• Smart Structures and Systems
• /
• v.26 no.6
• /
• pp.681-692
• /
• 2020

Conventional Piezoelectric Energy Harvesters (CPEH) have been extensively studied for maximizing their electrical output through material selection, geometric and structural optimization, and adoption of efficient interface circuits. In this paper, the performance of Stepped Piezoelectric Energy Harvester (SPEH) under harmonic base excitation is studied analytically, numerically and experimentally. The motivation is to compare the energy harvesting performance of CPEH and SPEHs with the same characteristics (resonant frequency). The results of this study challenge the notion of achieving higher voltage and power output through incorporation of geometric discontinuities such as step sections in the harvester beams. A CPEH consists of substrate material with a patch of piezoelectric material bonded over it and a tip mass at the free end to tune the resonant frequency. A SPEH is designed by introducing a step section near the root of substrate beam to induce higher dynamic strain for maximizing the electrical output. The incorporation of step section reduces the stiffness and consequently, a lower tip mass is used with SPEH to match the resonant frequency to that of CPEH. Moreover, the electromechanical coupling coefficient, forcing function and damping are significantly influenced because of the inclusion of step section, which consequently affects harvester's output. Three different configurations of SPEHs characterized by the same resonant frequency as that of CPEH are designed and analyzed using linear electromechanical model and their performances are compared. The variation of strain on the harvester beams is obtained using finite element analysis. The prototypes of CPEH and SPEHs are fabricated and experimentally tested. It is shown that the power output from SPEHs is lower than the CPEH. When the prototypes with resonant frequencies in the range of 56-56.5 Hz are tested at 1 m/s2, three SPEHs generate power output of 482 μW, 424 μW and 228 μW when compared with 674 μW from CPEH. It is concluded that the advantage of increasing dynamic strain using step section is negated by increase in damping and decrease in forcing function. However, SPEHs show slightly better performance in terms of specific power and thus making them suitable for practical scenarios where the ratio of power to system mass is critical.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.1
• /
• pp.82-90
• /
• 2021

Owing to the advantages of assuring the best views and seawater exchange, submerged breakwaters have been widely installed along the eastern coast of Korea in recent years. It significantly contributes to promoting the advancement of shorelines by partially inhibiting incident wave energy. Observations were carried out by a pressure-type wave gauge in the Bongpo Beach to evaluate the coefficients of wave transmission via a submerged breakwater, and the results obtained were compared with those of existing conventional equations on the transmission coefficient derived from hydraulic experiments. After reviewing the existing equations, we proposed a transmission coefficient equation in terms of an error function. Although it exhibited robust relationships with the crest height and breaking coefficient, deviations from the observed data were evident and considered to be triggered by the difference in the incident wave climate. Therefore, in this study, we conducted a numerical experiment to verify the influence of wave period on the coefficients of wave transmission, in which we adopted a parabolic-type mild-slope equation model. Consequently, the deviation from calculated results appears to practically cover all deviation range in the observed data. The wave period and direction of the incident wave increased, the transmission coefficient decreased, and the wave direction was determined to demonstrate a relatively significant influence on the transmission coefficient. It was inferred that this numerical study is expected to be used practically in evaluating the design achievement of the submerged breakwater, which is adopted as a countermeasure to coastal beach erosion.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.947-956
• /
• 2020

The human body becomes vulnerable to various diseases due to deterioration in structure and function as it ages. In particular, changes in brain structure weaken the immune system against diseases such as vascular and metabolic neuropsychiatric diseases. In this study, we used a magnetic resonance imaging technique that allows non-invasive observation of brain structures and measurement of how the volumes of the brain, gray matter, white matter, and subcortical regions changes with aging in women aged 65 to 85 years. As a result of our investigation, we observed a significant linear decrease in subcortical regions with age. These results suggest that the changes due to aging in the brain structure area are closely related to neuropsychiatric diseases in old age, and can provide information in understanding the vulnerability of the brain in old age.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.483-488
• /
• 2020

In recent years, the demand for wireless devices incorporating several wireless communication systems into one has been increasing in order to provide services that meet the diverse needs of consumers. Wireless devices consisting of various wireless communication systems require many frequency fixed filters. A frequency tunable filter can replace a number of frequency fixed filters in the wireless devices. If a frequency tunable filter is used in wireless systems, the system can be configured more efficiently. In this paper, a 3-pole frequency tunable BPF(bandpass filter) operating in the frequency band of 800 ~ 2400MHz is designed. In order to widen the operating frequency band, a tuning screw is designed to have a step and a linear motor is used to facilitate the adjustment of the tuning screw. The implemented frequency tunable BPF operates in the designed frequency range and has the maximum insertion loss of 2.82dB in the channel band and the minimum attenuation of 18.7dB at ± 50MHz frequency offset from the center frequency of the band.

• Journal of Integrative Natural Science
• /
• v.13 no.4
• /
• pp.132-140
• /
• 2020

With the recent introduction of artificial intelligence (AI) technology, the use of data is rapidly increasing, and newly generated data is also rapidly increasing. In order to obtain the results to be analyzed based on these data, the first thing to do is to classify the data well. However, when classifying data, if only one classification technique belonging to the machine learning technique is applied to classify and analyze it, an error of overfitting can be accompanied. In order to reduce or minimize the problems caused by misclassification of the classification system such as overfitting, it is necessary to derive an optimal classification by comparing the results of each classification by applying several classification techniques. If you try to interpret the data with only one classification technique, you will have poor reasoning and poor predictions of results. This study seeks to find a method for optimally classifying data by looking at data from various perspectives and applying various classification techniques such as LDA and QDA, such as linear or nonlinear classification, as a process before data analysis in data analysis. In order to obtain the reliability and sophistication of statistics as a result of big data analysis, it is necessary to analyze the meaning of each variable and the correlation between the variables. If the data is classified differently from the hypothesis test from the beginning, even if the analysis is performed well, unreliable results will be obtained. In other words, prior to big data analysis, it is necessary to ensure that data is well classified to suit the purpose of analysis. This is a process that must be performed before reaching the result by analyzing the data, and it may be a method of optimal data classification.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.6
• /
• pp.37-46
• /
• 2006

It is known to be hard to apply cryptographic one-way functions to the recognition system using bio-information directly. As one of the solutions about that problem there is a permutation transformation scheme. However, they did not show my algorithmic behavior or any performance analysis of the transformation by experiment. In this paper, by showing the recognition ratio of the transformed scheme by experiment, we prove that that scheme is sound. Also, we adopt their transformation to LDA(Linear Discriminant Analysis) to show the experimental results. In the negative side, we introduce a new type of attack against the permutation transformation schemes. finally, we briefly mention a generalization of the permutation transformation for countermeasure of the attack at the end of this paper.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.97-110
• /
• 2020

The global pandemics occurred in 2020 had a great economic impact on the world, and the impact was especially greater on self-employed people who were heavily affected by the floating population and tourism industry. To solve this problem, each country implemented emergency disaster support policies, and it was difficult to select the criteria and scope. The following research carried out two results. First, after analyzing the impact of global pandemics on the local economy, an economical index was defined that could explain the impact intuitively. Second, we propose linear programming methods to provide optimal budget policy using defined indicators, which present economic shock indicators and optimal years that can be considered quickly and easily by the government. Finally, the limitations and implications of the proposed study model are introduced.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.3
• /
• pp.237-246
• /
• 2021

The ILI, developed by the IWA (International Water Association), has been used in many countries as an indicator of water leakage. In Korea, the revenue water has been used as a performance indicator for waterworks although there is an opinion to replace it with the ILI. Hence, it has been necessary to investigate whether the ILI can replace the revenue water in Korea. The four main operating indicators (i.e., water service population, profit-loss ratio, fiscal self-reliance, and aged pipe rate) of 162 Korean waterworks were compared with the ILI with the linear regression method. Local water authorities with more than 1 million water service population, with more than 60% profit-loss ratio, more than 40% and less than 60% fiscal self-reliance, and more than 20% aged pipe rate showed meaningful correlation between the four parameters and the ILI. In the remaining cases, their correlations were little or weak. This means that using the ILI may not be an efficient method to represent the performance of the water supply system in Korea because of the lack of UARL (Unavoidable Annual Real Losses) data accuracy. To use the ILI in Korea, it will be required to carry out an additional research to accumulate reliable CARL (Current Annual Real Losses) and UARL data in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.24-35
• /
• 2021

Due to increasing awareness on the treatment of end-of-use/life products, disassembly has been a fast-growing research area of interest for many researchers over recent decades. This paper introduces a novel lot-sizing problem that has not been studied in the literature, which is the service-parts lot-sizing with disassembly option. The disassembly option implies that the demands of service parts can be fulfilled by newly manufactured parts, but also by disassembled parts. The disassembled parts are the ones recovered after the disassembly of end-of-use/life products. The objective of the considered problem is to maximize the total profit, i.e., the revenue of selling the service parts minus the total cost of the fixed setup, production, disassembly, inventory holding, and disposal over a planning horizon. This paper proves that the single-period version of the considered problem is NP-hard and suggests a heuristic by combining a simulated annealing algorithm and a linear-programming relaxation. Computational experiment results show that the heuristic generates near-optimal solutions within reasonable computation time, which implies that the heuristic is a viable optimization tool for the service parts inventory management. In addition, sensitivity analyses indicate that deciding an appropriate price of disassembled parts and an appropriate collection amount of EOLs are very important for sustainable service parts systems.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.1
• /
• pp.103-109
• /
• 2021

PURPOSE: This study examined the effects of the Visual Analog Scale (VAS) and knee function index on the knee strength and endurance in the national male field-hockey athletes. METHODS: Twenty-four male field-hockey athletes with a painful knee who trained at the national training center in 2019 were enrolled. The VAS and knee function index questionnaire were used to evaluate the degree of pain and functional state of the knee. The muscle strength and endurance of the knee were measured by Biodex (System 4, USA). The Pearson product moment correlation was performed to examine the effects of the VAS and knee function index the of knee on the strength and endurance. In addition, the VAS and knee function index and muscle strength and muscle endurance were examined to determine the relationship using Simple Linear Regression. The statistical significance level was α=.05. RESULTS: An analysis of the correlation between VAS and knee function index and muscle strength and muscle endurance revealed the VAS and knee function index to be statistically significant (r = .700). In addition, the extensor muscle strength, knee VAS (r = -.457), and knee function index (r = -.414) were also statistically significant. A 1-point increase in the VAS and knee function index was associated with an approximately 9.881 and 1.006 extensor muscle strength. CONCLUSION: The VAS and knee function index of field-hockey athletes are related to the strength of the knee extensors. Therefore, field-hockey athletes should develop a program to strengthen the extensor muscle strength of the knee.