• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.43-45
• /
• 1999

This paper is presented about the development of magnetic levitation conveyor with a transverse flux linear synchronous motor (TFLSM). The TFLSM is proposed as the new type linear motor for the conveyor driving system. The flux density distribution. the thrust and etc. of TFLSM are analyzed by the finite element method. To analyze the dynamic characteristics of TFLSM, the parameter of equivalent circuit is calculated by the analytical method.

• 대한전기학회논문지
• /
• 제38권10호
• /
• pp.811-819
• /
• 1989

An analysis method about Transverse Edge Effect is suggested which can be applied even in transversal decline when the mover of linear induction motor runs along a curvilinear path. The criteria for linear induction motor design is proposed by indentifying the influence of the ratio of width and displacement of primary and secondary.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.105-108
• /
• 2001

In this paper, design procedures of a linear induction motor(LIM) with squirrel cage secondary are presented. The electrical and magnetic loadings are determined by the conventional criteria of the linear induction motors with sheet secondary. Electromagnetic fields of the designed motor are analyzed using finite element method, and characteristics of thrust and currents are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.500-502
• /
• 1998

This paper proposes position controller of linear motor using adaptive control algorithm. Some simulation results show the feasibility of the proposed controller for tracking control of linear motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.903-904
• /
• 2006

This paper deals with analysis of linear switched reluctance motor at high speed. First, we defined turn-on position at inductance profile. Second, in turn-on section, we analyzed characteristic of linear switched reluctance motor according to speed. Also, we used finite element method at analysis process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.140-142
• /
• 2001

In this paper, we designed a high precision Linear Motor Driver with 120 commutation method. It was composed of three parts which were divided into Power and Inverter Circuit, Analog Circuit with PWM Generation and Fault Protections, and Logic Circuit We selected LC-DSP by MEI for testifying a high accuracy of a designed driver. We proved the propriety as measured the accuracy with each velocity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.166-168
• /
• 2008

This paper presents a vector control of Linear Induction Motor(LIM) based on a slip frequency control. And a Linear Induction Motor modeling included the end effect using circuit and equation method is also presented. We demonstrated through simulation the improvements achieved by the proposed scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.997-1000
• /
• 1993

This paper proposes the linear induction motor with salient poles, transverse flux and the secondary aluminum conductor for a new type urban MAGLEV. Compared with the more usual kind of linear induction motor with longitudinal flux, TFLIM have flux paths tying transversely to the direction of motion. This shortens the magnetic circuit and produces the thrust, the attraction force and the lateral stabilization force simultaneously. Owing to these electrodynamic force, TFLIM will be usable to a new type urban MGLEV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.300-302
• /
• 1999

The standing waves of the fourth bending mode of vibration and first longitudinal mode of vibrator were utilized to construct a ultrasonic linear motor. The geometrical dimensions of the vibrator were determined by Euler-Bernoulli theoty. FEM(finite element method) employed to calculate the vibration mode of the metal-piezoceramic composite thin plate vibrator. ANSYS was used to design positions of the projections and calculate displacement of vibrator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.302-309
• /
• 2008

This paper presents a vector control of Linear Induction Motor base on a slip frequency control. And a linear induction motor modeling included the end effect using circuit and equation method is also proposed. We demonstrated through simulation the improvements achieved by the proposed scheme.