• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.97-103
• /
• 2017

The objective of this study is to develop and commercialize an on-board fuel storage system for CNG vehicles. A type 4 vessel is made of resin-impregnated continuous filament windings on a polyamide (PA6) liner. In particular, this study localized the PA6 liner's fabrication and development. To analyze the filament winding, a specimen test was performed, and the results were verified values obtained using finite element analysis. In this study, the filament winding and fibers were optimized for a 207 bar composite cylinder in a compressed natural gas vehicle.

• 무역상무연구
• /
• 제35권
• /
• pp.71-98
• /
• 2007

UCP 600 approved at the Banking Commission Meeting of ICC at the end of October, 2006 comes into effect from July 1, 2007. The main revision of the UCP 600 concerning the sea transport document are as follows. First, if the bill of lading contains an on-board-notation, with the date of shipment, the date stated in the on-board-notation will be deemed the date of shipment. Secondly, phrases "on its face" and "otherwise authenticated" should be eliminated. Thirdly, when an agent signs for or signs on behalf of the master, there is no longer a need for the name of master to be quoted. Fourthly, the terminology "loading on-board or shipped on a named vessel" is changed to "shipped on-board a named vessel." Fifthly, phrases "the rejection of the documents transported only by sail" is removed. Finally, new rule in UCP is the signing of a charter party bill of lading by the charterer or a named agent on behalf of the charterer. My assessment of the revision in UCP 600 is as follows: Because a freight forwarder transport document is a weaker form than a liner bill of lading as collateral, banks may need a secure measure as to protect themselves from such a weak collateral effect. we recognize that Such a weak collateral effect stemmed from the elimination of rules in UCP 500 article 30, and the admission of transport documents issued by the freight forwarder as long as any one besides carrier, shipper, and charterer satisfies the requirements of transport document clauses in UCP 600. Finally, I hope the Commentary on UCP 600 will serve to explain the ambiguities remaining in the new rules.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.1-11
• /
• 2007

To evaluate the quality of waste paper used for the manufacture of linerboard, the types of papers and foreign materials in compressed waste paper currently used were investigated. The recycled fibers were obtained from printing paper, newspaper, wrapping paper, white coated paperboard and corrugated container. Their fibers were observed by using a microscope, and the mechanical properties of the recycled papers manufactured from the recycled fibers were investigated. The compressed wastepaper was composed of 54% paperboard, 20% printing paper, and 20% newsprint. The content of foreign materials was about 4%, showing higher contents compared to 1% of foreign substances provided by Korea paper manufacturers' association. The types of foreign materials were various, which include vinyls, plastics, metals, woods, styrofoams, and cloths. Sound fibers were generally observed in the recycled fibers of printing papers and wrapping paper. The recycled fibers of white coated board, corrugated container and newsprint showed to be generally damaged. The whiteness of each recycled fiber were highly affected by pulp bleaching and ink-particle mixing conditions. The values of breaking length and burst index were lower than those for corrugating medium and liner board specified in KS. Although the anatomical characteristics of recycled fibers varied, their strengths appeared to be similar. This result may be explained by the use of non-deinked fiber.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.203-206
• /
• 2005

The objective of study on composite cylinder for alternative fuel vehicle is to develop safe, efficient, and commercially viable, on-board fuel storage system for the fuel cell vehicle or natural gas vehicle that use highly compressed gaseous fuel such as hydrogen or natural gas. This study presents the whole procedure of development and certification of a type 3 composite cylinder of 207bar service pressure and 70 liter water capacity, which includes design/analysis, processing of filament winding, and validation through various testing and evaluation. Design methods of liner configuration and winding patterns are presented. Three dimensional, nonlinear finite element analysis techniques are used to predict burst pressure and failure mode. Design and analysis techniques are verified through burst and cycling tests. The full qualification test methods and results for validation and certification are presented.

• 한국포장학회지
• /
• 제5권1호
• /
• pp.13-20
• /
• 1999

Not only is it important that the physical properties of the paperboards be appropriate for the intended end use, but the proper arrangement of the component in the built-up board is essential for attaining the optimum moment of inertia and the maximum load-carrying ability in a box. It is known to be impossible to estimate the stress distribution and deflection pattern by experiments or theoretical analysis when the corrugated fiberboard get the bending force. This study was tried theoretical and finite element analysis to analyze structural strength characteristics of corrugated fiberboards. If the linerboard and corrugating medium of every corrugated fiberboards is made from the same material, the location of neutral axis comes close to inside liner in order of DMA, DM, DMB, SW and DW, and moment of inertia of area decreases in order of DMA, DMB, DW, DM and SW. With the finite element analysis, deflection of applied loads represented SW, DM, DMA, and TW in the order of their value.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.33-40
• /
• 2004

A white light interferometery (WLI) method for investigating surface microstructure was introduced. Brief description of the principle of this method was provided. The surface structure of various samples, for example, a liner board paper, a pigment coated paper, a intaglio printed paper and a polymer laminated paper were tested and characterized with the WLI method. The data showed the WLI method provided very detailed information about surface topography, which were little affected by the surface condition such as color, opacity, roughness, etc. The data stitching mode of the WLI method could provide high spatial resolution over a large field-of-view, which made it possible to obtain the statistically valid results. Fast and high repeatability also made this method a promising way for investigating the surface micro-structure of paper products and prints.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.674-690
• /
• 2021

This study proposes a hybrid marine power system combining dual-fuel generators, a fuel cell, and Vanadium Redox Flow Batteries (VRFB). Rigorous verification and validation of the dynamic modelling and integration of the system are conducted. A case study for the application of the hybrid propulsion system to a passenger ship is conducted to examine its time-variant behaviour. A comprehensive model of the reversible and irreversible capacity degradation of the VRFB stack unit is proposed and validated. The capacity retention of the VRFB stack is simulated by being integrated within the hybrid propulsion system. Reversible degradation of the VRFB stack is precisely predicted and rehabilitated based on the predefined operational schedule, while the irreversible portion is retained until the affected components are replaced. Consequently, the advantages of the VRFB system as an on-board ESS are demonstrated through the application of a hybrid propulsion system for liner shipping with fixed routes.

• 수산경영론집
• /
• 제34권1호
• /
• pp.69-85
• /
• 2003

The primary objective of this thesis is to study, case by case, the international disputes for fishing rights between fishing nations and costal states never imagined till the introduction of the UN Convention on the Law of the Sea adopted in 1982 and came into effect in November 16, 1994, which governs the high seas and EEZ in a new manner. Such a study is to provide help in the understanding on this new marine system and how to deal with. This is addressed by the perspectives of disputes (a) in the high seas between fishing nations having traditionally enjoyed the principle of the freedom of the high seas and costal states, (b) in the EEZ between fishing nations and costal states possessing the exclusive jurisdiction over living marine resources and sovereign rights for determining allowable catch and the surplus in its EEZ. The article can be divided into four main parts. First, both the general principles of the settlement of international disputes, and the nature and procedures described in the UNCLOS are introduced. Second, it gives cases of tuna long-liner, North Pacific trawler and squid jigger occurred in the coastal states EEZ, and analyses the problem in both terms of its background and final judgment. It further describes the possible issues in case it depends on the International Tribunal for the Law of the Sea for its settlement. Third, closely tied to above, important points such as the right of hot pursuit, prompt release of vessel and crew, and the limits of cooperation with costal states inspector on board fishing vessels are considered mostly based on the UNCLOS, Bilateral Agreement and UNIA. Finally, the article concludes as follows ; The need for broad analyses on the nature of international suits and legal system for the settlement, to win the case before the International Tribunal for the Law of the Sea or coastal states court, is really acknowledged. However, considering the lack of previous studies about it, it is preferably recommended that governmental efforts for making legal standards to cover the judicial costs, for helping industry out of becoming bankrupt.

• 유통과학연구
• /
• 제20권8호
• /
• pp.81-91
• /
• 2022

Purpose: The work aimed to integrate and distribute the knowledge of marketing and chemistry for product development, in which individual packaging from water hyacinth was ideal. Research design, data, and methodology: A customer perception was surveyed to guide the preparation process, and eco-packaging preparation followed the perception study. The satisfaction with the packaging using the 4Ps was determined. Results: 159 samples participated in the survey to establish their perceptions. They perceived that eco-packaging was a friendly environment with a score of 4.47. The uses of chemicals and water were less. The design for other functions than a normal function of packaging was preferred. The pulping was done using 3.0 M NaOH. The natural additives of carboxymethyl cellulose (defibering) and corn starch (adhesive) were desired. The paper was characterized according to The National Standard of Kraft paper and was equivalent to the liner board. The prototype of packaging was fabricated as individual packaging. The marketing mix was used to survey 200 samples. The satisfaction with the product was the maximum at 4.53, while the minimum was on price. The online channel was preferred to access the product. Conclusions: Water hyacinth could be added value as eco-packaging that the qualities of pulp were equal to the Kraft paper. Individual packaging from water hyacinth was satisfied.

• 공업화학
• /
• 제16권5호
• /
• pp.620-627
• /
• 2005

본 연구에서는 골판지포장재에 대하여 LCA를 수행하고 그 결과를 바탕으로 생산공정의 환경성 개선을 수행하였다. 연구범위는 원료취득단계에서부터 원단제조단계, 상자제조단계까지로 구분하여 각 단계 및 세부공정별로 LCA에 의한 환경영향을 평가하였다. 영향범주는 자원고갈, 지구온난화, 오존층고갈, 광화학산화물생성, 산성화, 부영양화, 생태독성, 인간독성의 8가지 범주로 구분하여 평가하였다. 평가결과, 전체 환경영향 중 원료취득단계에서 발생하는 영향이 약 92%로 가장 높게 차지하는 것으로 나타났으며 라이너지 제조공정에서 가장 큰 환경영향이 있는 것으로 나타났다. 원단제조단계와 상자제조단계의 공정에서 발생하는 환경영향은 원단제조단계의 주 공정인 single facer 및 D/W backer 공정에서 가장 높은 영향을 가지는 것으로 나타났다. 이와 같이 환경영향이 나타나는 주요 원인은 전력, 중유 등의 에너지인 것으로 나타났다. 또한, 포장재의 청정생산공정구축을 위하여 생산공정에 대한 진단을 수행하였다. 진단을 통하여 손모율 저감과 상자의 내압강도에 대한 개선효과를 평가하였으며, 개선 후 환경영향은 개선 전보다 약 3.8% 환경영향이 저감된 것으로 나타났다.