• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.271-278
• /
• 1993

Optimal biodegradation kinetics models to the initial nonylphenol ethoxylates-30 concentration were investigated and had been fitted by the linear regression. Microorganisms capable of degrading nonylphenol ethoxylates-30 were isolated from sewage near Ulsan plant area by enrichment culture technique. Among them, the strain designated as EL-10K had the highest biodegradability and was identified as Pseudomonas from results of taxonomical studies. The optimal conditions for the biodegradation were 1.0 g/ι of nonylphenol ethoxylates-30 and 0.02 g/ι of ammonium nitrate at pH 7.0 and 3$0^{\circ}C$. The highest degradation rate of nonylphenol ethoxylates-30 was about 89% for 30 hours incubation on the optimal condition. Biodegradation data were fit by linear regression to equations for 3 kinetic models. The kinetics of biodegradation of nonylphenol ethoxylates was best described by first order model for 0.1 $\mu\textrm{g}$/ι nonylphenol ethoxylates-30 ; by Monod no growth model and Monod with growth model for 0.5 $\mu\textrm{g}$/mι and 1.0, 5.0 $\mu\textrm{g}$/mι, respectively.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.137-141
• /
• 2010

Sodium nitrite is widely used as one of the popular corrosion inhibitors for the protection of ferrous metal in closed cooling water system, such as a diesel engine and a chiller. The optimum treatment conditions are studied through laboratory tests using linear polarization resistance (LPR) technique. Corrosion rate of the carbon steel electrode could be maintained less than $2.5{\times}10^{-3}$ mmpy in the test condition of 500 ppm as ${NO_2}^-$, 200 ppm as $Cl^-$, $70^{\circ}C$ and pH 6.8. The pH control is confirmed not to be an important factor in the protection of carbon steel by sodium nitrite inhibitor. The addition of tolyltriazole was needed for the protection of the copper alloy in the sodium nitrite treatment system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.213-217
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ additive in cyclic modulation manner, the dominant formation of the nanosized carbon coils could be achieved with maintaining the minimized sulfur additive amount. The geometry variation of the as-grown carbon coils, such as linear type, microsized coil type, wavelike nanosized coil type, and nanosized coil type, were investigated according to the different cyclic modulation manner of $SF_6$ flow. $SF_6$ gas incorporation develops the coil-type geometry. Furthermore, the higher flow rate of $SF_6$ gas increased the amount of the nanosized carbon coils. The slightly increased etching ability by $SF_6$ addition seems to be the cause for these results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.337-345
• /
• 2003

In the case of heat exchangers operating under frosting condition, the growth of frost layer causes the heat exchanger to increase the thermal resistance and pressure loss of the air flow. In this paper, a transient characteristic prediction model of the heat transfer for multi inverter heat pump with frosting on its surface was presented taking into account the change of the fin efficiency due to the growth of the frost layer. In this dynamic simulation program, which was peformed for a basic air conditioning system model, such as evaporator, condenser, compressor, linear electronic expansion valve (LEV) and bypass circuit. The theoretical model was driven from the obtained heat transfer coefficient and mass transfer coefficient, independently. And we consider heat transfer performance was only affected by a decrease of the wind flow area. The calculated results were compared with some cases of experiments for frosting conditions.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.3
• /
• pp.113-122
• /
• 2004

In case of heat exchangers operating under frosting condition, the thermal resistance and the air-side pressure loss increase with a growth of frost layer. In this paper, a transient characteristic prediction model of the heat transfer for a multi-inverter heat pump with frosting on its surface was presented by taking into account the change of the fin efficiency due to the growth of the frost layer. This dynamic simulation program was developed for a basic air conditioning system composed of an evaporator, a condenser, a compressor, a linear electronic expansion valve, and a bypass circuit. The theoretical model was derived from measured heat transfer and mass transfer coefficients. We also considered that the heat transfer performance was only affected by the decrease of wind flow area. The calculated results were compared with the experimental results for frosting conditions.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1549-1556
• /
• 2011

In this paper, we give an estimate on the difference between $x^n(t)$ and x(t) and it clearly shows that one can use the Picard iteration procedure to the approximate solutions to stochastic functional differential equations with infinite delay at phase space BC(($-{\infty}$, 0] : $R^d$) which denotes the family of bounded continuous $R^d$-valued functions ${\varphi}$ defined on ($-{\infty}$, 0] with norm ${\parallel}{\varphi}{\parallel}={\sup}_{-{\infty}<{\theta}{\leq}0}{\mid}{\varphi}({\theta}){\mid}$ under non-Lipschitz condition being considered as a special case and a weakened linear growth condition.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.1
• /
• pp.13-30
• /
• 2007

In this paper we study the numerical solutions of the stochastic functional differential equations of the following form $$du(x,\;t)\;=\;f(x,\;t,\;u_t)dt\;+\;g(x,\;t,\;u_t)dB(t),\;t\;>\;0$$ with initial data $u(x,\;0)\;=\;u_0(x)\;=\;{\xi}\;{\in}\;L^p_{F_0}\;([-{\tau},0];\;R^n)$. Here $x\;{\in}\;R^n$, ($R^n$ is the ${\nu}\;-\;dimenional$ Euclidean space), $f\;:\;C([-{\tau},\;0];\;R^n)\;{\times}\;R^{{\nu}+1}\;{\rightarrow}\;R^n,\;g\;:\;C([-{\tau},\;0];\;R^n)\;{\times}\;R^{{\nu}+1}\;{\rightarrow}\;R^{n{\times}m},\;u(x,\;t)\;{\in}\;R^n$ for each $t,\;u_t\;=\;u(x,\;t\;+\;{\theta})\;:\;-{\tau}\;{\leq}\;{\theta}\;{\leq}\;0\;{\in}\;C([-{\tau},\;0];\;R^n)$, and B(t) is an m-dimensional Brownian motion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.1 no.3
• /
• pp.149-152
• /
• 1988

Postweaning performances of steer from 11 to 18 months of age under intensive feedlot condition were examined in Brahman and Santa Gertudis cattle breeds which have been established in Paraguay. Fitting of growth data in each breed to an empirical growth model with non-linear least square analysis resulted in the following age(t; months) - weight(w; kg) function made out each breed: w=638.26($1-2.341e^{-0.010965t}$) for Brahman and w=716.38($1-2.365e^{-0.10741t}$) for Santa Gertrudis. The estimated mature size of Brahman steers(638 kg) was 11% lower than that of Santa Gertrudis steers(716 kg). However, slightly larger k value (rate of maturing) of Brahman steer in the mechanistic model suggested relatively earlier maturing tendency in the breed. No significant differences in dressing percentage (Brahman, 59.3%; Santa Gertrudis, 58.8%) of chilled carcass weight to live-weight were observed between breed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.4
• /
• pp.172-183
• /
• 2009

For the effects of the nonlinear temperature profiles and reduced-gravity conditions we conduct a two-dimensional numerical modeling and simulations on the physical vapor transport processes of $Hg_2Cl_2-Xe$ system in the horizontal orientation position. Our results reveal that: (1) A decrease in aspect ratio from 5 to 2 leads to an increasingly nonuniform interfacial distribution and enhances the growth rate by one-order magnitude for normal gravity and linear wall temperature conditions. (2) Increasing the molecular weight of component B, Xenon results in a reduction in the effect of solutal convection. (3) The effect of aspect ratio affects the interfacial growth rates significantly under normal gravity condition rather than under reduced gravitational environments. (4) The transition from the convection-dominated regime to the diffusion-dominated regime ranges arises near at 0.1g$_0$ for operation conditions under consideration in this study.

• The Korean Journal of Malacology
• /
• v.32 no.3
• /
• pp.189-195
• /
• 2016

The growth of manila clam Ruditapes philippinarum inhabiting culturing ground was studied in west coast Gomso tidal flat of Korea, from August 2000 to July 2001. The density of the clam was the highest in November 2000, showing a monotonic decrease afterwards over the study period. Mean density was $1,224ind./m^2$ during the study period. Size frequencies of the clam showed a unimodal distribution, and its mode increased with shell growth over time. Although the growth of shell length of manila clam was monotonic, the growth rates decreased between July 2001 and February 2002 and increased from March 2002. The biomass of the clam also increased with time, in which the increments becoming larger since March 2002. The clam shell length had linear relationship to shell height, and had logarithmic relationship to total weight, meat wet weight, dry meat weight, and AFDW. Condition index of the clam increased continuously until April, decreasing afterwards in 2001. The pattern was similar in 2002. Based on fluctuations in condition index, the spawning time of manila clam in Gomso tidal flat is inferred to be between May and October. These results suggested that optimal harvests can be made before summer season when growth decreased and mass mortality occurred, after 24 months of seed shell release.