• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.7
• /
• pp.490-497
• /
• 1988

This paper is concerned with the robust stability of linear quadratic state feedback regulators for infinite dimensional systems in the presence of system uncertainties Several robustness results ensuring the asymptoitc stability and exponential stability of the perturbed closed loop system are derived for a class of nonlinear perturbations of the system and input operators satisfying the matching condition. For the case where the input space is finite dimensional, some robust properties of the state feedback regulator designed on the basis of the linear quadratic regulator for finite dimensional unstable modes are also discussed seperately.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.206-209
• /
• 1988

For feedback control of a linear dynamic system the optimum linear slace regulator (OLSR) can be implemented only if all state are available for feedback. This work demonstrates that when only the output state is available for feedback, a nonlinear controllers can be improved performance over that obtained by a proportional controller. This paper found the optimal control law by well-known dynamic programming and principles of optimality. Thus, performance of both proportional and nonlinear controllers is compared with performance of optimum linear state regulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.86-89
• /
• 1986

This paper presents a design methodology for a PID regulator. The parameters of the PID regulator are determined through equivalent structure to the closed-loop system whose feedback gain assigns prescribed eigenvalues of the closed-loop system and minimizes a given performance index.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.80-82
• /
• 1979

While the standard linear-quadratic-Gaussian problem has fixed horizons, this paper considers the LQG problem with moving horizons. By the separation principle the solution will be given by the kalman filter with the approaching horizon and the LQ regulator with the receding horizon. Sufficient conditions on weighting matrices are derived under which the filter and regulator are asymptotically stable. It wall be shown that the computation method of the moving-horizon LQG regulators is better than that of the standard LQG regulator. The performance measure between the two optimal controls will be compared. A simulation result is given in order to show the usefulness of the moving-horizon LQG regulator.s

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.405-410
• /
• 1994

The purpose of this paper is to present the details of design procedure of a nonlinear regulator by Riemannian geometric approach and to applied it to the case of a double-effect evaporator. A nonlinear geometric model is proposed on a direct sum space of a state vector and a control vector as well as in the previous parers by the authors. The geometric model is derived by replacing the orthogonal straight coordinate axes of a linear system on the direct sum space with the curvilinear coordinate axes. The integral manifold of the geometric model becomes homeomorphic to that of fictitious linear system. For the geometric model a nonlinear regulator with a performance index is designed renewedly by the procedure of optimization. The construction method of the curvilinear coordinate axes on which the nonlinear system behaves as a linear system is discussed. To apply the above regulator theory to double-effect evaporators especially to the pilot plant at the University of Alberta, a suitable nonlinear model is determined by the plant dynamics. The optimal control law is derived through the calculation of the homeomorphism. As a result it is confirmed that the regulator is effective and superior to that of the conventional control.

• Smart Structures and Systems
• /
• v.20 no.6
• /
• pp.657-668
• /
• 2017

In this research, an active vibration suppression of a smart beam having piezoelectric sensor and actuators is investigated by designing separate controllers comprising a linear quadratic regulator and a neural network. Firstly, design of a smart beam which consists of a cantilever aluminum beam with surface bonded piezoelectric patches and a designed mechanism having a micro servomotor with a mass attached arm for obtaining variations in the frequency response function are presented. Secondly, the frequency response functions of the smart beam are investigated experimentally by using different piezoelectric patch combinations and the analytical models of the smart beam around its first resonance frequency region for various servomotor arm angle configurations are obtained. Then, a linear quadratic regulator controller is designed and used to simulate the suppression of free and forced vibrations which are performed both in time and frequency domain. In parallel to simulations, experiments are conducted to observe the closed loop behavior of the smart beam and the results are compared as well. Finally, active vibration suppression of the smart beam is investigated by using a linear controller with a neural network based adaptive element which is designed for the purpose of overcoming the undesired consequences due to variations in the real system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.26-30
• /
• 2005

An LMI based method to construct a decentralized control law for large scale systems is discussed. It is extended to assure the stability not only of the overall system but also of each subsystem without interconnection. Then, it is simplified to have local feedback loops only for some selected subsystems.

• 전기의세계
• /
• v.23 no.1
• /
• pp.69-72
• /
• 1974

This paper deals with an analytical design of a feedback regulator with vector input is discrete linear time-invariant systems. We have derived some relations such that the eigenvalues of a system plant with vector input under the time-optimal control strategy can be arbitrarily changed by the characteristics of the minor loop compensator which is indroduced in the feedback path.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.219-224
• /
• 1992

This paper deals with the linear quadratic optimal regulator problem for descriptor systems without performing a preliminary transformation for a descriptor system. We derive a generalized Riccati differential equation (GRDE) based on the two-point boundary value problem for a Hamiltonian equation. We then obtain an optimal feedback control and the optimal cost in terms of the solution of GRE. A simple example is included.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.198-202
• /
• 1987

The regulator problem can be considered as some impulsive disturbance rejection one. In this point of view, the rate of decay is one of important factors for regulation and depends on how negative the real parts of the eigenvalues of closed-loop system. The algorithm that the closed-loop system has eigenvalues lying within a vertical. strip is useful for rapid disturbance rejection. This paper presents a design method for a linear quadratic regulator of two-time scale system with eigenvalues in a vertical strip by use of time-scale separation property.