of accuracy or the coverage within a shorter time.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.525-529
• /
• 2016

In the case of a motor system that converts electrical energy into mechanical energy, the region of the motor and that of the generator coexists. In the case of an escalator, the ascending escalator is operated by the motor, whereas the descending escalator is operated by the generator according to the load. To evaluate the proposed method, this study reduces the power of the ascending escalator up to approximately 35% by sharing the regeneration power of the descending escalator. The loss of transfer power nearly exists in the case of the proposed method. Furthermore, the lifetime of the DC link condenser can be extended because it is connected in parallel, thus leading to a twofold increase in capacity.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.727-729
• /
• 2004

본 연구는 비정지궤도 이동위성 통신시스템에서 동일 셀과 인접 셀 내의 단말기들의 밀집도에 따른 채널용량을 비교 분석하였다. CDMA 셀룰라 시스템은 같은 시간에 같은 주파수를 모든 사용자들이 같이 사용하므로 자기 신호 외의 다른 사용자의 신호는 간섭으로 나타나 통신 품질에 영향을 미친다. 특히 동일 셀과 인접 셀에서 단말기의 분포 및 밀집도에 따라 통신link에서 간섭이 달라 질 수 있으며, 이는 곧 통신 채널에서 용량의 변화가 이루어 질 수 있다는 점으로 해석된다. 본 연구는 이동위성 통신시스템에서 간섭에 따른 효율적인 채널용량 분석에 유용하게 사용될 수 있을 것이다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1285-1289
• /
• 2008

Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.806-807
• /
• 2015

In this paper, we investigate the beam-forming technologies used for increasing the capacity of Wi-Fi systems. We present the international research trend and key technologies of some companies. Finally, we propose a technique for improving the performance of a radio link using beamforming technology in a unlicenced band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.903-912
• /
• 2001

본 논문에서는 계층적 구조를 가진 CDMA 셀룰러 시스템에서 여러 가지 자원 공유 방식들 중 주파수 공유 방식과 주파수 분할 방식의 용량을 순방향 링크에 대해 분석 비교하였다. 용량 분석은 마이크로셀 반경 및 마이크로셀 클러스터의 위치 및 매크로셀에 대한 마이크로셀의 전력 비를 고려하여 몬테카를로 시뮬레이션을 통해 수행하였다. 시뮬레이션 결과로부터 각각의 자원 공유 방식들에 대해 이러한 영향들을 분석하였고, 일반적인 설계 접근방식을 제시하였다. 또한 자원공유방식들의 성능을 용량평면도를 통해 비교하였다. 결과를 요약하면, 계층적 구조를 가진 CDMA 셀룰러 시스템에서 스펙트럼 공유 방식을 적용할 경우 순방향 링크의 용량을 최대로 하기 위해서는 마이크로셀 클러스터가 매크로셀의 중심으로부터 멀리 배치하고, 마이크로셀의 반경을 작게 하는 것이 바람직함을 알 수 있었다.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.398-406
• /
• 2013

In this paper, we investigate two types of in-phase and quadrature-phase (IQ) data transfer methods for cloud multiple-input multiple-output (MIMO) network operation. They are termed "after-precoding" and "before-precoding". We formulate a cloud massive MIMO operation problem that aims at selecting the best IQ data transfer method and transmission strategy (beamforming technique, the number of concurrently receiving users, the number of used antennas for transmission) to maximize the ergodic sum-rate under a limited capacity of the digital unit-radio unit link. Based on our proposed solution, the optimal numbers of users and antennas are simultaneously chosen. Numerical results confirm that the sum-rate gain is greater when adaptive "after/before-precoding" method is available than when only conventional "after-precoding" IQ-data transfer is available.

• Computers and Concrete
• /
• v.19 no.2
• /
• pp.179-189
• /
• 2017

Concrete shear walls are one of the major structural lateral resisting systems in buildings. In some cases, due to the change in the occupancy of the structure or functional requirements like architectural and even mechanical ones, openings need to be provided and installed in structural walls after their construction. Providing these openings may significantly influence the structural behavior of the constructed wall. This paper considers the results of a nonlinear finite element analysis of shear walls with opening strengthened by carbon fiber reinforced polymer (CFRP) strips with different configurations. Details of bond-slip constitutive model of link elements to simulate the connections of FRP strips to concrete surface is presented. The proposed model in this research has been validated using experimental results available in the literature. The results indicated that the proposed configuration of CFRP strips significantly improved the lateral resistance and deformation capacity of the shear walls with opening.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1214-1221
• /
• 2006

In this paper, development and performance characteristic of propulsion system(Converter/Inverter) using IPM(Intelligent Power Module) for 120km/h AC electric vehicle is proposed. The proposed propulsion system is comprised of IPM converter and inverter stack which uses natural air-cooling system, DC-Link, OVCRf unit and control unit. And also 2-Parallel operation of two PWM converter is adopted for increasing capacity of system and the VVVF inverter control is used a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region. The proposed propulsion system is verified by main line test results as well as combined test results.